Loading ...
Sorry, an error occurred while loading the content.

Re: [linux-dell-laptops] XF86Config for Latitude CPx H500GT?

Expand Messages
  • Tony Molloy
    ... Chuck, I ve just installed 6.2 on a Latitude CPx J650GT and X configured with no trouble. It detected the video controller and I selected LCD 1024x768 as
    Message 1 of 2 , May 31, 2000
    • 0 Attachment
      On Wed, 31 May 2000, you wrote:
      > Having some major issues getting anything beyond VGA 16
      > working...could someone lend me theirs to use as a baseline?
      >
      > TIA,
      >
      > Chuck
      >

      Chuck,

      I've just installed 6.2 on a Latitude CPx J650GT and X configured with
      no trouble. It detected the video controller and I selected LCD
      1024x768 as the monitor. I've included the XF86Config file below.

      Regards

      Tony.


      # File generated by XConfigurator.

      # **********************************************************************
      # Refer to the XF86Config(4/5) man page for details about the format of
      # this file.
      # **********************************************************************

      # **********************************************************************
      # Files section. This allows default font and rgb paths to be set
      # **********************************************************************

      Section "Files"

      # The location of the RGB database. Note, this is the name of the
      # file minus the extension (like ".txt" or ".db"). There is normally
      # no need to change the default.

      RgbPath "/usr/X11R6/lib/X11/rgb"

      # Multiple FontPath entries are allowed (they are concatenated together)
      # By default, Red Hat 6.0 and later now use a font server independent of
      # the X server to render fonts.

      FontPath "/usr/X11R6/lib/X11/fonts/TrueType"
      FontPath "unix/:-1"

      EndSection

      # **********************************************************************
      # Server flags section.
      # **********************************************************************

      Section "ServerFlags"

      # Uncomment this to cause a core dump at the spot where a signal is
      # received. This may leave the console in an unusable state, but may
      # provide a better stack trace in the core dump to aid in debugging
      #NoTrapSignals

      # Uncomment this to disable the <Crtl><Alt><BS> server abort sequence
      # This allows clients to receive this key event.
      #DontZap

      # Uncomment this to disable the <Crtl><Alt><KP_+>/<KP_-> mode switching
      # sequences. This allows clients to receive these key events.
      #DontZoom

      EndSection

      # **********************************************************************
      # Input devices
      # **********************************************************************

      # **********************************************************************
      # Keyboard section
      # **********************************************************************

      Section "Keyboard"

      Protocol "Standard"

      # when using XQUEUE, comment out the above line, and uncomment the
      # following line
      #Protocol "Xqueue"

      AutoRepeat 500 5

      # Let the server do the NumLock processing. This should only be
      # required when using pre-R6 clients
      #ServerNumLock

      # Specify which keyboard LEDs can be user-controlled (eg, with xset(1))
      #Xleds 1 2 3

      #To set the LeftAlt to Meta, RightAlt key to ModeShift,
      #RightCtl key to Compose, and ScrollLock key to ModeLock:

      LeftAlt Meta
      RightAlt Meta
      ScrollLock Compose
      RightCtl Control

      # To disable the XKEYBOARD extension, uncomment XkbDisable.

      # XkbDisable

      # To customise the XKB settings to suit your keyboard, modify the
      # lines below (which are the defaults). For example, for a non-U.S.
      # keyboard, you will probably want to use:
      # XkbModel "pc102"
      # If you have a US Microsoft Natural keyboard, you can use:
      # XkbModel "microsoft"
      #
      # Then to change the language, change the Layout setting.
      # For example, a german layout can be obtained with:
      # XkbLayout "de"
      # or:
      # XkbLayout "de"
      # XkbVariant "nodeadkeys"
      #
      # If you'd like to switch the positions of your capslock and
      # control keys, use:
      # XkbOptions "ctrl:swapcaps"

      # These are the default XKB settings for XFree86
      # XkbRules "xfree86"
      # XkbModel "pc101"
      # XkbLayout "us"
      # XkbVariant ""
      # XkbOptions ""

      XkbKeycodes "xfree86"
      XkbTypes "default"
      XkbCompat "default"
      XkbSymbols "us(pc101)"
      XkbGeometry "pc"
      XkbRules "xfree86"
      XkbModel "pc101"
      XkbLayout "gb"
      EndSection

      # **********************************************************************
      # Pointer section
      # **********************************************************************

