Loading ...
Sorry, an error occurred while loading the content.

Re: [mach1mach2cnc] Mach 4 and Galil plugin

Expand Messages
  • Brian Barker
    I need to get at video camera but I think we can do that.. I will tell Todd we need one :) . Thanks Brian
    Message 1 of 21 , Mar 22, 2013
    • 0 Attachment
      I need to get at video camera but I think we can do that.. I will tell
      Todd we need one :) .

      Thanks
      Brian

      On 3/22/2013 2:37 PM, johntech wrote:
      > Brian
      >
      > Would there a chance that you could video the talk and put it up for viewing or downloading
      > for those of us who can't make it to the show?
      >
      > Thank you!
      >
      > John Frankforther
      >
      >
      >
      > ----- Original Message -----
      > From: Brian Barker
      > To: mach1mach2cnc@yahoogroups.com
      > Sent: Friday, March 22, 2013 10:37 AM
      > Subject: Re: [mach1mach2cnc] Mach 4 and Galil plugin
      >
      >
      >
      > Hello,
      > We have the Galil plugin working in Mach4 but I think it is only for the
      > ethernet based at this time.
      >
      > You do need to have mach3 licensed to make parts but you can test
      > without getting it licensed.. So I would set it up and get it working.
      > When you are at the point you need to get a license see where we are at
      > and you may be able to get Mach4. We are making progress on Mach4 every
      > day, it is just a monster undertaking :( . We will have Mach4 at the
      > show in PA running on a machine and we will do a talk on Mach4 so you
      > can see how to set it up.. :)
      >
      > Thanks
      > Brian
      >
      > On 3/22/2013 9:38 AM, tig_140 wrote:
      > > Hi new here, retrofitting my Boss 5 Bridgeport to full CNC Servo.
      > > I was able to pick up a Galil 1850 from a member on CNC Zone. And would like to use Mach software. If I understand Galil plugin must be run on a license copy of Mach3, is this correct? If so I have no problem paying for a license, even for hobby use. But would want to upgrade to Mach 4, and don't want to pay again. How soon will Mach 4 be available for use with the Galil plugin? I've got a little time as I've stripped the machine and cleaned it. Purchased most of the hardware, and am just starting to layout the back panels, and mount parts. I'll be at Cabin Fever, looking forward to meeting other members.
      > > Ed
      > >
      > >
      >
      >
      >
      >
      > [Non-text portions of this message have been removed]
      >
      >
      >
      > ------------------------------------
      >
      > www.machsupport.com - Web site AccessYahoo! Groups Links
      >
      >
      >
      >
    • tig_140
      Brian I m going to be there and will bring a Sony NEX-VG20 HD video camera. I ll be more then happy to set it up to video. And will have my laptop so I can
      Message 2 of 21 , Mar 22, 2013
      • 0 Attachment
        Brian
        I'm going to be there and will bring a Sony NEX-VG20 HD video camera.
        I'll be more then happy to set it up to video. And will have my laptop so I can copy it to a stick for you. Are you staying over Friday night? If so would you want to meet with members for dinner. Hosses is close by and we may be able to get their area off to the side to our selves, if we can get enough people interested. Only problem is they don't serve beer or drinks. There are other places around, if you are interested.
        Ed Kilburn

