Loading ...
Sorry, an error occurred while loading the content.

Re: [MedievalSawdust] Food-Safe finish -can be modern

Expand Messages
  • Bobby Bourgoin
    Thanks,I’ll look into this on for sure... Bobby From: James Daily Sent: Wednesday, July 18, 2012 11:57 AM To: medievalsawdust@yahoogroups.com Subject: Re:
    Message 1 of 10 , Jul 19, 2012
    • 0 Attachment
      Thanks,I’ll look into this on for sure...
       
      Bobby
       
      Sent: Wednesday, July 18, 2012 11:57 AM
      Subject: Re: [MedievalSawdust] Food-Safe finish -can be modern
       
       

      Pure walnut oil and tung oil are food safe, but they're also derived from tree nuts, which can present an allergy concern for some.  Pure linseed oil is likewise certainly food safe, but getting real boiled linseed oil (i.e. linseed oil that has been boiled as opposed to treated with drying agents) is not easy.  Someone else may be able to recommend a source.
       
      If you want a guaranteed food-safe modern finish, then there are food-safe polyurethane finishes such as EZ-DO, which is FDA approved.  We've used it to finish our cider press (made of maple) and it looks very nice.  It's not cheap, though ($37 plus $10 shipping for a pint; here's another supplier that might be slightly cheaper). It's rated for a few years of use between reapplications.  It has the advantage of being alcohol resistant, which I'm not sure if the oil finishes are.  I don't know about hot liquids, but I suspect it's okay as long as they aren't boiling.
       
       
      On Jul 18, 2012, at 10:46 AM, Bobby Bourgoin wrote:

       
       
      Greetings;
      I remember reading a string of mails about this subject, but can remember the outcome...
      What wood finish (can be modern like varnish, or Minwax, or whatever) is food-safe?
      I would like a really hard finish for a wood plate, bowl, mug, and pitcher.  These can/will hold food and liquids both hot and cold for extended periods of time, and will most-likely see fairly hard use.  I am not fond of having to reapply a finish every month or so, multiple coats at the finish stage of the product is normal, but having to reapply after use is a pain...
       
      As mentioned this finish can be modern (or not), please help, any ideas
       
      Bobby
       

    • Fred Vance
      Yes Sir, EnviroTex Lite can be brushed on. I ve used it on leather vessels also...people wanting alcohol proof finishes...
      Message 2 of 10 , Jul 19, 2012
      • 0 Attachment
        Yes Sir, EnviroTex Lite can be brushed on. I've used it on leather vessels also...people wanting alcohol proof finishes...

        --- In medievalsawdust@yahoogroups.com, Bobby Bourgoin <bobby.bourgoin@...> wrote:
        >
        > Thanks just what I was looking for, if it can be brushed and not just poured, cause I don’t want to fill my bowl and pitcher with plastic, but coat it...
        >
        > Bobby
        >
        > From: Fred Vance
        > Sent: Wednesday, July 18, 2012 3:12 PM
        > To: medievalsawdust@yahoogroups.com
        > Subject: [MedievalSawdust] Re: Food-Safe finish -can be modern
        >
        >
        > I've used a product called EnviroTex Lite by Environmental Technology, Inc. Our local craft store carries it in pint, quart, and gallon. Hope this is a Help.
        >
        > --- In mailto:medievalsawdust%40yahoogroups.com, Bobby Bourgoin <bobby.bourgoin@> wrote:
        > >
        > > Greetings;
        > > I remember reading a string of mails about this subject, but can remember the outcome...
        > > What wood finish (can be modern like varnish, or Minwax, or whatever) is food-safe?
        > > I would like a really hard finish for a wood plate, bowl, mug, and pitcher. These can/will hold food and liquids both hot and cold for extended periods of time, and will most-likely see fairly hard use. I am not fond of having to reapply a finish every month or so, multiple coats at the finish stage of the product is normal, but having to reapply after use is a pain...
        > >
        > > As mentioned this finish can be modern (or not), please help, any ideas
        > >
        > > Bobby
        > >
        >
      • Bobby Bourgoin
        Thanks, I’m seriously considering this one... From: Fred Vance Sent: Thursday, July 19, 2012 9:42 AM To: medievalsawdust@yahoogroups.com Subject:
        Message 3 of 10 , Jul 19, 2012
        • 0 Attachment
          Thanks, I’m seriously considering this one...
           
          Sent: Thursday, July 19, 2012 9:42 AM
          Subject: [MedievalSawdust] Re: Food-Safe finish -can be modern
           
           

          Yes Sir, EnviroTex Lite can be brushed on. I've used it on leather vessels also...people wanting alcohol proof finishes...