      Section "Pointer"
      Protocol "PS/2"
      Device "/dev/mouse"

      # When using XQUEUE, comment out the above two lines, and uncomment
      # the following line.

      # Protocol "Xqueue"

      # Baudrate and SampleRate are only for some Logitech mice

      # BaudRate 9600
      # SampleRate 150

      # Emulate3Buttons is an option for 2-button Microsoft mice
      # Emulate3Timeout is the timeout in milliseconds (default is 50ms)

      Emulate3Buttons
      Emulate3Timeout 50

      # ChordMiddle is an option for some 3-button Logitech mice

      # ChordMiddle

      EndSection


      # **********************************************************************
      # Monitor section
      # **********************************************************************

      # Any number of monitor sections may be present

      Section "Monitor"

      Identifier "LCD Panel 1024x768"
      VendorName "Unknown"
      ModelName "Unknown"

      # HorizSync is in kHz unless units are specified.
      # HorizSync may be a comma separated list of discrete values, or a
      # comma separated list of ranges of values.
      # NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S
      # USER MANUAL FOR THE CORRECT NUMBERS.

      HorizSync 31.5-48.5

      # VertRefresh is in Hz unless units are specified.
      # VertRefresh may be a comma separated list of discrete values, or a
      # comma separated list of ranges of values.
      # NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S
      # USER MANUAL FOR THE CORRECT NUMBERS.

      VertRefresh 60

      # Modes can be specified in two formats. A compact one-line format, or
      # a multi-line format.

      # These two are equivalent

      # ModeLine "1024x768i" 45 1024 1048 1208 1264 768 776 784 817 Interlace

      # Mode "1024x768i"
      # DotClock 45
      # HTimings 1024 1048 1208 1264
      # VTimings 768 776 784 817
      # Flags "Interlace"
      # EndMode

      # This is a set of standard mode timings. Modes that are out of monitor spec
      # are automatically deleted by the server (provided the HorizSync and
      # VertRefresh lines are correct), so there's no immediate need to
      # delete mode timings (unless particular mode timings don't work on your
      # monitor). With these modes, the best standard mode that your monitor
      # and video card can support for a given resolution is automatically
      # used.

      # 640x400 @ 70 Hz, 31.5 kHz hsync
      Modeline "640x400" 25.175 640 664 760 800 400 409 411 450
      # 640x480 @ 60 Hz, 31.5 kHz hsync
      Modeline "640x480" 25.175 640 664 760 800 480 491 493 525
      # 800x600 @ 56 Hz, 35.15 kHz hsync
      ModeLine "800x600" 36 800 824 896 1024 600 601 603 625
      # 1024x768 @ 87 Hz interlaced, 35.5 kHz hsync
      Modeline "1024x768" 44.9 1024 1048 1208 1264 768 776 784 817 Interlace

      # 640x400 @ 85 Hz, 37.86 kHz hsync
      Modeline "640x400" 31.5 640 672 736 832 400 401 404 445 -HSync +VSync
      # 640x480 @ 72 Hz, 36.5 kHz hsync
      Modeline "640x480" 31.5 640 680 720 864 480 488 491 521
      # 640x480 @ 75 Hz, 37.50 kHz hsync
      ModeLine "640x480" 31.5 640 656 720 840 480 481 484 500 -HSync -VSync
      # 800x600 @ 60 Hz, 37.8 kHz hsync
      Modeline "800x600" 40 800 840 968 1056 600 601 605 628 +hsync +vsync

      # 640x480 @ 85 Hz, 43.27 kHz hsync
      Modeline "640x480" 36 640 696 752 832 480 481 484 509 -HSync -VSync
      # 1152x864 @ 89 Hz interlaced, 44 kHz hsync
      ModeLine "1152x864" 65 1152 1168 1384 1480 864 865 875 985 Interlace

      # 800x600 @ 72 Hz, 48.0 kHz hsync
      Modeline "800x600" 50 800 856 976 1040 600 637 643 666 +hsync +vsync
      # 1024x768 @ 60 Hz, 48.4 kHz hsync
      Modeline "1024x768" 65 1024 1032 1176 1344 768 771 777 806 -hsync -vsync

      # 640x480 @ 100 Hz, 53.01 kHz hsync
      Modeline "640x480" 45.8 640 672 768 864 480 488 494 530 -HSync -VSync
      # 1152x864 @ 60 Hz, 53.5 kHz hsync
      Modeline "1152x864" 89.9 1152 1216 1472 1680 864 868 876 892 -HSync -VSync
      # 800x600 @ 85 Hz, 55.84 kHz hsync
      Modeline "800x600" 60.75 800 864 928 1088 600 616 621 657 -HSync -VSync

