Loading ...
Sorry, an error occurred while loading the content.

Re: [mach1mach2cnc] Re: Mach3plasma can not move my servo motor

Expand Messages
  • Brian Barker
    Hello Henrik, It should be off.. I will have a look at the XML I put into the installer.. Thanks Brian
    Message 1 of 3 , Jul 1, 2010
    • 0 Attachment
      Hello Henrik,
      It should be off.. I will have a look at the XML I put into the installer..

      Thanks
      Brian


      Henrik Olsson wrote:
      > Hi,
      > I just scoped the outputs, running Mach3 Plasma with the stock .xml and
      > you are correct! The X-axis step pulses ends up on pin6 no matter what
      > you set in Ports & Pins. The reason seems to be that MaxNC CL Loop is
      > enabled in Ports & Pins, turn it off, restart Mach3 and try it again.
      >
      > Brian, if you read this... Is there a specific reason for that option
      > being enabled by default in the plasma profile?
      >
      > /Henrik.
      >
      >
      > On 1 jul 2010 04:03 "Hong Son Nguyen" <nhson104@...> wrote:
      >
      >
      >>
      >>
      >> Please check Plasma profile, Maybe it have some problem. Because it
      >> can not control servo motor during Mach3Mill can.
      >>
      >> Thanks
      >>
      >> Son
      >>
      >>
      >>
      >>
      >>
      >
      > [Non-text portions of this message have been removed]
      >
      >
      >
      > ------------------------------------
      >
      > www.machsupport.com - Web site AccessYahoo! Groups Links
      >
      >
      >
      >
      >
      >
    Your message has been successfully submitted and would be delivered to recipients shortly.