Loading ...
Sorry, an error occurred while loading the content.

Re: [linuxham] Re: cat ft 840

Expand Messages
  • Ed
    ... Did you check the PTT via Hamlib Command ? and if so and it did not work, then you will need a seperate interface for PTT. Ed W3NR
    Message 1 of 5 , Mar 26, 2009
    • 0 Attachment
      kf4wbs wrote:

      > HI ED
      >
      > I REALIZED I LEFT A LITTEL INFO OUT AFTER THE FIRST POST IF YOU LOOK AT THE SECOND POST YOU WILL SEE I ADDED THE PROGRAM IN QUESTION FLDIGI.............
      >
      > YOU USED THE FIRST POST I AM USING A CAT CONTROL CABLE AND HAVE TRIED BOTH HAMLIB AND RIGCAT TO GET THE RIG UNDER CAT CONTROL
      > THE RIGCAT WONT CONTROL ANYTHING THE HAMLIB USING THE FT 890 SETTINGS WILL DO EVERYTHING EXCEPT KEY THE RIG THE SETTINGS ARE DTR ON / XON/XOFF FLOW IS ON THIS SHOW`S CAT CONTROL CONDITION ON THE RIG THERE IS NO VOX ON THE FT 840 AND I AM USING THE COM PORT FOR THE CAT CONTOLLER AGAIN PC-ALE WORKS USING THE FT 890 DLL MEANING THE COMMANDS ARE THERE ALSO CI-V COMMANDER ALSO HAS FULL CONTROL IT WILL READ AND MAKE FREQ CHANGES FROM THE COMPUTER AND WILL ALSO KEY THE RADIO
      >
      > I DONT KNOW IF THE XML FILE FOR HAMIL IN FLDIGI CAN BE MODIFIED TO WORK OR NOT
      >
      > THANKS FOR YOUR INTEREST
      >
      > DAVID KF4WBS
      >
      >


      Did you check the PTT via Hamlib Command ? and if so and it did not
      work, then you will need a seperate interface for PTT.


      Ed W3NR
    Your message has been successfully submitted and would be delivered to recipients shortly.