Loading ...
Sorry, an error occurred while loading the content.

12120Re: Curved

Expand Messages
  • Jeff
    Feb 14, 2010
    • 0 Attachment
      I'll echo the call to use another board. It's not worth the trouble it may cause. Spend the $3.98 for a new straight one & cut this one up into short pieces for other parts.

      --- In medievalsawdust@yahoogroups.com, Electric Wolf <elecwolf@...> wrote:
      >
      > Thank you both. Fortunately it's going to be the table part of a folding
      > workbench I found online so it should serve that purpose well enough and if
      > all else fails it wasn't all that expensive and the store is only a few
      > blocks away.
      > This will at least let me put away the plastic folding table I have been
      > using. :)
      >
      > On Sun, Feb 14, 2010 at 12:39 PM, leaking pen <itsatrap@...> wrote:
      >
      > >
      > >
      > > what he said. A dogleg in a stud is a dogleg in a stud. You could nail
      > > that sucker straight as part of a house, and it will slowly bend the whole
      > > wall to match. (Been there, done that, man that was a pain to tear down and
      > > rebuild)
      > >
      > >
      > >
      > > On Sun, Feb 14, 2010 at 11:11 AM, Dan Baker <LordRhys@...> wrote:
      > >
      > >>
      > >>
      > >> Sorry friend, but it's just going to bend again, best to go down and buy a
      > >> straight one.
      > >>
      > >> -Rhys
      > >>
      > >>
      > >> On Sun, Feb 14, 2010 at 12:48 PM, Electric Wolf <elecwolf@...>wrote:
      > >>
      > >>>
      > >>>
      > >>> How long should I clamp down a board to get it to straighten out?
      > >>> It's 8'x2"x4". Not sure what kind of wood, just says 'common stud'.
      > >>>
      > >>> David "Wolf" Mc.
      > >>>
      > >>>
      > >>
      > >>
      > >> --
      > >> ()xxxx[]::::::::::::::::::>
      > >>
      > >
      > >
      > >
      > >
      > --
      > David "Wolf" Mc.
      > Nullum beneficium inpune stat.
      >
    • Show all 6 messages in this topic