Loading ...
Sorry, an error occurred while loading the content.

RE: [mach1mach2cnc] RE: Tool changer code

Expand Messages
  • Gary Corlew
    Lol that s not my shop, that s where I found the plans for the tool changer ... From: mach1mach2cnc@yahoogroups.com [mailto:mach1mach2cnc@yahoogroups.com] On
    Message 1 of 83 , May 24, 2006
    • 0 Attachment
      Lol that's not my shop, that's where I found the plans for the tool changer

      -----Original Message-----
      From: mach1mach2cnc@yahoogroups.com [mailto:mach1mach2cnc@yahoogroups.com]
      On Behalf Of Tomaž Kuhl
      Sent: Friday, October 02, 2009 7:18 AM
      To: mach1mach2cnc@yahoogroups.com
      Subject: Re: [mach1mach2cnc] RE: Tool changer code

      Nice workshop you have and a lot of interesting projects.
      We'll stay in tocuh!

      Thanks
      Tom

      2009/10/2 Gary Corlew <gcorlew@...>

      >
      >
      > If your question is for me, This is where I found it
      > http://www.cnc-projects.de/
      >
      > -----Original Message-----
      > From: mach1mach2cnc@yahoogroups.com
      <mach1mach2cnc%40yahoogroups.com>[mailto:
      > mach1mach2cnc@yahoogroups.com <mach1mach2cnc%40yahoogroups.com>] On Behalf
      > Of eloid
      > Sent: Thursday, October 01, 2009 10:40 PM
      > To: mach1mach2cnc@yahoogroups.com <mach1mach2cnc%40yahoogroups.com>
      > Subject: Re: [mach1mach2cnc] RE: Tool changer code
      >
      > what atcspindle are you using any pictures info on it?
      >
      > ________________________________
      > From: Tomaž Kuhl <kuhl.tomaz@... <kuhl.tomaz%40gmail.com>>
      > To: mach1mach2cnc@yahoogroups.com <mach1mach2cnc%40yahoogroups.com>
      > Sent: Thursday, October 1, 2009 7:02:26 PM
      > Subject: Re: [mach1mach2cnc] RE: Tool changer code
      >
      > Gary, thank you very much for sharing macro.
      > I might have a question or two, when my tool changer will be ready.
      >
      > Many thanks
      > Tom
      >
      > 2009/10/2 Gary Corlew <gcorlew@... <gcorlew%40carolina.rr.com>
      > >
      >
      > > Sorry for the delay, I have been very busy and am just catching up on
      > email
      > > this is my macro if you cannot use it copying and pasting it in a file
      > send
      > > me your email address and I will be happy to send it to you.
      > >
      > > Num_Positions = 8 'This is where you set the number of tool positions
      > > that you have
      > > tool = GetSelectedTool()
      > > While Tool > Num_Positions
      > > Tool = Question ("Invalid Tool Requested, New Tool Number?")
      > > Wend
      > > ActivateSignal(OUTPUT3)'set this to your output number for air solenoid
      > > Old_pos = GetDRO (824)'set this to the dro mach3 is using
      > > New_Pos = (Tool-1)*360/Num_positions
      > > Move_Dis = New_Pos - Old_Pos
      > > If ABS(Move_Dis) >180 Then
      > > If Move_Dis < 0 Then
      > > Move_Dis = 360 + Move_Dis
      > > Else
      > > Move_Dis = Move_Dis - 360
      > > End If
      > > End If
      > > Code "G00 G91 A" & Move_Dis
      > > While IsMoving ()
      > > Wend
      > > Call SetDRO(824 , New_Pos )'set this to the dro mach3 is using
      > > Code "G90"
      > > DeActivateSignal(OUTPUT3)'Turn off air solenoid
      > > SetCurrentTool( tool )
      > >
      > > -----Original Message-----
      > > From: mach1mach2cnc@yahoogroups.com
      <mach1mach2cnc%40yahoogroups.com>[mailto:
      > mach1mach2cnc@yahoogroups.com <mach1mach2cnc%40yahoogroups.com>]
      > > On Behalf Of Toma 3/4 Kuhl
      > > Sent: Monday, September 28, 2009 2:30 AM
      > > To: mach1mach2cnc@yahoogroups.com <mach1mach2cnc%40yahoogroups.com>
      > > Subject: Re: [mach1mach2cnc] RE: Tool changer code
      > >
      > > Hi Gary,
      > >
      > > Nice tool changer, I like it.
      > > I wonder if you please share your tool changer macro with me?? I'm not a
      > > programmer and have difficulties on how to do it.
      > >
      > > Kindest regards!
      > > Tom