        --- In mach1mach2cnc@yahoogroups.com, Brian Barker <brianb@...> wrote:
        >
        > I need to get at video camera but I think we can do that.. I will tell
        > Todd we need one :) .
        >
        > Thanks
        > Brian
        >
        > On 3/22/2013 2:37 PM, johntech wrote:
        > > Brian
        > >
        > > Would there a chance that you could video the talk and put it up for viewing or downloading
        > > for those of us who can't make it to the show?
        > >
        > > Thank you!
        > >
        > > John Frankforther
        > >
        > >
        > >
        > > ----- Original Message -----
        > > From: Brian Barker
        > > To: mach1mach2cnc@yahoogroups.com
        > > Sent: Friday, March 22, 2013 10:37 AM
        > > Subject: Re: [mach1mach2cnc] Mach 4 and Galil plugin
        > >
        > >
        > >
        > > Hello,
        > > We have the Galil plugin working in Mach4 but I think it is only for the
        > > ethernet based at this time.
        > >
        > > You do need to have mach3 licensed to make parts but you can test
        > > without getting it licensed.. So I would set it up and get it working.
        > > When you are at the point you need to get a license see where we are at
        > > and you may be able to get Mach4. We are making progress on Mach4 every
        > > day, it is just a monster undertaking :( . We will have Mach4 at the
        > > show in PA running on a machine and we will do a talk on Mach4 so you
        > > can see how to set it up.. :)
        > >
        > > Thanks
        > > Brian
        > >
        > > On 3/22/2013 9:38 AM, tig_140 wrote:
        > > > Hi new here, retrofitting my Boss 5 Bridgeport to full CNC Servo.
        > > > I was able to pick up a Galil 1850 from a member on CNC Zone. And would like to use Mach software. If I understand Galil plugin must be run on a license copy of Mach3, is this correct? If so I have no problem paying for a license, even for hobby use. But would want to upgrade to Mach 4, and don't want to pay again. How soon will Mach 4 be available for use with the Galil plugin? I've got a little time as I've stripped the machine and cleaned it. Purchased most of the hardware, and am just starting to layout the back panels, and mount parts. I'll be at Cabin Fever, looking forward to meeting other members.
        > > > Ed
        > > >
        > > >
        > >
        > >
        > >
        > >
        > > [Non-text portions of this message have been removed]
        > >
        > >
        > >
        > > ------------------------------------
        > >
        > > www.machsupport.com - Web site AccessYahoo! Groups Links
        > >
        > >
        > >
        > >
        >
      • tig_140
        Thanks Brian, I d like to have the machine running by the show, but I know I m dreaming. Is it any use to read up on how write screens and other code for Mach
        Message 3 of 21 , Mar 22, 2013
        • 0 Attachment
          Thanks Brian,
          I'd like to have the machine running by the show, but I know I'm dreaming. Is it any use to read up on how write screens and other code for Mach 3 or is Mach 4 total different. It my age I don't want to learn something the have to spend time to unlearn and start over.
          Ed

          --- In mach1mach2cnc@yahoogroups.com, Brian Barker <brianb@...> wrote:
          >
          > Hello,
          > We have the Galil plugin working in Mach4 but I think it is only for the
          > ethernet based at this time.
          >
          > You do need to have mach3 licensed to make parts but you can test
          > without getting it licensed.. So I would set it up and get it working.
          > When you are at the point you need to get a license see where we are at
          > and you may be able to get Mach4. We are making progress on Mach4 every
          > day, it is just a monster undertaking :( . We will have Mach4 at the
          > show in PA running on a machine and we will do a talk on Mach4 so you
          > can see how to set it up.. :)
          >
          >
          > Thanks
          > Brian
          >
          >
          > On 3/22/2013 9:38 AM, tig_140 wrote:
          > > Hi new here, retrofitting my Boss 5 Bridgeport to full CNC Servo.
          > > I was able to pick up a Galil 1850 from a member on CNC Zone. And would like to use Mach software. If I understand Galil plugin must be run on a license copy of Mach3, is this correct? If so I have no problem paying for a license, even for hobby use. But would want to upgrade to Mach 4, and don't want to pay again. How soon will Mach 4 be available for use with the Galil plugin? I've got a little time as I've stripped the machine and cleaned it. Purchased most of the hardware, and am just starting to layout the back panels, and mount parts. I'll be at Cabin Fever, looking forward to meeting other members.
          > > Ed
          > >
          > >
          >
        • cnc sales
          +1 on the video. Its too far and expensive from Barcelona, although one day I will be there. Maybe next year. Once You have the video, you can upload it as a
          Message 4 of 21 , Mar 23, 2013
          • 0 Attachment
            +1 on the video.
            Its too far and expensive from Barcelona, although one day I will be there.
            Maybe next year.

            Once You have the video, you can upload it as a torrent, or put it on
            youtube which is readily downloaded.


