Linux Mint 15, WSJTX, SL_USB, & K3 play nice together.
- After only a few days of tinkering around, I am happy to report the following equipment and programs have decided to play nice on my new Linux box.
(a big shout out goes to N8TL for a couple of very helpful sound card clues, and for reminding me of this list <g>)
AMD 4.0Ghz 8 core w/ 16Gig of ram
Linux Mint 15
WSJT-X v1.1, r3496
under Setup/Configuration/Station my settings are:
PTT method: CAT PTT Port: None
[x] Enable PSK Reporter [x] CW ID after 73 CD ID Interval (min): 0
[x] Enable CAT Rig 229 Elecraft K3/KX3
CAT port: /dev/ttyS0 [ ] RTS/DTR OFF Data bits: 8
Serial rate: 38400 (x) Data Stop bits: 2
Handshake: None [x] Split Tx
Polling interval (s): 4
Audio In: Dev 15 CH 32 API ALSA Name pulse
Audio Out: Dev 5 CH 2 API ALSA Name USB Audio CODEC: USB Audio (hw:3,0)
when trying to use USB Audio CODEC: USB Audio (hw:3,0) for Audio In
I get a popup window that says:
error in Sound in
"Port Audio says requested sound card format not supported"
and another popup window that says:
"Failed to start audio input stream"
Using FLDigi, using PortAudio, both Capture and Playback work fine using USB Audio CODEC: USB Audio (hw:3,0)
With WSJTX I was stuck with TX only, no RX, until it dawned on me the SignaLink USB has an Aux out jack in the rear panel. So I have taken the 'AUX out' from the SignaLink USB and fed it into the Line In for my motherboard's sound card and that allows me to receive.
Proof in the pudding was a contact on JT65 as well as one on JT9.
73 & GB