Loading ...
Sorry, an error occurred while loading the content.

weird problems with suse 10.2

Expand Messages
  • George Osvald
    Recently I upgraded my computers to Suse 10.2. Two of them were no problem but the third one gives me a headache. Since the upgrade it would not print into my
    Message 1 of 1 , May 6, 2007
    • 0 Attachment
      Recently I upgraded my computers to Suse 10.2. Two of them were no
      problem but the third one gives me a headache.
      Since the upgrade it would not print into my HP Officejet. It still
      prints into Dymo labelwriter because I have it set up as raw printer.
      I get this error message from my CUPS server:
      "/usr/lib/cups/filter/foomatic-rip failed"
      I tried all sorts of things without a success. This printer was
      printing fine with a previous version and I also have two other (with
      SuSe 10.2) computers printing into HP printers no problems.
      Also I am having problems with syslog-ng which will not start,
      postfix, klogd, earlysyslog, mdnsd, ntp, nscd. Aparmor doesn't work
      properly as well but I do not wary about that at this stage. Most
      services fail due to segmentation fault or of course dependancy problems.
      This is my boot.msg:

      Trying manual resume from /dev/hda1
      Creating device nodes with udev
      Loading ide-core
      Loading ide-disk
      Loading processor
      Loading thermal
      Loading amd74xx
      Loading fan
      Loading edd
      Loading jbd
      Loading mbcache
      Loading ext3
      Invoking userspace resume from /dev/hda1
      resume: Could not stat configuration file
      resume: libgcrypt version: 1.2.3
      resume: Could not read the image
      Invoking in-kernel resume from /dev/hda1
      Waiting for device /dev/hda2 to appear: ok
      fsck 1.39 (29-May-2006)
      [/bin/fsck.ext3 (1) -- /] fsck.ext3 -a -C0 /dev/hda2
      /dev/hda2: clean, 226853/9256960 files, 1750395/18486798 blocks
      fsck succeeded. Mounting root device read-write.
      Mounting root /dev/hda2

      Boot logging started on /dev/tty1(/dev/console (deleted)) at Mon May
      7 12:44:43 2007

