Loading ...
Sorry, an error occurred while loading the content.

Can not connect to browser while Wireless. Can you please help?

Expand Messages
  • Shipa Rahman
    Hi, I can connect my browser when I use LAN but my wireless does not connect. Is there a way I can configure wireless? Your help will be greatly appreciated
    Message 1 of 2 , Jan 1, 2007
    • 0 Attachment
      Hi,

      I can connect my browser when I use LAN but my wireless does not
      connect. Is there a way I can configure wireless? Your help will be greatly appreciated regarding this issue.

      Here I restart network and its failed while I was wireless -

      [root@localhost network-scripts]# /etc/init.d/network restart
      Shutting down interface eth0: [ OK ]
      Shutting down loopback interface: [ OK ]
      Bringing up loopback interface: [ OK ]
      Bringing up interface eth0:
      Determining IP information for eth0... failed; no link present. Check
      cable?
      [FAILED]
      [root@localhost network-scripts]#



      Below is the info about LAN connection -
      -------------------------------------------
      [root@localhost network-scripts]# /etc/init.d/network restart
      Shutting down loopback interface:
      [ OK ]
      Bringing up loopback interface: [ OK ]
      Bringing up interface eth0:
      Determining IP information for eth0... done.
      [ OK ]
      [root@localhost network-scripts]#





      [root@localhost moislam]# /sbin/ifconfig -a
      eth0 Link encap:Ethernet HWaddr 00:0D:9D:84:3B:A5
      inet addr:192.168.1.102 Bcast:192.168.1.255
      Mask:255.255.255.0
      inet6 addr: fe80::20d:9dff:fe84:3ba5/64 Scope:Link
      UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
      RX packets:750 errors:0 dropped:0 overruns:0 frame:0
      TX packets:529 errors:0 dropped:0 overruns:0 carrier:0c
      collisions:0 txqueuelen:1000
      RX bytes:793472 (774.8 KiB) TX bytes:48052 (46.9 KiB)
      Interrupt:10 Base address:0x6000

      lo Link encap:Local Loopback
      inet
      addr:127.0.0.1 Mask:255.0.0.0
      inet6 addr: ::1/128 Scope:Host
      UP LOOPBACK RUNNING MTU:16436 Metric:1
      RX packets:1544 errors:0 dropped:0 overruns:0 frame:0
      TX packets:1544 errors:0 dropped:0 overruns:0 carrier:0
      collisions:0 txqueuelen:0
      RX bytes:1568258 (1.4 MiB) TX bytes:1568258 (1.4 MiB)

      sit0 Link encap:IPv6-in-IPv4
      NOARP MTU:1480 Metric:1
      RX packets:0 errors:0 dropped:0 overruns:0 frame:0
      TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
      collisions:0 txqueuelen:0
      RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)


      =============

      [root@localhost network-scripts]# more ifcfg-eth0
      DEVICE=eth0
      BOOTPROTO=dhcp
      ONBOOT=yes
      NAME=eth0
      TYPE=Ethernet
      [root@localhost network-scripts]#





      __________________________________________________
      Do You Yahoo!?
      Tired of spam? Yahoo! Mail has the best spam protection around
      http://mail.yahoo.com

      [Non-text portions of this message have been removed]
    • ed
      On Mon, 1 Jan 2007 13:07:51 -0800 (PST) ... i think eth0 is your wired connection. do you have iwconfig on your system? if so, does it s output show any
      Message 2 of 2 , Jan 1, 2007
      • 0 Attachment
        On Mon, 1 Jan 2007 13:07:51 -0800 (PST)
        Shipa Rahman <nishidep@...> wrote:

        > I can connect my browser when I use LAN but my wireless does not
        > connect. Is there a way I can configure wireless? Your help will be
        > greatly appreciated regarding this issue.
        >
        > Here I restart network and its failed while I was wireless -
        >
        > [root@localhost network-scripts]# /etc/init.d/network restart
        > Shutting down interface eth0: [ OK ]
        > Shutting down loopback interface: [ OK ]
        > Bringing up loopback interface: [ OK ]
        > Bringing up interface eth0:
        > Determining IP information for eth0... failed; no link present.
        > Check cable?
        > [FAILED]
        > [root@localhost network-scripts]#

        i think eth0 is your wired connection.

        do you have iwconfig on your system? if so, does it's output show any
        wireless devices?

        --
        Regards, Ed :: http://www.gnunix.net
        proud c++ person
        The sun will not burn out for millions of years... unless Mr. T
        decides otherwise.
      Your message has been successfully submitted and would be delivered to recipients shortly.