Loading ...
Sorry, an error occurred while loading the content.
 

Re: [mach1mach2cnc] Version 7 release date? Lathe Docs?

Expand Messages
  • Steve Blackmore
    ... There is also some information in the files section of the group ;) Look for Mach2 turn threading, and Mach2_turning.pdf. -- Steve Blackmore
    Message 1 of 5 , Oct 1, 2004
      On Thu, 30 Sep 2004 18:43:35 -0300, you wrote:


      > There are no Doc's yet on Turn, they will come duting version 7.0's
      > development. Basically, you have G32 and G76 at this point for threading and
      > all other codes are identical to Mill. Search the archive for potss with G76
      > and G32 in them for details on those commands, heres a small threading
      > program to show it in use..
      >
      > G0z0x0
      > g76Z-16X2H40C1P2.56I0
      > G0Z0X0

      There is also some information in the files section of the group ;)

      Look for Mach2 turn threading, and Mach2_turning.pdf.

      --
      Steve Blackmore
    • lcdpublishing
      Hi Steve, I already grabbed those and it s a good start! Chris ... 7.0 s ... threading and ... potss with G76 ... threading
      Message 2 of 5 , Oct 1, 2004
        Hi Steve,

        I already grabbed those and it's a good start!

        Chris



        --- In mach1mach2cnc@yahoogroups.com, Steve Blackmore <steve@p...>
        wrote:
        > On Thu, 30 Sep 2004 18:43:35 -0300, you wrote:
        >
        >
        > > There are no Doc's yet on Turn, they will come duting version
        7.0's
        > > development. Basically, you have G32 and G76 at this point for
        threading and
        > > all other codes are identical to Mill. Search the archive for
        potss with G76
        > > and G32 in them for details on those commands, heres a small
        threading
        > > program to show it in use..
        > >
        > > G0z0x0
        > > g76Z-16X2H40C1P2.56I0
        > > G0Z0X0
        >
        > There is also some information in the files section of the group ;)
        >
        > Look for Mach2 turn threading, and Mach2_turning.pdf.
        >
        > --
        > Steve Blackmore
      • Andy Wander
        Andy Wander Vice President, Engineering Verrex Corporation (908) 232-7000 (908) 232-9065 (610) 847-5947 Home Office (Wednesdays) (610) 389-4819 Cell ... From:
        Message 3 of 5 , Oct 1, 2004
          Andy Wander
          Vice President, Engineering

          Verrex Corporation
          (908) 232-7000
          (908) 232-9065
          (610) 847-5947 Home Office (Wednesdays)
          (610) 389-4819 Cell

          -----Original Message-----
          From: Steve Blackmore [mailto:steve@...]
          Sent: Friday, October 01, 2004 3:14 AM
          To: mach1mach2cnc@yahoogroups.com
          Subject: Re: [mach1mach2cnc] Version 7 release date? Lathe Docs?


          On Thu, 30 Sep 2004 18:43:35 -0300, you wrote:


          > There are no Doc's yet on Turn, they will come duting version 7.0's
          > development. Basically, you have G32 and G76 at this point for threading
          and
          > all other codes are identical to Mill. Search the archive for potss with
          G76
          > and G32 in them for details on those commands, heres a small threading
          > program to show it in use..
          >
          > G0z0x0
          > g76Z-16X2H40C1P2.56I0
          > G0Z0X0

          There is also some information in the files section of the group ;)

          Look for Mach2 turn threading, and Mach2_turning.pdf.

          --
          Steve Blackmore





          Yahoo! Groups Links
        Your message has been successfully submitted and would be delivered to recipients shortly.