      <notice>boot.udev start
      Starting udevd done
      <notice>'boot.udev start' exits with status 0
      <notice>boot.rootfsck start
      Activating swap-devices in /etc/fstab...
      done<notice>'boot.rootfsck start' exits with status 0
      <notice>boot.loadmodules start
      Loading required kernel modules
      done<notice>'boot.loadmodules start' exits with status 0
      <notice>boot.preload_early start
      done
      <notice>'boot.preload_early start' exits with status 0
      <notice>boot.device-mapper start
      Activating device mapper...
      done
      <notice>'boot.device-mapper start' exits with status 0
      <notice>boot.md start
      Starting MD Raid done
      <notice>'boot.md start' exits with status 0
      <notice>boot.lvm start
      Waiting for udev to settle...
      Scanning for LVM volume groups...
      Reading all physical volumes. This may take a while...
      No volume groups found
      No volume groups found
      Activating LVM volume groups...
      No volume groups found
      done
      <notice>'boot.lvm start' exits with status 0
      <notice>boot.localfs start
      Checking file systems...
      fsck 1.39 (29-May-2006)
      /dev/hdb1: clean, 54131/5020064 files, 1543075/10036600 blocks
      donedone
      Mounting local file systems...
      proc on /proc type proc (rw)
      sysfs on /sys type sysfs (rw)
      debugfs on /sys/kernel/debug type debugfs (rw)
      udev on /dev type tmpfs (rw)
      devpts on /dev/pts type devpts (rw,mode=0620,gid=5)
      /dev/hdb1 on /backup type ext3 (rw,acl,user_xattr)
      done<notice>'boot.localfs start' exits with status 0
      <notice>boot.apparmor start
      Loading AppArmor module done
      Mounting securityfs on /sys/kernel/security done
      Loading AppArmor profiles Skipping profile
      /etc/apparmor.d/bin.netstat.rpmnew
      Skipping profile /etc/apparmor.d/bin.netstat.rpmsave
      Skipping profile /etc/apparmor.d/bin.ping.rpmnew
      Skipping profile /etc/apparmor.d/lib.ld-2.2.so.rpmnew
      Skipping profile /etc/apparmor.d/lib.ld-2.2.so.rpmsave
      Skipping profile /etc/apparmor.d/sbin.klogd.rpmnew
      Skipping profile /etc/apparmor.d/sbin.syslogd.rpmnew
      Skipping profile /etc/apparmor.d/usr.bin.ldd.rpmnew
      Skipping profile /etc/apparmor.d/usr.bin.ldd.rpmsave
      Skipping profile /etc/apparmor.d/usr.lib.postfix.anvil.rpmnew
      Skipping profile /etc/apparmor.d/usr.lib.postfix.bounce.rpmnew
      Skipping profile /etc/apparmor.d/usr.lib.postfix.cleanup.rpmnew
      Skipping profile /etc/apparmor.d/usr.lib.postfix.discard.rpmnew
      Skipping profile /etc/apparmor.d/usr.lib.postfix.error.rpmnew
      Skipping profile /etc/apparmor.d/usr.lib.postfix.flush.rpmnew
      Skipping profile /etc/apparmor.d/usr.lib.postfix.lmtp.rpmnew
      Warning (/etc/apparmor.d/usr.lib.postfix.local line 385):
      Unconstrained exec qualifier (ux) allows some dangerous environment
      variables to be passed to the unconfined process; 'man 5 apparmor.d'
      for details.
      Skipping profile /etc/apparmor.d/usr.lib.postfix.local.rpmnew
      Skipping profile /etc/apparmor.d/usr.lib.postfix.master.rpmnew
      Skipping profile /etc/apparmor.d/usr.lib.postfix.nqmgr.rpmnew
      Skipping profile /etc/apparmor.d/usr.lib.postfix.oqmgr.rpmnew
      Skipping profile /etc/apparmor.d/usr.lib.postfix.pickup.rpmnew
      Skipping profile /etc/apparmor.d/usr.lib.postfix.pipe.rpmnew
      Skipping profile /etc/apparmor.d/usr.lib.postfix.proxymap.rpmnew
      Skipping profile /etc/apparmor.d/usr.lib.postfix.qmgr.rpmnew
      Skipping profile /etc/apparmor.d/usr.lib.postfix.qmqpd.rpmnew
      Skipping profile /etc/apparmor.d/usr.lib.postfix.scache.rpmnew
      Skipping profile /etc/apparmor.d/usr.lib.postfix.showq.rpmnew
      Skipping profile /etc/apparmor.d/usr.lib.postfix.smtp.rpmnew
      Skipping profile /etc/apparmor.d/usr.lib.postfix.smtpd.rpmnew
      Skipping profile /etc/apparmor.d/usr.lib.postfix.spawn.rpmnew
      Skipping profile /etc/apparmor.d/usr.lib.postfix.tlsmgr.rpmnew
      Skipping profile /etc/apparmor.d/usr.lib.postfix.trivial-rewrite.rpmnew
      Skipping profile /etc/apparmor.d/usr.lib.postfix.verify.rpmnew
      Skipping profile /etc/apparmor.d/usr.lib.postfix.virtual.rpmnew
      Skipping profile /etc/apparmor.d/usr.sbin.identd.rpmnew
      Skipping profile /etc/apparmor.d/usr.sbin.mdnsd.rpmnew
      Skipping profile /etc/apparmor.d/usr.sbin.named.rpmnew
      Skipping profile /etc/apparmor.d/usr.sbin.nscd.rpmnew
      Skipping profile /etc/apparmor.d/usr.sbin.ntpd.rpmnew
      Skipping profile /etc/apparmor.d/usr.sbin.postalias.rpmnew
      Skipping profile /etc/apparmor.d/usr.sbin.postdrop.rpmnew
      Skipping profile /etc/apparmor.d/usr.sbin.postmap.rpmnew
      Skipping profile /etc/apparmor.d/usr.sbin.postqueue.rpmnew
      Warning (/etc/apparmor.d/usr.sbin.sendmail line 555): Unconstrained
      exec qualifier (ux) allows some dangerous environment variables to be
      passed to the unconfined process; 'man 5 apparmor.d' for details.
      Warning (/etc/apparmor.d/usr.sbin.sendmail line 591): Unconstrained
      exec qualifier (ux) allows some dangerous environment variables to be
      passed to the unconfined process; 'man 5 apparmor.d' for details.
      Skipping profile /etc/apparmor.d/usr.sbin.sendmail.rpmnew
      Skipping profile /etc/apparmor.d/usr.sbin.squid.rpmnew
      Skipping profile /etc/apparmor.d/usr.sbin.traceroute.rpmnew
      warning
      <notice>'boot.apparmor start' exits with status 0
      <notice>boot.cleanup start
      Cleaning temporary directories /tmpdone
      <notice>'boot.cleanup start' exits with status 0
      <notice>boot.clock start
      Setting up the hardware clockdone
      <notice>'boot.clock start' exits with status 0
      <notice>boot.klog start
      Creating /var/log/boot.msg
      /sbin/klogd: error while loading shared libraries: libc.so.6: failed
      to map segment from shared object: Operation not permitted
      failed<notice>killproc: kill(887,29)
      <notice>'boot.klog start' exits with status 0
      <notice>boot.proc start
      <notice>'boot.proc start' exits with status 0
      <notice>boot.scpm start
      <notice>'boot.scpm start' exits with status 0
      <notice>boot.udev_retry start
      <notice>'boot.udev_retry start' exits with status 0
      <notice>boot.videobios start
      <notice>'boot.videobios start' exits with status 0
      <notice>setserial start
      Configuring serial ports...
      /dev/ttyS0 at 0x03f8 (irq = 4) is a 16550A
      /dev/ttyS1 at 0x02f8 (irq = 3) is a 16550A
      Configured serial ports
      done<notice>'setserial start' exits with status 0
      <notice>boot.crypto start
      <notice>'boot.crypto start' exits with status 0
      <notice>boot.isapnp start
      <notice>'boot.isapnp start' exits with status 0
      <notice>boot.localnet start
      Setting up hostname 'shop'done
      Setting up loopback interface lo
      lo IP address: 127.0.0.1/8
      done
      <notice>'boot.localnet start' exits with status 0
      <notice>boot.preload start
      done
      <notice>'boot.preload start' exits with status 0
      <notice>boot.swap start
      Activating remaining swap-devices in /etc/fstab...
      done<notice>'boot.swap start' exits with status 0
      <notice>SuSEfirewall2_init start
      Starting Firewall Initialization (phase 1 of 2) SuSEfirewall2:
      Warning: ip6tables does not support state matching. Extended IPv6
      support disabled.
      done
      <notice>'SuSEfirewall2_init start' exits with status 0
      <notice>boot.ldconfig start
      <notice>'boot.ldconfig start' exits with status 0
      <notice>boot.sysctl start
      Setting current sysctl status from /etc/sysctl.conf
      net.ipv4.icmp_echo_ignore_broadcasts = 1
      net.ipv4.conf.all.rp_filter = 1
      done
      <notice>'boot.sysctl start' exits with status 0
      <notice>boot.ipconfig start
      Enabling syn flood protectiondone
      Enabling IP forwardingdone
      Disabling IPv6 forwardingdone
      Disabling IPv6 privacydone
      done
      <notice>'boot.ipconfig start' exits with status 0
      System Boot Control: The system has been set up
      System Boot Control: Running /etc/init.d/boot.local
      done<notice>killproc: kill(887,3)

