Loading ...
Sorry, an error occurred while loading the content.

Topics List

Test Post - to see if my name or openID uuid shows up

(1)
Investigating how to get Yahoo groups to use my name instead of the uuid from openID from Google services. Someone can delete this anytime after 1 May 2017.
Marc Jackson
1
post
Apr 27

Connecting rod clearence locus

(1)
What is the typical locus around the big and small ends of 1 litre 4 cylinder rods ? Like KX 14 YZF R1 etc. Needed to verify geometry and crankcase clearance,
db28272dee9532fefd06075f3e7e35cf
1
post
Apr 27

TCV8 Project

(34)
Alta motorcycle have a really cool electric MX bike with 30 kW motor that sits in the best location to minimise polar moments. In San Francisco the fastest
prosenberg5
34
posts
Apr 24

Fuel Injector Placement

(6)
I would use injectors that atomiser the fuel best and spray it at the hottest part of the intake port likely closest surface to the exhaust. That way you
Rick Denoon
6
posts
Apr 24

EV battery tech

(4)
correction: the Zero bikes are lighter than I said, more like 260 lbs and 290 lbs, and their purchase prices for the FX line are equal more or less to gas
Charles Finney
4
posts
Apr 9

So I bought a 3D Printer,,,

(25)
I always thought rotation axis is rear contact patch? (Unless the bike is sliding?) On Wed, Mar 29, 2017 at 9:12 AM, Otto Nikolaus
Rick Denoon
25
posts
Mar 29

Comments on Dual crankshaft arrangement

(7)
Has anyone integrated engine simulation into the cad system, so if say a bearing size parameter is changed. Then the simulation suite is run automatically as
Marc Jackson
7
posts
Mar 12

Honda alternator/crank taper

(16)
Good to think the nasty days are over, when access for servicing was terrible. Now, at the touch of an electronic button, all is well. Am I dreaming? Jordan
Rick Denoon
16
posts
Mar 8

Fwd: Re: Honda alternator/crank taper - repost

(8)
... Dial indicators are for "zero reference" only in my workshop. Cheers IAN -- DRYSDALE MOTORCYCLE Co. See www.drysdale-v8.com.au for: V8
Rick Denoon
8
posts
Mar 7

Balancing a crank : "K" factor

(3)
Ian, ... -- Yes ... -- I was afraid mixing my ideas.   ... -- Yes of course, brain attention/concentration mistake from myself. ... -- Thanks Ian.
TTroncs
3
posts
Mar 5

Worn gears

(5)
Yes! On Sun, Jan 29, 2017 at 8:34 PM, Greg Summerton gregss@...
TTroncs
5
posts
Jan 30

Ducati "jet" exhaust

(14)
I suppose if they dont pattern it then someone else will. On 27/01/2017, at 11:34 AM, Ian Drysdale ian@... [mc-
TTroncs
14
posts
Jan 27

Harley-Davidson drag racing engine

(7)
I cant see the point of turning a plug off. It negates the reason for putting it there in the first place. Put some knock sensors in it and log some data. All
Marshland Engineering
7
posts
Jan 19

A way to find turbulences on the intake manifold ?

(16)
Thanks all, Now to build the beast>>> On Wed, Jan 18, 2017 at 2:09 AM, mike lowe mikelowe@... ... Thanks all,   Now to build the beast>>> On Wed,
TTroncs
16
posts
Jan 18

two stroke cranks and the making of

(4)
Finding a jig grinder and competent operator was when it went wrong. There were none. On Thu, Dec 15, 2016 at 4:35 PM, Ian Drysdale ian@...
jamie porter
4
posts
Dec 15, 2016
View First Topic Go to View Last Topic