            > Brian
            > I'm going to be there and will bring a Sony NEX-VG20 HD video camera.
            > I'll be more then happy to set it up to video. And will have my laptop
            > so I can copy it to a stick for you. Are you staying over Friday
            > night? If so would you want to meet with members for dinner. Hosses is
            > close by and we may be able to get their area off to the side to our
            > selves, if we can get enough people interested. Only problem is they
            > don't serve beer or drinks. There are other places around, if you are
            > interested.
            > Ed Kilburn
            >
            >
            >


            --
            -hanermo



            [Non-text portions of this message have been removed]
          • Brian Barker
            I am going to have my family with me this trip.. So we can do a night but I am not sure what is going to happen Friday night.. I should be there. But with my
            Message 5 of 21 , Mar 24, 2013
            • 0 Attachment
              I am going to have my family with me this trip.. So we can do a night
              but I am not sure what is going to happen Friday night.. I should be
              there. But with my two kids with me I have no idea what is going to
              happen LOL... Let me check with the big boss.. I think it sounds like a
              good idea..

              On 3/22/2013 9:52 PM, tig_140 wrote:
              >
              > Brian
              > I'm going to be there and will bring a Sony NEX-VG20 HD video camera.
              > I'll be more then happy to set it up to video. And will have my laptop so I can copy it to a stick for you. Are you staying over Friday night? If so would you want to meet with members for dinner. Hosses is close by and we may be able to get their area off to the side to our selves, if we can get enough people interested. Only problem is they don't serve beer or drinks. There are other places around, if you are interested.
              > Ed Kilburn
              >
              >
              >
            • Brian Barker
              Yes the tools are all new for making the screens, but if we did good you should fine it simpler to make a screen.. I think you will all like it (or that is
              Message 6 of 21 , Mar 24, 2013
              • 0 Attachment
                Yes the tools are all new for making the screens, but if we did good you
                should fine it simpler to make a screen..

                I think you will all like it (or that is what everyone that has seen it
                says)

                Thanks
                Brian

                On 3/22/2013 10:41 PM, tig_140 wrote:
                > Thanks Brian,
                > I'd like to have the machine running by the show, but I know I'm dreaming. Is it any use to read up on how write screens and other code for Mach 3 or is Mach 4 total different. It my age I don't want to learn something the have to spend time to unlearn and start over.
                > Ed
                >
                > --- In mach1mach2cnc@yahoogroups.com, Brian Barker<brianb@...> wrote:
                >> Hello,
                >> We have the Galil plugin working in Mach4 but I think it is only for the
                >> ethernet based at this time.
                >>
                >> You do need to have mach3 licensed to make parts but you can test
                >> without getting it licensed.. So I would set it up and get it working.
                >> When you are at the point you need to get a license see where we are at
                >> and you may be able to get Mach4. We are making progress on Mach4 every
                >> day, it is just a monster undertaking :( . We will have Mach4 at the
                >> show in PA running on a machine and we will do a talk on Mach4 so you
                >> can see how to set it up.. :)
                >>
                >>
                >> Thanks
                >> Brian
                >>
                >>
                >> On 3/22/2013 9:38 AM, tig_140 wrote:
                >>> Hi new here, retrofitting my Boss 5 Bridgeport to full CNC Servo.
                >>> I was able to pick up a Galil 1850 from a member on CNC Zone. And would like to use Mach software. If I understand Galil plugin must be run on a license copy of Mach3, is this correct? If so I have no problem paying for a license, even for hobby use. But would want to upgrade to Mach 4, and don't want to pay again. How soon will Mach 4 be available for use with the Galil plugin? I've got a little time as I've stripped the machine and cleaned it. Purchased most of the hardware, and am just starting to layout the back panels, and mount parts. I'll be at Cabin Fever, looking forward to meeting other members.
                >>> Ed
                >>>
                >>>
                >
                >
                >
                > ------------------------------------
                >
                > www.machsupport.com - Web site AccessYahoo! Groups Links
                >
                >
                >
                >
              • Chris CNC
                Why is this cabin fever never comes out to California?. The most user are here anyway...... It should be different part of the country each year!. Chris ...
                Message 7 of 21 , Mar 24, 2013
                • 0 Attachment
                  Why is this cabin fever never comes out to California?. The most user are here anyway...... It should be different part of the country each year!.