      INIT:
      Boot logging started on /dev/tty1(/dev/console) at Mon May 7 12:45:05
      2007

      Master Resource Control: previous runlevel: N, switching to runlevel: 5
      Loading AppArmor profiles - AppArmor already loaded with profiles.skipped
      Entering runlevel: 5


      <notice>startproc: execve (/usr/bin/dbus-daemon) [
      /usr/bin/dbus-daemon --system ], [ CONSOLE=/dev/console
      ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX
      INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=124
      PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x317 RUNLEVEL=5 PWD=/
      SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1024x768.cfg
      PREVLEVEL=N LINES=44 HOME=/ SHLVL=2 splash=silent SPLASH=yes
      ROOTFS_BLKDEV=/dev/hda2 _=/sbin/startproc DAEMON=/usr/bin/dbus-daemon ]
      <notice>startproc: execve (/sbin/acpid) [ /sbin/acpid ], [
      CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux
      ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86
      REDIRECT=/dev/tty1 COLUMNS=124 PATH=/bin:/sbin:/usr/bin:/usr/sbin
      vga=0x317 RUNLEVEL=5 PWD=/
      SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1024x768.cfg
      PREVLEVEL=N LINES=44 HOME=/ SHLVL=2 splash=silent SPLASH=yes
      ROOTFS_BLKDEV=/dev/hda2 _=/sbin/startproc DAEMON=/sbin/acpid ]
      Starting D-Bus daemondone
      [acpid]: starting up