      > >
      > > 2009/9/28 Gary Corlew
      <gcorlew@...<gcorlew%40carolina.rr.com>
      > >
      > >
      > > >
      > > >
      > > > This is a video of my tool changer, its just doing a bunch of tool
      > > changes
      > > > http://www.youtube.com/watch?v=Q3T8jZYUpcI
      > > >
      > > > -----Original Message-----
      > > > From: mach1mach2cnc@yahoogroups.com <mach1mach2cnc%40yahoogroups.com>
      > > <mach1mach2cnc%40yahoogroups.com>[mailto:
      > > > mach1mach2cnc@yahoogroups.com
      <mach1mach2cnc%40yahoogroups.com><mach1mach2cnc%
      > 40yahoogroups.com>]
      > > > On Behalf Of CF
      > > > Sent: Sunday, September 27, 2009 2:45 PM
      > > > To: mach1mach2cnc@yahoogroups.com
      <mach1mach2cnc%40yahoogroups.com><mach1mach2cnc%
      > 40yahoogroups.com>
      > > > Subject: RE: [mach1mach2cnc] Tool changer code
      > > >
      > > > Hello Brian:
      > > >
      > > > I try to search but unable to find it. Can you send a link perhaps?.
      > > >
      > > > Thanks;
      > > >
      > > > Chris
      > > >
      > > > _____
      > > >
      > > > From: mach1mach2cnc@yahoogroups.com <mach1mach2cnc%40yahoogroups.com>
      > > <mach1mach2cnc%40yahoogroups.com>[mailto:
      > > > mach1mach2cnc@yahoogroups.com
      <mach1mach2cnc%40yahoogroups.com><mach1mach2cnc%
      > 40yahoogroups.com>]
      > > > On Behalf Of Brian Barker
      > > > Sent: Sunday, September 27, 2009 9:36 AM
      > > > To: mach1mach2cnc@yahoogroups.com
      <mach1mach2cnc%40yahoogroups.com><mach1mach2cnc%
      > 40yahoogroups.com>
      > > > Subject: Re: [mach1mach2cnc] Tool changer code
      > > >
      > > > I will need to see if I have a copy of it.. The computer that has the
      > > > toolchange code on it is not here..
      > > > If you would like to see the video if the toolchanger that I have
      check
      > > > out Barker806 on youtube..
      > > >
      > > > Thanks
      > > > Brian
      > > >
      > > > CF wrote:
      > > > > Yes please, I am going down the same path and any help will be nice.
      > I
      > > > also
      > > > > like see what your tool changer looks like too.
      > > > >
      > > > >
      > > > >
      > > > > Thanks;
      > > > >
      > > > > Chris
      > > > >
      > > > >
      > > > >
      > > > >
      > > >
      > > > [Non-text portions of this message have been removed]
      > > >
      > > > ------------------------------------
      > > >
      > > > www.machsupport.com - Web site AccessYahoo! Groups Links
      > > >
      > > >
      > > >
      > >
      > >
      > > [Non-text portions of this message have been removed]
      > >
      > >
      > >
      > > ------------------------------------
      > >
      > > www.machsupport.com - Web site AccessYahoo! Groups Links
      > >
      > >
      > >
      > >
      > >
      > > ------------------------------------
      > >
      > > www.machsupport.com - Web site AccessYahoo! Groups Links
      > >
      > >
      > >
      > >
      >
      > [Non-text portions of this message have been removed]
      >
      > ------------------------------------
      >
      > www.machsupport.com - Web site AccessYahoo! Groups Links
      >
      > __________________________________________________________
      > Looking for the perfect gift? Give the gift of Flickr!
      >
      > http://www.flickr.com/gift/
      >
      > [Non-text portions of this message have been removed]
      >
      > ------------------------------------
      >
      > www.machsupport.com - Web site AccessYahoo! Groups Links
      >
      >
      >


      [Non-text portions of this message have been removed]



      ------------------------------------

      www.machsupport.com - Web site AccessYahoo! Groups Links
    • Tomaž Kuhl
      ups, sorry for that:)) 2006/5/25 Gary Corlew ... [Non-text portions of this message have been removed]
      Message 83 of 83 , Oct 4, 2009
      • 0 Attachment
        ups, sorry for that:))




