Loading ...
Sorry, an error occurred while loading the content.

4231Re: [loopantennas] Polyvaricon question

Expand Messages
  • robert baker
    Nov 1, 2007
    • 0 Attachment
      If you are using it for AM you'll need to use one or both of sections with the most plates.

      EB2CWS <eb2cws@...> wrote: Hello folks,

      I have got a Mitsumi polyvaricon capacitor to install in my new homebrew
      loop antenna.

      The model is PVC-22J20TI (obsolete), so there is not any datasheet in the
      Mitsumi
      web.

      The problem I have right now is that I don't know which connections of the
      capacitor
      to use, so I would be very glad if anyone can help.

      This polyvaricon seems to have two stages, one for FM and the other one for
      AM
      (it was designed for an SW receiver). There are 8 connections, 4 of them
      named
      as follows: C1, C2, FC1 and FC2. Is suppose that C1 and C2 belong to the AM
      stage and FC1, FC2 to the FM stage.

      If you see the main connections side of the box, they are distributed as
      follows:

      Upper part: C1 ----- "Pin 1" ----- C2

      Lower part: FC1 --- "Pin 2" ---- FC3

      Rotating the condenser 90 degrees to see other side, just above C1 there is
      another "Pin 3" and above
      C2 another "Pin 4".

      I would like to use the capacitor for my tuned loop, so the question is
      which
      pins should I use to take advantage of the variable capacitance to tune
      the antenna at different frequencies, and also use the maximum capacitance
      possible to reach the lowest HF frequencies.

      I can take a picture of the Polyvaricon and send it to you if necessary.

      Thanks and best 73!

      Ismael - EB2CWS - Madrid (Spain).

      [Non-text portions of this message have been removed]





      __________________________________________________
      Do You Yahoo!?
      Tired of spam? Yahoo! Mail has the best spam protection around
      http://mail.yahoo.com

      [Non-text portions of this message have been removed]
    • Show all 2 messages in this topic