      [acpid]: 0 rules loaded


      acpid: loading ACPI modules ( ac battery button ) done
      acpid: will not skip unsupported modules
      acpid: loading ACPI laptop modules ( ) done
      Starting acpid done
      <notice>startproc: execve (/sbin/syslog-ng) [ /sbin/syslog-ng -a
      /var/lib/named/dev/log -a /var/lib/ntp/dev/log ], [
      CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 TERM=linux SHELL=/bin/sh
      ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86
      REDIRECT=/dev/tty1 COLUMNS=124 PATH=/bin:/sbin:/usr/bin:/usr/sbin
      vga=0x317 RUNLEVEL=5
      SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1024x768.cfg
      PWD=/ PREVLEVEL=N LINES=44 SHLVL=2 HOME=/ SPLASH=yes splash=silent
      ROOTFS_BLKDEV=/dev/hda2 _=/sbin/startproc DAEMON=/sbin/syslog-ng ]
      <notice>startproc: execve (/sbin/klogd) [ /sbin/klogd -c 1 -x -x ], [
      CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 TERM=linux SHELL=/bin/sh
      ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86
      REDIRECT=/dev/tty1 COLUMNS=124 PATH=/bin:/sbin:/usr/bin:/usr/sbin
      vga=0x317 RUNLEVEL=5
      SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1024x768.cfg
      PWD=/ PREVLEVEL=N LINES=44 SHLVL=2 HOME=/ SPLASH=yes splash=silent
      ROOTFS_BLKDEV=/dev/hda2 _=/sbin/startproc DAEMON=/sbin/klogd ]
      Starting syslog servicesstartproc: signal catched /sbin/syslog-ng:
      Segmentation fault
      /sbin/klogd: error while loading shared libraries: libc.so.6: failed
      to map segment from shared object: Operation not permitted
      startproc: exit status of parent of /sbin/klogd: 127
      failed
      Starting irqbalance unused
      Initializing random number generatordone
      <notice>startproc: execve (/sbin/resmgrd) [ /sbin/resmgrd ], [
      CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux
      ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86
      REDIRECT=/dev/tty1 COLUMNS=124 PATH=/bin:/sbin:/usr/bin:/usr/sbin
      vga=0x317 RUNLEVEL=5 PWD=/
      SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1024x768.cfg
      PREVLEVEL=N LINES=44 HOME=/ SHLVL=2 splash=silent SPLASH=yes
      ROOTFS_BLKDEV=/dev/hda2 _=/sbin/startproc DAEMON=/sbin/resmgrd ]
      Starting resource managerdone
      <notice>startproc: execve (/usr/sbin/polkitd) [ /usr/sbin/polkitd ], [
      CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux
      ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86
      REDIRECT=/dev/tty1 COLUMNS=124 PATH=/bin:/sbin:/usr/bin:/usr/sbin
      vga=0x317 RUNLEVEL=5 PWD=/
      SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1024x768.cfg
      PREVLEVEL=N LINES=44 HOME=/ SHLVL=2 splash=silent SPLASH=yes
      ROOTFS_BLKDEV=/dev/hda2 _=/sbin/startproc DAEMON=/usr/sbin/polkitd ]
      Starting PolicyKit daemondone
      <notice>startproc: execve (/usr/sbin/hald) [ /usr/sbin/hald
      --daemon=yes ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3
      SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX
      INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=124
      PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x317 RUNLEVEL=5 PWD=/
      SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1024x768.cfg
      PREVLEVEL=N LINES=44 HOME=/ SHLVL=2 splash=silent SPLASH=yes
      ROOTFS_BLKDEV=/dev/hda2 _=/sbin/startproc DAEMON=/usr/sbin/hald ]
      Loading keymap i386/qwerty/us.map.gz
      doneLoading compose table winkeys shiftctrl latin1.adddone
      Start Unicode mode
      doneLoading console font lat9w-16.psfu -m trivial G0:loadable
      doneStarting HAL daemondone
      Loading CPUFreq modules (CPUFreq not supported)
      Setting up network interfaces:
      lo
      lo IP address: 127.0.0.1/8
      done eth0 device: Realtek Semiconductor Co., Ltd. RTL-8169
      Gigabit Ethernet (rev 10)
      eth0 configuration: eth-id-00:0d:61:7d:6b:da
      eth0 IP address: 192.168.1.1/24
      doneSetting up service network . . . . . . . . . . . . .
      . . .done
      <notice>startproc: execve (/usr/sbin/mdnsd) [ /usr/sbin/mdnsd -f
      /etc/nss_mdns.conf -b ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3
      SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX
      INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=124
      PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x317 RUNLEVEL=5 PWD=/
      SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1024x768.cfg
      PREVLEVEL=N LINES=44 HOME=/ SHLVL=2 splash=silent SPLASH=yes
      ROOTFS_BLKDEV=/dev/hda2 _=/sbin/startproc DAEMON=/usr/sbin/mdnsd ]
      Starting mdnsdstartproc: signal catched /usr/sbin/mdnsd: Segmentation
      fault
      failed
      [acpid]: client connected from 3355[101:102]