                  Chris
                  ----- Original Message -----
                  From: Brian Barker<mailto:brianb@...>
                  To: mach1mach2cnc@yahoogroups.com<mailto:mach1mach2cnc@yahoogroups.com>
                  Sent: Sunday, March 24, 2013 9:18 AM
                  Subject: Re: [mach1mach2cnc] Re: Mach 4 and Galil plugin



                  I am going to have my family with me this trip.. So we can do a night
                  but I am not sure what is going to happen Friday night.. I should be
                  there. But with my two kids with me I have no idea what is going to
                  happen LOL... Let me check with the big boss.. I think it sounds like a
                  good idea..

                  On 3/22/2013 9:52 PM, tig_140 wrote:
                  >
                  > Brian
                  > I'm going to be there and will bring a Sony NEX-VG20 HD video camera.
                  > I'll be more then happy to set it up to video. And will have my laptop so I can copy it to a stick for you. Are you staying over Friday night? If so would you want to meet with members for dinner. Hosses is close by and we may be able to get their area off to the side to our selves, if we can get enough people interested. Only problem is they don't serve beer or drinks. There are other places around, if you are interested.
                  > Ed Kilburn
                  >
                  >
                  >




                  [Non-text portions of this message have been removed]
                • bennyattwell
                  i hope your going to let klauss make a great screen designer too. i always use his machscreen as its so simple to get what you want in 3.
                  Message 8 of 21 , Mar 24, 2013
                  • 0 Attachment
                    i hope your going to let klauss make a great screen designer too.
                    i always use his machscreen as its so simple to get what you want in 3.

                    --- In mach1mach2cnc@yahoogroups.com, Brian Barker <brianb@...> wrote:
                    >
                    > Yes the tools are all new for making the screens, but if we did good you
                    > should fine it simpler to make a screen..
                    >
                    > I think you will all like it (or that is what everyone that has seen it
                    > says)
                    >
                    > Thanks
                    > Brian
                    >
                    > On 3/22/2013 10:41 PM, tig_140 wrote:
                    > > Thanks Brian,
                    > > I'd like to have the machine running by the show, but I know I'm dreaming. Is it any use to read up on how write screens and other code for Mach 3 or is Mach 4 total different. It my age I don't want to learn something the have to spend time to unlearn and start over.
                    > > Ed
                    > >
                    > > --- In mach1mach2cnc@yahoogroups.com, Brian Barker<brianb@> wrote:
                    > >> Hello,
                    > >> We have the Galil plugin working in Mach4 but I think it is only for the
                    > >> ethernet based at this time.
                    > >>
                    > >> You do need to have mach3 licensed to make parts but you can test
                    > >> without getting it licensed.. So I would set it up and get it working.
                    > >> When you are at the point you need to get a license see where we are at
                    > >> and you may be able to get Mach4. We are making progress on Mach4 every
                    > >> day, it is just a monster undertaking :( . We will have Mach4 at the
                    > >> show in PA running on a machine and we will do a talk on Mach4 so you
                    > >> can see how to set it up.. :)
                    > >>
                    > >>
                    > >> Thanks
                    > >> Brian
                    > >>
                    > >>
                    > >> On 3/22/2013 9:38 AM, tig_140 wrote:
                    > >>> Hi new here, retrofitting my Boss 5 Bridgeport to full CNC Servo.
                    > >>> I was able to pick up a Galil 1850 from a member on CNC Zone. And would like to use Mach software. If I understand Galil plugin must be run on a license copy of Mach3, is this correct? If so I have no problem paying for a license, even for hobby use. But would want to upgrade to Mach 4, and don't want to pay again. How soon will Mach 4 be available for use with the Galil plugin? I've got a little time as I've stripped the machine and cleaned it. Purchased most of the hardware, and am just starting to layout the back panels, and mount parts. I'll be at Cabin Fever, looking forward to meeting other members.
                    > >>> Ed
                    > >>>
                    > >>>
                    > >
                    > >
                    > >
                    > > ------------------------------------
                    > >
                    > > www.machsupport.com - Web site AccessYahoo! Groups Links
                    > >
                    > >
                    > >
                    > >
                    >
                  • Brian Barker
                    He is welcome to make one but for Mach4 we added the screen designer into Mach4 so you could make changes on the fly. The decision to do this was simple to
                    Message 9 of 21 , Mar 24, 2013
                    • 0 Attachment
                      He is welcome to make one but for Mach4 we added the screen designer
                      into Mach4 so you could make changes on the fly. The decision to do this
                      was simple to make the user experience better. But I can't see any
                      reason why he couldn't make a screen designer if he wanted..


