Loading ...
Sorry, an error occurred while loading the content.

Re: Partitioning issues

Expand Messages
  • jan.glaescher@gmx.net
    OK, I found a way that works for me and I want to supply this information for those who encounter similar problems ... A reordering of partitions can be
    Message 1 of 8 , Sep 1, 2001
    • 0 Attachment
      OK, I found a way that works for me and I want to supply this
      information for those who encounter similar problems ...

      A reordering of partitions can be accomplished through Linux's fdisk
      (expert mode, "fix order of partition table"). This operation simply
      reorders the partitions according to their position on the disk. It
      preserves all partition boundaries. (This could not be accomplished
      through deletition and recreation of partitions, as I mentioned in the
      original posting)

      So to summarize the procedure:

      Problem: Windows occupies the only partition on the disk and you want
      to have your hibernation partition as /dev/hda1 starting cyl1.

      (1) Scan your disk and defrag the Windown partition. Then resize it
      as desired and create some space in front of it (This new slot which
      starts at cyl1 will later contain the hibernation partition; the size
      should be RAM+VideoRAM+some extra (4MB).

      (2) Create a temporary FAT32 partition with all the space BEHIND the
      Windows partition. This forces phdisk to put its hibernation
      partition in the slot at the beginning of the disk

      (3) Use the appropriate tool to create the hibernation partition
      (phdisk seem to work with the i8.1k)

      (4) Delete the temporary FAT32 partition. Now you should have your
      Windows partition as /dev/hda1 and your hibernation partition as
      /dev/hda2 and a large chunk of unallocated space behind the Windows
      partition.

      (5) Boot into Linux (I used SuSE's rescue system) and change the order
      of the partitions via Linux's fdisk (expert mode, command "f"). Now
      you should have your hibernation partition as /dev/hda1 staring cyl1
      and your Windows partition as /dev/hda2 right behind it, just where
      they should be according to Steve's FAQ. Be sure to keep the active
      flag on the Windows partition.

      (6) Check that Windows is still able to boot and go about installing
      Linux.



      Thanks for the quick replies last night.
      Jan







      --- In linux-dell-laptops@y..., jan.glaescher@g... wrote:
      > Hi all,
      >
      > I just got a new i8100 --- great machine as it seems on the first
      > glance. Now I am down to partitioning the drive and I need some
      help
      > ...
      >
      > I used Partition Magic 7 to change the WinME partition and moved it
      > back a little bit to create some space for an S2D partition as
      > /dev/hda1 as it was strongy recommend in the brilliant FAQ by Steve
      > (Thanks very much for putting all that information together!!!)
      >
      > I decided to use PM7 despite all the objections that have been
      around
      > because to me it seems that fips only creates new partitions at the
      > back of an existing one and is also not able to move partitions
      > around.
      >
      > However, as I already have a WinME partition which is /dev/hda1 (or
      > drive C:) I used the PHDISK utility by DELL to create an S2D
      partition
      > as /dev/hda4.
      >
      > (It first created it at the very far end of the disk, but I forced
      it
      > into the slot at that I reserved for the S2D partition at the
      > beginning ot the disk by temporarily creating a FAT32 partition with
      > the rest of the disk --- the PHDISK wil put it's partition in the
      > remaining slot)
      >
      > Now the question:
      > -----------------
      > Does anyone in the group know, how to change the order of the
      > partitions (or drive letters repsectively)?
      >
      > Here is what I came up with:
      >
      > (1) I could format the S2D partition temporarily as FAT32 (which is
      > then assigned the letter D:) and use PM7's drive mapper to remap C:
      to
      > D: and vice versa. Then, use Linux fdisk to change the type of the
      > S2D partition type back to a0 (IBM Thinkpad hibernation). Does
      > anybody have experience with this? Will WinME be still able to
      boot?
      > (Because I am trying to avoid all the hassles of reinstalling WinME
      > again)
      >
      > (2) I could write down the partition boundaries ofthe WinME
      partition
      > and then delete it with Linux fdisk (so that there is NO partition
      > left on the drive). Then create the S2D partition first
      (=/dev/hda1)
      > with the type a0 and then in a second step recreate the WinME
      > partition with the same boundaries as before (=/dev/hda2 now).
      Again
      > the question: Does anybody have experience with this, especially if
      > booting WinME is still possible after the deletion and recreation of
      > Fat32 (LBA) partition?
      >
      > Thanks or your suggestions,
      > Jan
    • jan.glaescher@gmx.net
      OK, I found a way that works for me and I want to supply this information for those who encounter similar problems ... A reordering of partitions can be
      Message 2 of 8 , Sep 1, 2001
      • 0 Attachment
        OK, I found a way that works for me and I want to supply this
        information for those who encounter similar problems ...

