Re: [MedievalSawdust] Re: Resaw question
- Good luck on my end. Thank you all for the advice. I got ahold of the local community college framing and construction department. I have an appointment to get the pieces resawn.Avery, cool pics, but how is it used?Thanks everyone.Jovian
- I have had success using a thin blade pull saw. I have cut shavings to an 1/16th of an inch. Lowe's currently carries Japanese style saws under the name of Bear. No bamboo handle but a nice thin blade. I use them allot for dovetailing and other joinery involved in box and bow making. Price is good; under 20 bucks but there is a learning curve. Do not force, let the saw do the work. And remember, it's a pull saw not a push.Lagerstein----- Original Message -----From: Avery AustringerSent: Tuesday, April 10, 2012 6:37 PMSubject: [MedievalSawdust] Re: Resaw question
> I feel kinda bad asking another question...
Don't - people discussing solutions for a problem someone is having is one of the big differences between this list and a lot of Yahoo groups that are just hanging on out there.
> I have a piece of 1x12 soft maple (3/4" thick) and I'd like to get 3 soundboards out of it. Any ideas?
How thick do these need to be? I ask because even with a good band saw, take away two kerf thicknesses and you're talking about â3/16 pieces of wood only if your cut is perfectly straight and vertical.
Depending on how often you have to do this and how much of an exciting learning experience you are up for you could make a veneer saw (the traditional making logs into veneer kind, see about half way down here: http://www.antiqbuyer.com/All_Archives/TOOLS_ARCHIVE/archive-saws.htm) and cut it by hand. Plus, you get to look all smug and stuff because you can tell people you cut it by hand with a tool you made yourself. Highland Working and Traditional Woodworker both will sell you a rip blade for a frame saw for less that $20.
If you go this route, go all around the piece first with a marking gauge. It will make keeping things straight a lot easier.
- Went to our local community college and got 2 boards resawn for free! Cool shop to boot, must find a way to take classes there.Thanks for the suggestion.Grace and Peace,Jovianp.s. Found these shop tips. I already knew a few of them. Others will be incorporated immediately.
> Went to our local community college and got 2 boards resawn for free! CoolCheck their rates, but a community college adult ed. shop class is often a
> shop to boot, must find a way to take classes there.
> Thanks for the suggestion.
> Grace and Peace,
cheap way to get access to some major power tools in a large space. Often
you learn or show you know the basics and after that can just work on your
- Even larger colleges often have night courses. I took bronze casting, and many of my fellow students had been taking the same course for 10 years for access to the equipment.
--- In email@example.com, conradh@... wrote:
> > Went to our local community college and got 2 boards resawn for free! Cool
> > shop to boot, must find a way to take classes there.
> > Thanks for the suggestion.
> > Grace and Peace,
> > Jovian
> Check their rates, but a community college adult ed. shop class is often a
> cheap way to get access to some major power tools in a large space. Often
> you learn or show you know the basics and after that can just work on your
> own projects.