                      On 3/24/2013 12:57 PM, bennyattwell wrote:
                      > i hope your going to let klauss make a great screen designer too.
                      > i always use his machscreen as its so simple to get what you want in 3.
                      >
                      >
                    • Brian Barker
                      Hello Chris, After Mach4 is out for a little bit I will be doing some shows in other places.. California is a stop that I think I will need to make. More on
                      Message 10 of 21 , Mar 24, 2013
                      • 0 Attachment
                        Hello Chris,
                        After Mach4 is out for a little bit I will be doing some shows in other
                        places.. California is a stop that I think I will need to make. More
                        on that as we get closer.. But know that we are thinking we need to get
                        out to do some face to face training :) .

                        Thanks
                        Brian

                        On 3/24/2013 12:27 PM, Chris CNC wrote:
                        > Why is this cabin fever never comes out to California?. The most user are here anyway...... It should be different part of the country each year!.
                        >
                        >
                        > Chris
                        > ----- Original Message -----
                        >
                      • Chris CNC
                        Brian: I look forward to that face to face training is a great thing to do with starting with Mach 4. I appreciate your support very much Regards; Chris ...
                        Message 11 of 21 , Mar 24, 2013
                        • 0 Attachment
                          Brian:

                          I look forward to that face to face training is a great thing to do with starting with Mach 4. I appreciate your support very much

                          Regards;
                          Chris


                          ----- Original Message -----
                          From: Brian Barker<mailto:brianb@...>
                          To: mach1mach2cnc@yahoogroups.com<mailto:mach1mach2cnc@yahoogroups.com>
                          Sent: Sunday, March 24, 2013 2:04 PM
                          Subject: Re: [mach1mach2cnc] Re: Mach 4 and Galil plugin



                          Hello Chris,
                          After Mach4 is out for a little bit I will be doing some shows in other
                          places.. California is a stop that I think I will need to make. More
                          on that as we get closer.. But know that we are thinking we need to get
                          out to do some face to face training :) .

                          Thanks
                          Brian

                          On 3/24/2013 12:27 PM, Chris CNC wrote:
                          > Why is this cabin fever never comes out to California?. The most user are here anyway...... It should be different part of the country each year!.
                          >
                          >
                          > Chris
                          > ----- Original Message -----
                          >





                          [Non-text portions of this message have been removed]
                        • marvfrankel
                          Brian, A training session here in California would be awesome, and keep us from feeling like step-children, even if it s held in Northern California. It would
                          Message 12 of 21 , Mar 25, 2013
                          • 0 Attachment
                            Brian,
                            A training session here in California would be awesome, and keep us from feeling like step-children, even if it's held in Northern California. It would be much easier to drive 400 miles, than to fly 3,000 miles and then drive to the boondocks. Please keep us posted on your future plans.

                            Thanks,
                            Marv Frankel
                            Los Angeles

                            --- In mach1mach2cnc@yahoogroups.com, Brian Barker <brianb@...> wrote:
                            >
                            > Hello Chris,
                            > After Mach4 is out for a little bit I will be doing some shows in other
                            > places.. California is a stop that I think I will need to make. More
                            > on that as we get closer.. But know that we are thinking we need to get
                            > out to do some face to face training :) .
                            >
                            > Thanks
                            > Brian
                            >
                            > On 3/24/2013 12:27 PM, Chris CNC wrote:
                            > > Why is this cabin fever never comes out to California?. The most user are here anyway...... It should be different part of the country each year!.
                            > >
                            > >
                            > > Chris
                            > > ----- Original Message -----
                            > >
                            >
                          • Dave Rothermel
                            Come to the boondocks you might not want to leave !! ... [Non-text portions of this message have been removed]
                            Message 13 of 21 , Mar 25, 2013
                            • 0 Attachment
                              Come to the boondocks you might not want to leave !!