      # 1024x768 @ 70 Hz, 56.5 kHz hsync
      Modeline "1024x768" 75 1024 1048 1184 1328 768 771 777 806 -hsync -vsync
      # 1280x1024 @ 87 Hz interlaced, 51 kHz hsync
      Modeline "1280x1024" 80 1280 1296 1512 1568 1024 1025 1037 1165 Interlace

      # 800x600 @ 100 Hz, 64.02 kHz hsync
      Modeline "800x600" 69.65 800 864 928 1088 600 604 610 640 -HSync -VSync
      # 1024x768 @ 76 Hz, 62.5 kHz hsync
      Modeline "1024x768" 85 1024 1032 1152 1360 768 784 787 823
      # 1152x864 @ 70 Hz, 62.4 kHz hsync
      Modeline "1152x864" 92 1152 1208 1368 1474 864 865 875 895
      # 1280x1024 @ 61 Hz, 64.2 kHz hsync
      Modeline "1280x1024" 110 1280 1328 1512 1712 1024 1025 1028 1054

      # 1024x768 @ 85 Hz, 70.24 kHz hsync
      Modeline "1024x768" 98.9 1024 1056 1216 1408 768 782 788 822 -HSync -VSync
      # 1152x864 @ 78 Hz, 70.8 kHz hsync
      Modeline "1152x864" 110 1152 1240 1324 1552 864 864 876 908

      # 1280x1024 @ 70 Hz, 74.59 kHz hsync
      Modeline "1280x1024" 126.5 1280 1312 1472 1696 1024 1032 1040 1068 -HSync -VSync
      # 1600x1200 @ 60Hz, 75.00 kHz hsync
      Modeline "1600x1200" 162 1600 1664 1856 2160 1200 1201 1204 1250 +HSync +VSync
      # 1152x864 @ 84 Hz, 76.0 kHz hsync
      Modeline "1152x864" 135 1152 1464 1592 1776 864 864 876 908

      # 1280x1024 @ 74 Hz, 78.85 kHz hsync
      Modeline "1280x1024" 135 1280 1312 1456 1712 1024 1027 1030 1064

      # 1024x768 @ 100Hz, 80.21 kHz hsync
      Modeline "1024x768" 115.5 1024 1056 1248 1440 768 771 781 802 -HSync -VSync
      # 1280x1024 @ 76 Hz, 81.13 kHz hsync
      Modeline "1280x1024" 135 1280 1312 1416 1664 1024 1027 1030 1064

      # 1600x1200 @ 70 Hz, 87.50 kHz hsync
      Modeline "1600x1200" 189 1600 1664 1856 2160 1200 1201 1204 1250 -HSync -VSync
      # 1152x864 @ 100 Hz, 89.62 kHz hsync
      Modeline "1152x864" 137.65 1152 1184 1312 1536 864 866 885 902 -HSync -VSync
      # 1280x1024 @ 85 Hz, 91.15 kHz hsync
      Modeline "1280x1024" 157.5 1280 1344 1504 1728 1024 1025 1028 1072 +HSync +VSync
      # 1600x1200 @ 75 Hz, 93.75 kHz hsync
      Modeline "1600x1200" 202.5 1600 1664 1856 2160 1200 1201 1204 1250 +HSync +VSync
      # 1600x1200 @ 85 Hz, 105.77 kHz hsync
      Modeline "1600x1200" 220 1600 1616 1808 2080 1200 1204 1207 1244 +HSync +VSync
      # 1280x1024 @ 100 Hz, 107.16 kHz hsync
      Modeline "1280x1024" 181.75 1280 1312 1440 1696 1024 1031 1046 1072 -HSync -VSync

      # 1800x1440 @ 64Hz, 96.15 kHz hsync
      ModeLine "1800X1440" 230 1800 1896 2088 2392 1440 1441 1444 1490 +HSync +VSync
      # 1800x1440 @ 70Hz, 104.52 kHz hsync
      ModeLine "1800X1440" 250 1800 1896 2088 2392 1440 1441 1444 1490 +HSync +VSync

      # 512x384 @ 78 Hz, 31.50 kHz hsync
      Modeline "512x384" 20.160 512 528 592 640 384 385 388 404 -HSync -VSync
      # 512x384 @ 85 Hz, 34.38 kHz hsync
      Modeline "512x384" 22 512 528 592 640 384 385 388 404 -HSync -VSync

      # Low-res Doublescan modes
      # If your chipset does not support doublescan, you get a 'squashed'
      # resolution like 320x400.

