Loading ...
Sorry, an error occurred while loading the content.

Re: [mach1mach2cnc] Re: Fwd: Building The World's Smallest v12 Engine

Expand Messages
  • chuck
    it would appear you are correct Terry here s a blown V8 that is machined in a home shop that is a true running IC engine. not mine just a related video that s
    Message 1 of 7 , Jul 1, 2013
    • 0 Attachment
      it would appear you are correct Terry here's a blown V8 that is machined in a home shop that is a true running IC engine.
      not mine just a related video that's the real thing.

      http://www.break.com/video/ugc/worlds-smallest-v8-engine-410559

      Chuck

      ----- Original Message -----
      From: Terry Parker
      To: mach1mach2cnc@yahoogroups.com
      Sent: Monday, July 01, 2013 5:09 PM
      Subject: [mach1mach2cnc] Re: Fwd: Building The World's Smallest v12 Engine




      What you see is an air pump not a real engine. It is built as a 2 cycle with valves. Look at the cam gear ratios, they are 1:1 not 2:1 as it should be. The unsupported crank would not last long under running cylinder pressures.

      BUT it is a great example of machining small parts.

      Just a thought(;-) TP

      --- In mach1mach2cnc@yahoogroups.com, Andrey Lipavsky <andrey@...> wrote:
      >
      >
      >
      >
      > This is incredible. And it actually runs. The visible portion of the turning looks CNC-smooth, so it should be within scope for this group.
      >
      > http://www.break.com/index/building-the-worlds-smallest-v12-engine-2475619
      >
      >
      > Sincerely,
      > Andrey Lipavsky
      > www.EssexJewelers.com
      > 347-388-7208
      >





      [Non-text portions of this message have been removed]
    • Dave
      Oh terry you big spoil sport
      Message 2 of 7 , Jul 1, 2013
      • 0 Attachment
        Oh terry you big spoil sport

        Terry Parker <vmax549@...> wrote:

        >
        >What you see is an air pump not a real engine. It is built as a 2 cycle with valves. Look at the cam gear ratios, they are 1:1 not 2:1 as it should be. The unsupported crank would not last long under running cylinder pressures.
        >
        >BUT it is a great example of machining small parts.
        >
        >Just a thought(;-) TP
        >
        >
        >--- In mach1mach2cnc@yahoogroups.com, Andrey Lipavsky <andrey@...> wrote:
        >>
        >>
        >>
        >>
        >> This is incredible. And it actually runs. The visible portion of the turning looks CNC-smooth, so it should be within scope for this group.
        >>
        >> http://www.break.com/index/building-the-worlds-smallest-v12-engine-2475619
        >>
        >>
        >> Sincerely,
        >> Andrey Lipavsky
        >> www.EssexJewelers.com
        >> 347-388-7208
        >>
        >
        >
        >
        >
        >------------------------------------
        >
        >www.machsupport.com - Web site AccessYahoo! Groups Links
        >
        >
        >
      • Lynn Kasdorf
        If you folks ever get a chance to attend the Cabin Fever Expo in York, PA, there are always several functioning teeny engines that are just mindblowing. There
        Message 3 of 7 , Jul 1, 2013
        • 0 Attachment
          If you folks ever get a chance to attend the Cabin Fever Expo in York,
          PA, there are always several functioning teeny engines that are just
          mindblowing.

          There was an older fellow who had made several miniature radial engines-
          with pistons about 1/4" diameter or smaller- complete with rings! Amazing.

          Still, this V12 represents some excellent miniature machining.

          Lynn Kasdorf
        • Steve Blackmore
          ... The crank is clearly being hand turned at 1min 31 seconds in.. Steve Blackmore --
          Message 4 of 7 , Jul 1, 2013
          • 0 Attachment
            On Mon, 01 Jul 2013 13:41:54 -0400, you wrote:

            >
            >
            >
            >This is incredible. And it actually runs. The visible portion of the turning looks CNC-smooth, so it should be within scope for this group.

            The crank is clearly being hand turned at 1min 31 seconds in..

            Steve Blackmore
            --
          Your message has been successfully submitted and would be delivered to recipients shortly.