                              On 3/25/2013 11:18 AM, Dave wrote:
                              >
                              > >>It would be much easier to drive 400 miles, than to fly 3,000 miles
                              > and then drive to the boondocks
                              >
                              > Huh? You west coasters need to get out more.. ;-)
                              >
                              > L.A. it is not, but York, PA is hardly the boondocks! 1 hour drive
                              > time from Baltimore. 2 hours from Philly.
                              >
                              > >>Why is this cabin fever never comes out to California?.
                              >
                              > Wouldn't work. They would have to rename it "Condo, Flat, Mountain
                              > Retreat, or Mountain Escape" Fever.
                              >
                              > Dave
                              >
                              > On 3/25/2013 7:12 AM, marvfrankel wrote:
                              > >
                              > > Brian,
                              > > A training session here in California would be awesome, and keep us
                              > > from feeling like step-children, even if it's held in Northern
                              > > California. It would be much easier to drive 400 miles, than to fly
                              > > 3,000 miles and then drive to the boondocks. Please keep us posted on
                              > > your future plans.
                              > >
                              > > Thanks,
                              > > Marv Frankel
                              > > Los Angeles
                              > >
                              > > --- In mach1mach2cnc@yahoogroups.com
                              > <mailto:mach1mach2cnc%40yahoogroups.com>
                              > > <mailto:mach1mach2cnc%40yahoogroups.com>, Brian Barker <brianb@...>
                              > wrote:
                              > > >
                              > > > Hello Chris,
                              > > > After Mach4 is out for a little bit I will be doing some shows in
                              > other
                              > > > places.. California is a stop that I think I will need to make. More
                              > > > on that as we get closer.. But know that we are thinking we need
                              > to get
                              > > > out to do some face to face training :) .
                              > > >
                              > > > Thanks
                              > > > Brian
                              > > >
                              > > > On 3/24/2013 12:27 PM, Chris CNC wrote:
                              > > > > Why is this cabin fever never comes out to California?. The most
                              > > user are here anyway...... It should be different part of the country
                              > > each year!.
                              > > > >
                              > > > >
                              > > > > Chris
                              > > > > ----- Original Message -----
                              > > > >
                              > > >
                              > >
                              > >
                              >
                              > [Non-text portions of this message have been removed]
                              >
                              >



                              [Non-text portions of this message have been removed]
                            • Dave
                              ... and then drive to the boondocks Huh? You west coasters need to get out more.. ;-) L.A. it is not, but York, PA is hardly the boondocks! 1 hour drive
                              Message 14 of 21 , Mar 25, 2013
                              • 0 Attachment
                                >>It would be much easier to drive 400 miles, than to fly 3,000 miles
                                and then drive to the boondocks

                                Huh? You west coasters need to get out more.. ;-)

                                L.A. it is not, but York, PA is hardly the boondocks! 1 hour drive
                                time from Baltimore. 2 hours from Philly.

                                >>Why is this cabin fever never comes out to California?.

                                Wouldn't work. They would have to rename it "Condo, Flat, Mountain
                                Retreat, or Mountain Escape" Fever.

                                Dave

                                On 3/25/2013 7:12 AM, marvfrankel wrote:
                                >
                                > Brian,
                                > A training session here in California would be awesome, and keep us
                                > from feeling like step-children, even if it's held in Northern
                                > California. It would be much easier to drive 400 miles, than to fly
                                > 3,000 miles and then drive to the boondocks. Please keep us posted on
                                > your future plans.
                                >
                                > Thanks,
                                > Marv Frankel
                                > Los Angeles
                                >
                                > --- In mach1mach2cnc@yahoogroups.com
                                > <mailto:mach1mach2cnc%40yahoogroups.com>, Brian Barker <brianb@...> wrote:
                                > >
                                > > Hello Chris,
                                > > After Mach4 is out for a little bit I will be doing some shows in other
                                > > places.. California is a stop that I think I will need to make. More
                                > > on that as we get closer.. But know that we are thinking we need to get
                                > > out to do some face to face training :) .
                                > >
                                > > Thanks
                                > > Brian
                                > >
                                > > On 3/24/2013 12:27 PM, Chris CNC wrote:
                                > > > Why is this cabin fever never comes out to California?. The most
                                > user are here anyway...... It should be different part of the country
                                > each year!.
                                > > >
                                > > >
                                > > > Chris
                                > > > ----- Original Message -----
                                > > >
                                > >
                                >
                                >