      [acpid]: 1 client rule loaded


      <notice>startproc: execve (/sbin/auditd) [ /sbin/auditd -n ], [
      CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux
      ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86
      REDIRECT=/dev/tty1 COLUMNS=124 PATH=/bin:/sbin:/usr/bin:/usr/sbin
      vga=0x317 RUNLEVEL=5 PWD=/
      SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1024x768.cfg
      PREVLEVEL=N LINES=44 HOME=/ SHLVL=2 splash=silent SPLASH=yes
      ROOTFS_BLKDEV=/dev/hda2 _=/sbin/startproc DAEMON=/sbin/auditd ]
      Starting auditd done
      <notice>startproc: execve (/sbin/portmap) [ /sbin/portmap ], [
      CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux
      ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86
      REDIRECT=/dev/tty1 COLUMNS=124 PATH=/bin:/sbin:/usr/bin:/usr/sbin
      vga=0x317 RUNLEVEL=5 PWD=/
      SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1024x768.cfg
      PREVLEVEL=N LINES=44 HOME=/ SHLVL=2 splash=silent SPLASH=yes
      ROOTFS_BLKDEV=/dev/hda2 _=/sbin/startproc DAEMON=/sbin/portmap ]
      Starting RPC portmap daemondone
      Importing Net File System (NFS)unused
      Starting hpiod: [ OK ]

      Starting hpssd: [ OK ]

      Note: You may have to restart the cupsd.
      Checking/updating CPU microcode unused
      Starting nfsboot (sm-notify) done
      Starting ZENworks Management Daemondone
      Try to get initial date and time via NTP from 0.pool.ntp.org
      1.pool.ntp.org 2.pool.ntp.org<notice>startproc: execve
      (/usr/sbin/powersaved) [ /usr/sbin/powersaved -d -f
      /var/run/acpid.socket -v 3 ], [ HOME=/
      PATH=/bin:/sbin:/usr/bin:/usr/sbin SHELL=/bin/sh RUNLEVEL=5
      PREVLEVEL=N DAEMON=/usr/sbin/powersaved ]
      [acpid]: client connected from 3563[0:0]


      [acpid]: 1 client rule loaded


      <notice>startproc: execve (/opt/kde3/bin/kdm) [ /opt/kde3/bin/kdm ], [
      CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 TERM=linux SHELL=/bin/sh
      ROOTFS_FSCK=0 QTDIR=/usr/lib/qt3 INIT_VERSION=sysvinit-2.86
      KDEROOTHOME=/root/.kdm REDIRECT=/dev/tty1 COLUMNS=124
      PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x317 RUNLEVEL=5
      SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1024x768.cfg
      PWD=/ LANG=en_US.UTF-8 PREVLEVEL=N LINES=44
      QT_SYSTEM_DIR=/usr/share/desktop-data SHLVL=2 HOME=/
      XCURSOR_THEME=crystalwhite WINDOWMANAGER=/usr/bin/kde
      LC_CTYPE=en_US.UTF-8 SPLASH=yes splash=silent ROOTFS_BLKDEV=/dev/hda2
      _=/sbin/startproc DAEMON=/opt/kde3/bin/kdm ]
      <notice>startproc: execve (/usr/sbin/cupsd) [ /usr/sbin/cupsd ], [
      CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux
      ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86
      REDIRECT=/dev/tty1 COLUMNS=124 PATH=/bin:/sbin:/usr/bin:/usr/sbin
      vga=0x317 RUNLEVEL=5 PWD=/
      SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1024x768.cfg
      PREVLEVEL=N LINES=44 HOME=/ SHLVL=2 splash=silent SPLASH=yes
      ROOTFS_BLKDEV=/dev/hda2 _=/usr/bin/ionice DAEMON=/usr/sbin/cupsd ]
      [acpid]: client connected from 3694[0:0]


