Loading ...
Sorry, an error occurred while loading the content.

Re: [mach1mach2cnc] Re: Wizard Testing (;-)

Expand Messages
  • Bill Maxwell
    So does this mean you are ready to receive our $50 payments now, Brian or is this something that will occur once you announce its availability? Bill ...
    Message 1 of 43 , Feb 27, 2013
    • 0 Attachment
      So does this mean you are ready to receive our $50 payments now, Brian
      or is this something that will occur once you announce its availability?

      Bill
      On 27/02/2013 3:31 PM, Brian Barker wrote:
      > Hi Chuck,
      > Yes, The price is $50.00 for the first month and we are only going to
      > tell everyone on the forums :) . After that the price will be $75.00.
      > So if you think you would like to have it and save 25.00 now is the time
      > ;). There will be some small update fee when Rev2 comes out but we have
      > no schedule for Rev2 at this time. Also we where going to take feedback
      > from the users to get some sort of feature list for Rev2.
      >
      > Hope that helps
      > Brian
      >
      > On 2/26/2013 11:19 PM, chuck wrote:
      >> speaking of license have you decided on a price yet?
      >>
      >>
      >>
      >
      >
      > ------------------------------------
      >
      > www.machsupport.com - Web site AccessYahoo! Groups Links
      >
      >
      >
      >



      [Non-text portions of this message have been removed]
    • Andy Wander
      Thanks anyway, for the effort! Andy Wander _____ From: mach1mach2cnc@yahoogroups.com [mailto:mach1mach2cnc@yahoogroups.com] On Behalf Of Brooks Lopez Sent:
      Message 43 of 43 , Feb 27, 2013
      • 0 Attachment
        Thanks anyway, for the effort!



        Andy Wander

        _____

        From: mach1mach2cnc@yahoogroups.com [mailto:mach1mach2cnc@yahoogroups.com]
        On Behalf Of Brooks Lopez
        Sent: Wednesday, February 27, 2013 4:01 PM
        To: mach1mach2cnc@yahoogroups.com
        Subject: RE: [mach1mach2cnc] Re: Wizard Testing (;-)





        Ha, I forgot all about that - I'm too used to the ways of Win7 already!

        Carry on, I'll keep my mouth shut! J

        From: mach1mach2cnc@yahoogroups.com <mailto:mach1mach2cnc%40yahoogroups.com>
        [mailto:mach1mach2cnc@yahoogroups.com
        <mailto:mach1mach2cnc%40yahoogroups.com> ]
        On Behalf Of Andy Wander
        Sent: Wednesday, February 27, 2013 2:52 PM
        To: mach1mach2cnc@yahoogroups.com <mailto:mach1mach2cnc%40yahoogroups.com>
        Subject: RE: [mach1mach2cnc] Re: Wizard Testing (;-)

        Hi Brooks, thanks for the reply, that is not available in XP.

        I did find a way to do it, by setting up a shortcut to use the "runas"
        command with the username and telling it to save the credentials the first
        time I log in.

        C:\WINDOWS\system32\runas.exe /user:DOMAIN\USERNAME /savecred "C:\Program
        Files\Wizards\Mill\NFS_Mill.exe"

        Andy Wander

        _____

        From: mach1mach2cnc@yahoogroups.com <mailto:mach1mach2cnc%40yahoogroups.com>

        [mailto:mach1mach2cnc@yahoogroups.com
        <mailto:mach1mach2cnc%40yahoogroups.com>
        ]
        On Behalf Of Brooks Lopez
        Sent: Wednesday, February 27, 2013 3:35 PM
        To: mach1mach2cnc@yahoogroups.com <mailto:mach1mach2cnc%40yahoogroups.com>
        Subject: RE: [mach1mach2cnc] Re: Wizard Testing (;-)

        IT's been a while since I've responded to the group, and I can't even
        remember if I am doing it right or not - but.

        Andy, If you go to the properties of the shortcut you are using, one of the
        tabs (advanced?) should have a check box down near the bottom that says
        something to the effect of "always run this program as administrator".

        _brooks

        From: mach1mach2cnc@yahoogroups.com <mailto:mach1mach2cnc%40yahoogroups.com>


        [mailto:mach1mach2cnc@yahoogroups.com
        <mailto:mach1mach2cnc%40yahoogroups.com>

        ]
        On Behalf Of Andy Wander
        Sent: Wednesday, February 27, 2013 1:28 PM
        To: mach1mach2cnc@yahoogroups.com <mailto:mach1mach2cnc%40yahoogroups.com>
        Subject: RE: [mach1mach2cnc] Re: Wizard Testing (;-)

        Mine did install in C:\Program Files\Wizards\Mill

        I tried running as administrator(I ran as the domain administrator-this is
        in XP), and it gave the same error.