                                [Non-text portions of this message have been removed]
                              • Brian Barker
                                I also plan on making some video s here at the shop showing the software. So we can have an on line class of sorts..
                                Message 15 of 21 , Mar 25, 2013
                                • 0 Attachment
                                  I also plan on making some video's here at the shop showing the
                                  software. So we can have an on line class of sorts..

                                  On 3/25/2013 8:12 AM, marvfrankel wrote:
                                  > Brian,
                                  > A training session here in California would be awesome, and keep us from feeling like step-children, even if it's held in Northern California. It would be much easier to drive 400 miles, than to fly 3,000 miles and then drive to the boondocks. Please keep us posted on your future plans.
                                  >
                                  > Thanks,
                                  > Marv Frankel
                                  > Los Angeles
                                  >
                                  > --- In mach1mach2cnc@yahoogroups.com, Brian Barker<brianb@...> wrote:
                                  >> Hello Chris,
                                  >> After Mach4 is out for a little bit I will be doing some shows in other
                                  >> places.. California is a stop that I think I will need to make. More
                                  >> on that as we get closer.. But know that we are thinking we need to get
                                  >> out to do some face to face training :) .
                                  >>
                                  >> Thanks
                                  >> Brian
                                  >>
                                  >> On 3/24/2013 12:27 PM, Chris CNC wrote:
                                  >>> Why is this cabin fever never comes out to California?. The most user are here anyway...... It should be different part of the country each year!.
                                  >>>
                                  >>>
                                  >>> Chris
                                  >>> ----- Original Message -----
                                  >>>
                                  >
                                  >
                                  >
                                  > ------------------------------------
                                  >
                                  > www.machsupport.com - Web site AccessYahoo! Groups Links
                                  >
                                  >
                                  >
                                  >
                                • klmark
                                  Hey did I hear a ( So we can have an on lone class ) THAT would be GREAT .
                                  Message 16 of 21 , Mar 25, 2013
                                  • 0 Attachment
                                    Hey did I hear a ( So we can have an on lone class ) THAT would be GREAT .

                                    --- In mach1mach2cnc@yahoogroups.com, Brian Barker <brianb@...> wrote:
                                    >
                                    > I also plan on making some video's here at the shop showing the
                                    > software. So we can have an on line class of sorts..
                                    >
                                    > On 3/25/2013 8:12 AM, marvfrankel wrote:
                                    > > Brian,
                                    > > A training session here in California would be awesome, and keep us from feeling like step-children, even if it's held in Northern California. It would be much easier to drive 400 miles, than to fly 3,000 miles and then drive to the boondocks. Please keep us posted on your future plans.
                                    > >
                                    > > Thanks,
                                    > > Marv Frankel
                                    > > Los Angeles
                                    > >
                                    > > --- In mach1mach2cnc@yahoogroups.com, Brian Barker<brianb@> wrote:
                                    > >> Hello Chris,
                                    > >> After Mach4 is out for a little bit I will be doing some shows in other
                                    > >> places.. California is a stop that I think I will need to make. More
                                    > >> on that as we get closer.. But know that we are thinking we need to get
                                    > >> out to do some face to face training :) .
                                    > >>
                                    > >> Thanks
                                    > >> Brian
                                    > >>
                                    > >> On 3/24/2013 12:27 PM, Chris CNC wrote:
                                    > >>> Why is this cabin fever never comes out to California?. The most user are here anyway...... It should be different part of the country each year!.
                                    > >>>
                                    > >>>
                                    > >>> Chris
                                    > >>> ----- Original Message -----
                                    > >>>
                                    > >
                                    > >
                                    > >
                                    > > ------------------------------------
                                    > >
                                    > > www.machsupport.com - Web site AccessYahoo! Groups Links
                                    > >
                                    > >
                                    > >
                                    > >
                                    >
                                  • Garry Foster
                                    Repeat after me York is not in the boondocks. Sent from Garry s iPhone ... [Non-text portions of this message have been removed]
                                    Message 17 of 21 , Apr 3, 2013
                                    • 0 Attachment
                                      Repeat after me York is not in the boondocks.