        2006/5/25 Gary Corlew <gcorlew@...>

        > Lol that's not my shop, that's where I found the plans for the tool changer
        >
        > -----Original Message-----
        > From: mach1mach2cnc@yahoogroups.com [mailto:mach1mach2cnc@yahoogroups.com]
        > On Behalf Of Toma� Kuhl
        > Sent: Friday, October 02, 2009 7:18 AM
        > To: mach1mach2cnc@yahoogroups.com
        > Subject: Re: [mach1mach2cnc] RE: Tool changer code
        >
        > Nice workshop you have and a lot of interesting projects.
        > We'll stay in tocuh!
        >
        > Thanks
        > Tom
        >
        > 2009/10/2 Gary Corlew <gcorlew@...>
        >
        > >
        > >
        > > If your question is for me, This is where I found it
        > > http://www.cnc-projects.de/
        > >
        > > -----Original Message-----
        > > From: mach1mach2cnc@yahoogroups.com
        > <mach1mach2cnc%40yahoogroups.com>[mailto:
        > > mach1mach2cnc@yahoogroups.com <mach1mach2cnc%40yahoogroups.com>] On
        > Behalf
        > > Of eloid
        > > Sent: Thursday, October 01, 2009 10:40 PM
        > > To: mach1mach2cnc@yahoogroups.com <mach1mach2cnc%40yahoogroups.com>
        > > Subject: Re: [mach1mach2cnc] RE: Tool changer code
        > >
        > > what atcspindle are you using any pictures info on it?
        > >
        > > ________________________________
        > > From: Toma� Kuhl <kuhl.tomaz@... <kuhl.tomaz%40gmail.com>>
        > > To: mach1mach2cnc@yahoogroups.com <mach1mach2cnc%40yahoogroups.com>
        > > Sent: Thursday, October 1, 2009 7:02:26 PM
        > > Subject: Re: [mach1mach2cnc] RE: Tool changer code
        > >
        > > Gary, thank you very much for sharing macro.
        > > I might have a question or two, when my tool changer will be ready.
        > >
        > > Many thanks
        > > Tom
        > >
        > > 2009/10/2 Gary Corlew <gcorlew@... <gcorlew%
        > 40carolina.rr.com>
        > > >
        > >
        > > > Sorry for the delay, I have been very busy and am just catching up on
        > > email
        > > > this is my macro if you cannot use it copying and pasting it in a file
        > > send
        > > > me your email address and I will be happy to send it to you.
        > > >
        > > > Num_Positions = 8 'This is where you set the number of tool positions
        > > > that you have
        > > > tool = GetSelectedTool()
        > > > While Tool > Num_Positions
        > > > Tool = Question ("Invalid Tool Requested, New Tool Number?")
        > > > Wend
        > > > ActivateSignal(OUTPUT3)'set this to your output number for air solenoid
        > > > Old_pos = GetDRO (824)'set this to the dro mach3 is using
        > > > New_Pos = (Tool-1)*360/Num_positions
        > > > Move_Dis = New_Pos - Old_Pos
        > > > If ABS(Move_Dis) >180 Then
        > > > If Move_Dis < 0 Then
        > > > Move_Dis = 360 + Move_Dis
        > > > Else
        > > > Move_Dis = Move_Dis - 360
        > > > End If
        > > > End If
        > > > Code "G00 G91 A" & Move_Dis
        > > > While IsMoving ()
        > > > Wend
        > > > Call SetDRO(824 , New_Pos )'set this to the dro mach3 is using
        > > > Code "G90"
        > > > DeActivateSignal(OUTPUT3)'Turn off air solenoid
        > > > SetCurrentTool( tool )
        > > >
        > > > -----Original Message-----
        > > > From: mach1mach2cnc@yahoogroups.com
        > <mach1mach2cnc%40yahoogroups.com>[mailto:
        > > mach1mach2cnc@yahoogroups.com <mach1mach2cnc%40yahoogroups.com>]
        > > > On Behalf Of Toma 3/4 Kuhl
        > > > Sent: Monday, September 28, 2009 2:30 AM
        > > > To: mach1mach2cnc@yahoogroups.com <mach1mach2cnc%40yahoogroups.com>
        > > > Subject: Re: [mach1mach2cnc] RE: Tool changer code
        > > >
        > > > Hi Gary,
        > > >
        > > > Nice tool changer, I like it.
        > > > I wonder if you please share your tool changer macro with me?? I'm not
        > a
        > > > programmer and have difficulties on how to do it.
        > > >
        > > > Kindest regards!
        > > > Tom
        > > >
        > > > 2009/9/28 Gary Corlew
        > <gcorlew@...<gcorlew%40carolina.rr.com>
        > > >
        > > >
        > > > >
        > > > >
        > > > > This is a video of my tool changer, its just doing a bunch of tool
        > > > changes
        > > > > http://www.youtube.com/watch?v=Q3T8jZYUpcI