          --- In mailto:medievalsawdust%40yahoogroups.com, Bobby Bourgoin <bobby.bourgoin@...> wrote:

          >
          > Thanks just
          what I was looking for, if it can be brushed and not just poured, cause I don’t want to fill my bowl and pitcher with plastic, but coat it...
          >
          > Bobby
          >
          > From: Fred Vance
          > Sent: Wednesday, July
          18, 2012 3:12 PM
          > To:
          href="mailto:medievalsawdust%40yahoogroups.com">mailto:medievalsawdust%40yahoogroups.com
          > Subject: [MedievalSawdust] Re: Food-Safe finish -can be modern
          >
          >
          > I've used a product called EnviroTex Lite by Environmental
          Technology, Inc. Our local craft store carries it in pint, quart, and gallon. Hope this is a Help.
          >
          > --- In
          mailto:medievalsawdust%40yahoogroups.com, Bobby Bourgoin <bobby.bourgoin@> wrote:
          > >
          > > Greetings;
          > > I remember reading a
          string of mails about this subject, but can remember the outcome...
          > >
          What wood finish (can be modern like varnish, or Minwax, or whatever) is food-safe?
          > > I would like a really hard finish for a wood plate,
          bowl, mug, and pitcher. These can/will hold food and liquids both hot and cold for extended periods of time, and will most-likely see fairly hard use. I am not fond of having to reapply a finish every month or so, multiple coats at the finish stage of the product is normal, but having to reapply after use is a pain...
          > >
          > > As mentioned this finish can be modern (or
          not), please help, any ideas
          > >
          > > Bobby
          > >
          >

        • Avery Austringer
          According to one of the woodworking magazines (American Woodworker I think, but don t quote me on it) virtually all modern poly finishes are food safe IF you
          Message 4 of 10 , Jul 19, 2012
          • 0 Attachment
            According to one of the woodworking magazines (American Woodworker I think, but don't quote me on it) virtually all modern poly finishes are food safe IF you let them dry thoroughly.  The solvents being the hazardous component. 

            There is a big difference ($) between being food safe and jumping through the hurdles required to be able to say your food safe, but as they say in the Pharmaceutical industry (at least in the conscientious parts of the industry), you can't test safety into your product.

            Avery
          • Tom Immke
            I am fairly new to this group and don t talk much, but I learn a lot. This is however is of significant interest to me. I have been searching for over a year
            Message 5 of 10 , Jul 19, 2012
            • 0 Attachment
              I am fairly new to this group and don't talk much, but I learn a lot.   This is however is of significant interest to me.   I have been searching for over a year for a food safe finish that is FDA approved.  I manufacture tankards and have to be very careful what I apply.  I have used everything from different oils (including a salad bowl finish) to epoxy's.  According to the sales people in the stores, all over the counter finishes are "food safe" once cured BUT beware.  The manufacturers do NOT state this, probably for legal reasons.
              What ever you use get the MSDS sheet and look it over, most are online from the manufacturer. If you understand it like me I still end up calling the company to verify.  Certain finishes have different specifications and will deteriorate with certain liquids.... and temperatures.  I have only found one FDA approved finish I can use for my products that will tolerate alcohol and heat, but I look all the time for faster and better finishes.
              Just do a bit of research to be safe.

              Tom

               Thu, Jul 19, 2012 at 12:05 PM, Avery Austringer <avery1415@...> wrote:
               

              According to one of the woodworking magazines (American Woodworker I think, but don't quote me on it) virtually all modern poly finishes are food safe IF you let them dry thoroughly.  The solvents being the hazardous component. 

              There is a big difference ($) between being food safe and jumping through the hurdles required to be able to say your food safe, but as they say in the Pharmaceutical industry (at least in the conscientious parts of the industry), you can't test safety into your product.

              Avery


            • Bobby Bourgoin
              Thanks to all who answered. It’s been VERY helpful. Bobby From: Bobby Bourgoin Sent: Wednesday, July 18, 2012 11:46 AM To: Groups Medieval Sawdust Subject:
              Message 6 of 10 , Jul 21, 2012
              • 0 Attachment
                Thanks to all who answered. It’s been VERY helpful.
                 
                Bobby
                 
                Sent: Wednesday, July 18, 2012 11:46 AM
                Subject: [MedievalSawdust] Food-Safe finish -can be modern
                 
                 

                Greetings;
                I remember reading a string of mails about this subject, but can remember the outcome...
                What wood finish (can be modern like varnish, or Minwax, or whatever) is food-safe?
                I would like a really hard finish for a wood plate, bowl, mug, and pitcher.  These can/will hold food and liquids both hot and cold for extended periods of time, and will most-likely see fairly hard use.  I am not fond of having to reapply a finish every month or so, multiple coats at the finish stage of the product is normal, but having to reapply after use is a pain...
                 
                As mentioned this finish can be modern (or not), please help, any ideas
                 
                Bobby
              Your message has been successfully submitted and would be delivered to recipients shortly.