                                      Sent from Garry's iPhone

                                      On Mar 25, 2013, at 8:12 AM, "marvfrankel" <Dcdziner@...> wrote:

                                      > Brian,
                                      > A training session here in California would be awesome, and keep us from feeling like step-children, even if it's held in Northern California. It would be much easier to drive 400 miles, than to fly 3,000 miles and then drive to the boondocks. Please keep us posted on your future plans.
                                      >
                                      > Thanks,
                                      > Marv Frankel
                                      > Los Angeles
                                      >
                                      > --- In mach1mach2cnc@yahoogroups.com, Brian Barker <brianb@...> wrote:
                                      > >
                                      > > Hello Chris,
                                      > > After Mach4 is out for a little bit I will be doing some shows in other
                                      > > places.. California is a stop that I think I will need to make. More
                                      > > on that as we get closer.. But know that we are thinking we need to get
                                      > > out to do some face to face training :) .
                                      > >
                                      > > Thanks
                                      > > Brian
                                      > >
                                      > > On 3/24/2013 12:27 PM, Chris CNC wrote:
                                      > > > Why is this cabin fever never comes out to California?. The most user are here anyway...... It should be different part of the country each year!.
                                      > > >
                                      > > >
                                      > > > Chris
                                      > > > ----- Original Message -----
                                      > > >
                                      > >
                                      >
                                      >


                                      [Non-text portions of this message have been removed]
                                    • marvfrankel
                                      Garry, I know very well where York is, since I lived in Timonium, MD, just a short ride down the freeway. Marv Frankel Los Angeles
                                      Message 18 of 21 , Apr 3, 2013
                                      • 0 Attachment
                                        Garry,
                                        I know very well where York is, since I lived in Timonium, MD,
                                        just a short ride down the freeway.

                                        Marv Frankel
                                        Los Angeles

                                        --- In mach1mach2cnc@yahoogroups.com, Garry Foster <garry.foster1@...> wrote:
                                        >
                                        > Repeat after me York is not in the boondocks.
                                        >
                                        >
                                        > Sent from Garry's iPhone
                                        >
                                        > On Mar 25, 2013, at 8:12 AM, "marvfrankel" <Dcdziner@...> wrote:
                                        >
                                        > > Brian,
                                        > > A training session here in California would be awesome, and keep us from feeling like step-children, even if it's held in Northern California. It would be much easier to drive 400 miles, than to fly 3,000 miles and then drive to the boondocks. Please keep us posted on your future plans.
                                        > >
                                        > > Thanks,
                                        > > Marv Frankel
                                        > > Los Angeles
                                        > >
                                        > > --- In mach1mach2cnc@yahoogroups.com, Brian Barker <brianb@> wrote:
                                        > > >
                                        > > > Hello Chris,
                                        > > > After Mach4 is out for a little bit I will be doing some shows in other
                                        > > > places.. California is a stop that I think I will need to make. More
                                        > > > on that as we get closer.. But know that we are thinking we need to get
                                        > > > out to do some face to face training :) .
                                        > > >
                                        > > > Thanks
                                        > > > Brian
                                        > > >
                                        > > > On 3/24/2013 12:27 PM, Chris CNC wrote:
                                        > > > > Why is this cabin fever never comes out to California?. The most user are here anyway...... It should be different part of the country each year!.
                                        > > > >
                                        > > > >
                                        > > > > Chris
                                        > > > > ----- Original Message -----
                                        > > > >
                                        > > >
                                        > >
                                        > >
                                        >
                                        >
                                        > [Non-text portions of this message have been removed]
                                        >
                                      Your message has been successfully submitted and would be delivered to recipients shortly.