      # 320x200 @ 70 Hz, 31.5 kHz hsync, 8:5 aspect ratio
      Modeline "320x200" 12.588 320 336 384 400 200 204 205 225 Doublescan
      # 320x240 @ 60 Hz, 31.5 kHz hsync, 4:3 aspect ratio
      Modeline "320x240" 12.588 320 336 384 400 240 245 246 262 Doublescan
      # 320x240 @ 72 Hz, 36.5 kHz hsync
      Modeline "320x240" 15.750 320 336 384 400 240 244 246 262 Doublescan
      # 400x300 @ 56 Hz, 35.2 kHz hsync, 4:3 aspect ratio
      ModeLine "400x300" 18 400 416 448 512 300 301 302 312 Doublescan
      # 400x300 @ 60 Hz, 37.8 kHz hsync
      Modeline "400x300" 20 400 416 480 528 300 301 303 314 Doublescan
      # 400x300 @ 72 Hz, 48.0 kHz hsync
      Modeline "400x300" 25 400 424 488 520 300 319 322 333 Doublescan
      # 480x300 @ 56 Hz, 35.2 kHz hsync, 8:5 aspect ratio
      ModeLine "480x300" 21.656 480 496 536 616 300 301 302 312 Doublescan
      # 480x300 @ 60 Hz, 37.8 kHz hsync
      Modeline "480x300" 23.890 480 496 576 632 300 301 303 314 Doublescan
      # 480x300 @ 63 Hz, 39.6 kHz hsync
      Modeline "480x300" 25 480 496 576 632 300 301 303 314 Doublescan
      # 480x300 @ 72 Hz, 48.0 kHz hsync
      Modeline "480x300" 29.952 480 504 584 624 300 319 322 333 Doublescan

      EndSection


      # **********************************************************************
      # Graphics device section
      # **********************************************************************

      # Any number of graphics device sections may be present

      Section "Device"
      Identifier "Generic VGA"
      VendorName "Unknown"
      BoardName "Unknown"
      Chipset "generic"

      # VideoRam 256

      # Clocks 25.2 28.3

      EndSection

      # Device configured by Xconfigurator:

      Section "Device"
      Identifier "My Video Card"
      VendorName "Unknown"
      BoardName "Unknown"
      #VideoRam 8192
      # Insert Clocks lines here if appropriate
      EndSection


      # **********************************************************************
      # Screen sections
      # **********************************************************************

      # The Colour SVGA server

      Section "Screen"
      Driver "svga"
      Device "Generic VGA"
      #Device "My Video Card"
      Monitor "LCD Panel 1024x768"
      Subsection "Display"
      Depth 8
      #Modes (null)
      ViewPort 0 0
      EndSubsection
      EndSection

      # The 16-color VGA server

      Section "Screen"
      Driver "vga16"
      Device "Generic VGA"
      Monitor "LCD Panel 1024x768"
      Subsection "Display"
      Modes "640x480" "800x600"
      ViewPort 0 0
      EndSubsection
      EndSection

      # The Mono server

      Section "Screen"
      Driver "vga2"
      Device "Generic VGA"
      Monitor "LCD Panel 1024x768"
      Subsection "Display"
      Modes "640x480" "800x600"
      ViewPort 0 0
      EndSubsection
      EndSection

      # The accelerated servers (S3, Mach32, Mach8, 8514, P9000, AGX, W32, Mach64
      # I128, and S3V)
      Section "Screen"
      Driver "accel"
      Device "My Video Card"
      Monitor "LCD Panel 1024x768"
      Subsection "Display"
      Depth 32
      Modes "1024x768"
      ViewPort 0 0
      EndSubsection
      EndSection


      ---------------------------------------------------------------------
      Tony Molloy. e-mail: tony.molloy@...
      Systems Manager.
      Dept. of CSIS. Phone: +353-61-202778 (DL)
      Univ. of Limerick. +353-61-333644 ext. 2778
      Ireland. Fax: +353-61-202734
      ---------------------------------------------------------------------
    Your message has been successfully submitted and would be delivered to recipients shortly.