Re: [MedievalSawdust] wood to use
- On the ding issue, it may take a lot of dings, but to me, that adds to
charm, and doesn't impact the use of the piece at all. I for one am
rather fond of ponderosa pine, and would LOVE a slat bed made out of
Also, yellow pines like the ponderosa SUCK up linseed. Once dry, it
seriously reduces dinging tendencies.
On Mon, Dec 1, 2008 at 12:28 PM, AlbionWood <albionwood@...> wrote:
> +1 to what John LaTorre said.
> You can get away with pine for a bed, but I would never recommend it for an
> X-frame chair. (And frankly I wouldn't make a bed out of it either, because
> it will get dinged up too quickly. But my time frame seems to be different
> from most folks'... I expect a piece of furniture to last a lifetime, at
> least.) The joinery on an X-frame requires a lot of strength in the wood,
> more than pine can offer, IMO.
> Bobby Bourgoin (Robert du Bourg) wrote:
> I am thinking of a folding or break-down chair/thrown and a break-down bed.
> Chair: probably an X-chair with back attached using a sort of tusk tenon.
> Bed: Viking style using tusk tenon joints.
- I made a pair of Glastonbury style chairs out of 1x pine. I chose this material for the cost effectiveness and for the reason that it was a new design attempt for me. They have been going strong for a few years now and have been to many demos and festivals over the years. As these were a prototype, I am waiting for them to become unusable before rebuilding out of a more expensive hardwood. It appears that I may have some more time to wait.Lagerstein----- Original Message -----From: Rapier3971@...Sent: Tuesday, December 02, 2008 1:05 PMSubject: Re: [MedievalSawdust] Re: wood to use
I also made one of my first folding "X" Dantesca chairs out of pine with leather seat and back and that was over five years ago. It has been all over the east coast to multiple events and is still in very good shape and it was inexpensive to make compared to some of my walnut or oak examples.
From: Eric <ewdysar@yahoo. com>
To: medievalsawdust@ yahoogroups. com
Sent: Tue, 2 Dec 2008 11:58 am
Subject: [MedievalSawdust] Re: wood to useWhen I set out to make a couple of the German Faeldstools (x-chairs)
from the Oakley plans, I made the first 2 out of clear 1x pine. I
followed those up with some made of oak. The pine versions use 1/4"
steel rod for the hinges, I didn't want to weaken the boards with
bigger holes and 1/4" dowel didn't seem strong enough. All of them
are still in great condition, the pine ones are holding up just fine.
--- In medievalsawdust@ yahoogroups. com, Rebekah d'Avignon
<rebekahdavignon@ ...> wrote:
> My Lord......I beg to differ.
> I make "X" chairs and sell them at events. Now....by "X" chair I
mean that the pieces literally form an "X". Perhaps an "X" seat is
more descriptive. ..
> But no matter what wood you use, it will get dinged up as it is
pitched into the back of a minivan, SUV, or trailer or as armor,
tentpoles, and other equipment is tossed in on top of it.
> AlbionWood <albionwood@ ...> wrote:
> +1 to what John LaTorre said.
> You can get away with pine for a bed, but I would never recommend
it for an X-frame chair.