        > > > >
        > > > > -----Original Message-----
        > > > > From: mach1mach2cnc@yahoogroups.com <mach1mach2cnc%40yahoogroups.com
        > >
        > > > <mach1mach2cnc%40yahoogroups.com>[mailto:
        > > > > mach1mach2cnc@yahoogroups.com
        > <mach1mach2cnc%40yahoogroups.com><mach1mach2cnc%
        > > 40yahoogroups.com>]
        > > > > On Behalf Of CF
        > > > > Sent: Sunday, September 27, 2009 2:45 PM
        > > > > To: mach1mach2cnc@yahoogroups.com
        > <mach1mach2cnc%40yahoogroups.com><mach1mach2cnc%
        > > 40yahoogroups.com>
        > > > > Subject: RE: [mach1mach2cnc] Tool changer code
        > > > >
        > > > > Hello Brian:
        > > > >
        > > > > I try to search but unable to find it. Can you send a link perhaps?.
        > > > >
        > > > > Thanks;
        > > > >
        > > > > Chris
        > > > >
        > > > > _____
        > > > >
        > > > > From: mach1mach2cnc@yahoogroups.com <mach1mach2cnc%40yahoogroups.com
        > >
        > > > <mach1mach2cnc%40yahoogroups.com>[mailto:
        > > > > mach1mach2cnc@yahoogroups.com
        > <mach1mach2cnc%40yahoogroups.com><mach1mach2cnc%
        > > 40yahoogroups.com>]
        > > > > On Behalf Of Brian Barker
        > > > > Sent: Sunday, September 27, 2009 9:36 AM
        > > > > To: mach1mach2cnc@yahoogroups.com
        > <mach1mach2cnc%40yahoogroups.com><mach1mach2cnc%
        > > 40yahoogroups.com>
        > > > > Subject: Re: [mach1mach2cnc] Tool changer code
        > > > >
        > > > > I will need to see if I have a copy of it.. The computer that has the
        > > > > toolchange code on it is not here..
        > > > > If you would like to see the video if the toolchanger that I have
        > check
        > > > > out Barker806 on youtube..
        > > > >
        > > > > Thanks
        > > > > Brian
        > > > >
        > > > > CF wrote:
        > > > > > Yes please, I am going down the same path and any help will be
        > nice.
        > > I
        > > > > also
        > > > > > like see what your tool changer looks like too.
        > > > > >
        > > > > >
        > > > > >
        > > > > > Thanks;
        > > > > >
        > > > > > Chris
        > > > > >
        > > > > >
        > > > > >
        > > > > >
        > > > >
        > > > > [Non-text portions of this message have been removed]
        > > > >
        > > > > ------------------------------------
        > > > >
        > > > > www.machsupport.com - Web site AccessYahoo! Groups Links
        > > > >
        > > > >
        > > > >
        > > >
        > > >
        > > > [Non-text portions of this message have been removed]
        > > >
        > > >
        > > >
        > > > ------------------------------------
        > > >
        > > > www.machsupport.com - Web site AccessYahoo! Groups Links
        > > >
        > > >
        > > >
        > > >
        > > >
        > > > ------------------------------------
        > > >
        > > > www.machsupport.com - Web site AccessYahoo! Groups Links
        > > >
        > > >
        > > >
        > > >
        > >
        > > [Non-text portions of this message have been removed]
        > >
        > > ------------------------------------
        > >
        > > www.machsupport.com - Web site AccessYahoo! Groups Links
        > >
        > > __________________________________________________________
        > > Looking for the perfect gift? Give the gift of Flickr!
        > >
        > > http://www.flickr.com/gift/
        > >
        > > [Non-text portions of this message have been removed]
        > >
        > > ------------------------------------
        > >
        > > www.machsupport.com - Web site AccessYahoo! Groups Links
        > >
        > >
        > >
        >
        >
        > [Non-text portions of this message have been removed]
        >
        >
        >
        > ------------------------------------
        >
        > www.machsupport.com - Web site AccessYahoo! Groups Links
        >
        >
        >
        >
        >
        > ------------------------------------
        >
        > www.machsupport.com - Web site AccessYahoo! Groups Links
        >
        >
        >
        >


        [Non-text portions of this message have been removed]
      Your message has been successfully submitted and would be delivered to recipients shortly.