Re: [linuxham] tx / rx 'volume' controls
- On Sunday 07 February 2010 05:35:08 pm you wrote:
> I'm not getting anywhere figuring out why, with the 'manage mixer' box inI don't have the Signalink unit, so don't know the specifics on the soundcard
> soundcard configuration>mixer checked, adjusting the sliders on the main
> fldigi screen appears to have no effect on anything.
Does the KDE or Gnome mixer have controls for the Signalink unit on a tab?
I.e. can the soundcard's levels be adjusted via a software mixer at all?
If not, you are not going to get the mixer sliders in Fldigi working.
As far as I know there haven't been any changes to the mixer portion of Fldigi
for a while, so what you have should be workable.
Since this Signalink unit is a second soundcard, you will have to alias the
mixer controls and the then (probably) map mixer elements manually. On some
primary soundcards this is needed also.
Fldigi used the alsa-oss emulated mixer to adjust the soundcard's software
mixer elements. Make sure this is installed. Then make sure the alsa-oss
emulated mixer elements are mapped to the correct actual controls on your
soundcard. The package maintainer for your soundcard driver generally does
this mapping, but it's not always done right.
I have posted details on how to determine what to do and how to re-map these
mixer controls (if you need to) on the list a few times. You will find the
details on a list search at the list's Yahoo page.
But again, if the Signalink unit has no software adjustable controls, you are
out of luck.
Does anyone know if it does?
Rick Kunath, k9ao
- Roger & Rick
Thanks for the info. I'll try some more searching of the list here about the 'remapping', but if nothing makes sense to me (I a Linux noob) it appears it won't be a deal-breaker.
- On Sunday 07 February 2010 06:43:43 pm you wrote:
> Thanks for the info. I'll try some more searching of the list here aboutThe first thing is to see if there are even software controls for the Signalink
> the 'remapping', but if nothing makes sense to me (I a Linux noob) it
> appears it won't be a deal-breaker.
unit. The mixer for the driver in use should have these shown.
In KDE (or Gnome) you'd get a mixer window with a tab for each recognized
soundcard. If you see one for the Signalink unit, you can likely get the
Fldigi mixer sliders working easily.
Rick Kunath, k9ao
- o11oo1oo wrote:
> Roger & RickHere is the link ::
> Thanks for the info. I'll try some more searching of the list here about the 'remapping', but if nothing makes sense to me (I a Linux noob) it appears it won't be a deal-breaker.
- Just leave the standard audio settings on the netbook at maximum. Be sure to tag the Audio Codec soundcard in the fldigi soundcard menu.This works just fine with the EeePC 900 and the USB SignaLink in Ubunto.Vy 73 de Mike GU3WHN----- Original Message -----From: o11oo1ooSent: Sunday, February 07, 2010 10:35 PMSubject: [linuxham] tx / rx 'volume' controls
I'm not getting anywhere figuring out why, with the 'manage mixer' box in soundcard configuration> mixer checked, adjusting the sliders on the main fldigi screen appears to have no effect on anything.
Reading the online documentation i see it mentions that I need to have 'libportaudio2' on my system. I can't find anything exactly like that, only 'portaudio-19- 9'. I have been able to decode signals off the air ok. Does this tell me I don't need to keep trying to find libportaudio2 ?
I'm trying to use a signalink USB, which has its own TX and RX pots., so maybe I'm safe just leaving 'manage mixer' un-checked and just using the physical knobs on the signalink?
Also in my surfing for answers I found Fedora 12's repository, it appears to me, does not contain the most current release of fldigi. Could this be my problem? Do I need to see about a different method for getting version 3.12 installed instead of what I have (3.11.6)?