        So then I uninstalled, and ran the install as the domain admin, and now if I
        run the Wizards as the domain admin I don't get the error.

        If I just run it, I do get the error. In XP, is there any way to tell the
        program/PC to always run the program as administrator?

        Also, I import the license file, and it tells me I need to re-open Help,
        About to see teh changes, but when i reopen Help, About, i see it is still
        showing as unlicensed Demo.

        Andy Wander

        _____

        From: mach1mach2cnc@yahoogroups.com <mailto:mach1mach2cnc%40yahoogroups.com>


        [mailto:mach1mach2cnc@yahoogroups.com
        <mailto:mach1mach2cnc%40yahoogroups.com>


        ]
        On Behalf Of Brian Barker
        Sent: Wednesday, February 27, 2013 2:12 PM
        To: mach1mach2cnc@yahoogroups.com <mailto:mach1mach2cnc%40yahoogroups.com>
        Subject: Re: [mach1mach2cnc] Re: Wizard Testing (;-)

        Correct.. it should install in program files

        On 2/27/2013 11:17 AM, chuck wrote:
        > Andy,
        > if you did the default install I think it should be here: "C:\Program
        Files\Wizards\Mill".. at least that's where mine installed.
        > Chuck
        > ----- Original Message -----
        > From: Andy Wander
        > To: mach1mach2cnc@yahoogroups.com <mailto:mach1mach2cnc%40yahoogroups.com>


        > Sent: Wednesday, February 27, 2013 11:06 AM
        > Subject: RE: [mach1mach2cnc] Re: Wizard Testing (;-)
        >
        >
        >
        > When I run the Mill Wizard package, I get an error:
        >
        > Directory 'C:\Mach3\..\Wizards\Mill' couldn't be created (error 3: the
        > system cannot find teh path specified)
        >
        > But I am not sure what path it is looking for, due to teh ellipsis in
        > there....My Mach3 is installed in the C:\Mach3 directory.
        >
        > Andy Wander
        >
        > _____
        >
        > From: mach1mach2cnc@yahoogroups.com
        <mailto:mach1mach2cnc%40yahoogroups.com>


        [mailto:mach1mach2cnc@yahoogroups.com
        <mailto:mach1mach2cnc%40yahoogroups.com>


        ]
        > On Behalf Of Brian Barker
        > Sent: Wednesday, February 27, 2013 7:37 AM
        > To: mach1mach2cnc@yahoogroups.com <mailto:mach1mach2cnc%40yahoogroups.com>


        > Subject: Re: [mach1mach2cnc] Re: Wizard Testing (;-)
        >
        > Hello Andy,
        > Yes the posting will be on a single PC but you will be able to us ANY pc
        > to make a job file.. The thinking is that you would be able to have the
        > wizards on your machine and simply copy over the job file.
        >
        > The Lathe is not going to be part of this, and we are going to make a
        > lathe package.. The rule we made is that if you get any 2 wizard sets
        > that we will give you the rest of them.. At some point we will have
        > turn, mill and Plasma. You get any 2 and we will give you the last one..
        >
        > That sound okay?
        > Thanks
        > Brian
        >
        > On 2/27/2013 12:01 AM, Andy Wander wrote:
        > > Brian:
        > >
        > >
        > >
        > > The Mill Wizard will be restricted to a single PC?
        > >
        > >
        > >
        > > Also, will the lathe package be a part of this(eventually?)
        > >
        > >
        > >
        > > Andy Wander
        > >
        > >
        >
        > [Non-text portions of this message have been removed]
        >
        >
        >
        >
        >
        > [Non-text portions of this message have been removed]
        >
        >
        >
        > ------------------------------------
        >
        > www.machsupport.com - Web site AccessYahoo! Groups Links
        >
        >
        >
        >

        [Non-text portions of this message have been removed]

        [Non-text portions of this message have been removed]

        [Non-text portions of this message have been removed]

        [Non-text portions of this message have been removed]





        [Non-text portions of this message have been removed]
      Your message has been successfully submitted and would be delivered to recipients shortly.