      [acpid]: 1 client rule loaded


      <notice>startproc: execve (/usr/sbin/ntpd) [ /usr/sbin/ntpd -p
      /var/lib/ntp/var/run/ntp/ntpd.pid -u ntp -i /var/lib/ntp ], [
      CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux
      ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86
      REDIRECT=/dev/tty1 COLUMNS=124 PATH=/bin:/sbin:/usr/bin:/usr/sbin
      vga=0x317 RUNLEVEL=5 PWD=/
      SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1024x768.cfg
      PREVLEVEL=N LINES=44 HOME=/ SHLVL=2 splash=silent SPLASH=yes
      ROOTFS_BLKDEV=/dev/hda2 _=/sbin/startproc DAEMON=/usr/sbin/ntpd ]
      done
      Starting network time protocol daemon (NTPD)startproc: signal catched
      /usr/sbin/ntpd: Segmentation fault
      failed
      Starting powersaved: done
      Mount CIFS File Systems unused
      Starting service kdmdone
      Starting cupsddone
      Starting service kdmdone
      <notice>startproc: execve (/usr/sbin/nscd) [ /usr/sbin/nscd ], [
      CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux
      ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86
      REDIRECT=/dev/tty1 COLUMNS=124 PATH=/bin:/sbin:/usr/bin:/usr/sbin
      vga=0x317 RUNLEVEL=5 PWD=/
      SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1024x768.cfg
      PREVLEVEL=N LINES=44 HOME=/ SHLVL=2 splash=silent SPLASH=yes
      ROOTFS_BLKDEV=/dev/hda2 _=/sbin/startproc DAEMON=/usr/sbin/nscd ]
      Starting Name Service Cache Daemonstartproc: signal catched
      /usr/sbin/nscd: Segmentation fault
      failed
      Starting PostgreSQLLOG: database system was shut down at 2007-05-07
      12:43:49 EST
      LOG: checkpoint record is at 0/1A199D24
      LOG: redo record is at 0/1A199D24; undo record is at 0/0; shutdown TRUE
      LOG: next transaction ID: 562373; next OID: 219252
      LOG: next MultiXactId: 1; next MultiXactOffset: 0
      FATAL: the database system is starting up
      LOG: database system is ready
      LOG: transaction ID wrap limit is 2147484146, limited by database
      "postgres"
      done
      Starting mail service (Postfix)failed
      <notice>startproc: execve (/usr/sbin/cron) [ /usr/sbin/cron ], [
      CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux
      ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86
      REDIRECT=/dev/tty1 COLUMNS=124 PATH=/bin:/sbin:/usr/bin:/usr/sbin
      vga=0x317 RUNLEVEL=5 PWD=/
      SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1024x768.cfg
      PREVLEVEL=N LINES=44 HOME=/ SHLVL=2 splash=silent SPLASH=yes
      ROOTFS_BLKDEV=/dev/hda2 _=/sbin/startproc DAEMON=/usr/sbin/cron ]
      Starting CRON daemondone
      Starting httpd2 (worker) <notice>startproc: execve
      (/usr/sbin/httpd2-worker) [ /usr/sbin/httpd2-worker -f
      /etc/apache2/httpd.conf -DSSL ], [ CONSOLE=/dev/console
      ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0
      get_module_list_done=true LC_ALL=POSIX INIT_VERSION=sysvinit-2.86
      REDIRECT=/dev/tty1 COLUMNS=124 get_includes_done=true
      PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x317 RUNLEVEL=5 PWD=/
      SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1024x768.cfg
      PREVLEVEL=N LINES=44 HOME=/ SHLVL=2 splash=silent SPLASH=yes
      ROOTFS_BLKDEV=/dev/hda2 _=/sbin/startproc DAEMON=/usr/sbin/httpd2-worker ]
      done
      done
      Starting Firewall Initialization (phase 2 of 2) SuSEfirewall2:
      Warning: ip6tables does not support state matching. Extended IPv6
      support disabled.
      <notice>checkproc: /opt/kde3/bin/kdm 3622
      done
      Master Resource Control: runlevel 5 has been reached
      Failed services in runlevel 5: earlysyslog mdnsd ntp nscd postfix
      Skipped services in runlevel 5: irq_balancer nfs microcode smbfs
      <notice>killproc: kill(2559,3)
    Your message has been successfully submitted and would be delivered to recipients shortly.