        A reordering of partitions can be accomplished through Linux's fdisk
        (expert mode, "fix order of partition table"). This operation simply
        reorders the partitions according to their position on the disk. It
        preserves all partition boundaries. (This could not be accomplished
        through deletition and recreation of partitions, as I
        mentioned in the original posting)

        So to summarize the procedure:

        Problem: Windows occupies the only partition on the disk and you want
        to have your hibernation partition as /dev/hda1 starting cyl1.

        (1) Scan your disk and defrag the Windown partition. Then resize it
        as desired and create some space in front of it (This new slot which
        starts at cyl1 will later contain the hibernation partition; the size
        should be RAM+VideoRAM+some extra (4MB).

        (2) Create a temporary FAT32 partition with all the space BEHIND the
        Windows partition. This forces phdisk to put its hibernation
        partition in the slot at the beginning of the disk

        (3) Use the appropriate tool to create the hibernation partition
        (phdisk seem to work with the i8.1k)

        (4) Delete the temporary FAT32 partition. Now you should have your
        Windows partition as /dev/hda1 and your hibernation partition as
        /dev/hda2 and a large chunk of unallocated space behind the Windows
        partition.

        (5) Boot into Linux (I used SuSE's rescue system) and change the order
        of the partitions via Linux's fdisk (expert mode, command "f"). Now
        you should have your hibernation partition as /dev/hda1 staring cyl1
        and your Windows partition as /dev/hda2 right behind it, just where
        they should be according to Steve's FAQ. Be sure to keep the active
        flag on the Windows partition.

        (6) Check that Windows is still able to boot and go about installing
        Linux.



        Thanks for the quick replies last night.
        Jan

        --- In linux-dell-laptops@y..., jan.glaescher@g... wrote:
        > Hi all,
        >
        > I just got a new i8100 --- great machine as it seems on the first
        > glance. Now I am down to partitioning the drive and I need some
        help
        > ...
        >
        > I used Partition Magic 7 to change the WinME partition and moved it
        > back a little bit to create some space for an S2D partition as
        > /dev/hda1 as it was strongy recommend in the brilliant FAQ by Steve
        > (Thanks very much for putting all that information together!!!)
        >
        > I decided to use PM7 despite all the objections that have been
        around
        > because to me it seems that fips only creates new partitions at the
        > back of an existing one and is also not able to move partitions
        > around.
        >
        > However, as I already have a WinME partition which is /dev/hda1 (or
        > drive C:) I used the PHDISK utility by DELL to create an S2D
        partition
        > as /dev/hda4.
        >
        > (It first created it at the very far end of the disk, but I forced
        it
        > into the slot at that I reserved for the S2D partition at the
        > beginning ot the disk by temporarily creating a FAT32 partition with
        > the rest of the disk --- the PHDISK wil put it's partition in the
        > remaining slot)
        >
        > Now the question:
        > -----------------
        > Does anyone in the group know, how to change the order of the
        > partitions (or drive letters repsectively)?
        >
        > Here is what I came up with:
        >
        > (1) I could format the S2D partition temporarily as FAT32 (which is
        > then assigned the letter D:) and use PM7's drive mapper to remap C:
        to
        > D: and vice versa. Then, use Linux fdisk to change the type of the
        > S2D partition type back to a0 (IBM Thinkpad hibernation). Does
        > anybody have experience with this? Will WinME be still able to
        boot?
        > (Because I am trying to avoid all the hassles of reinstalling WinME
        > again)
        >
        > (2) I could write down the partition boundaries ofthe WinME
        partition
        > and then delete it with Linux fdisk (so that there is NO partition
        > left on the drive). Then create the S2D partition first
        (=/dev/hda1)
        > with the type a0 and then in a second step recreate the WinME
        > partition with the same boundaries as before (=/dev/hda2 now).
        Again
        > the question: Does anybody have experience with this, especially if
        > booting WinME is still possible after the deletion and recreation of
        > Fat32 (LBA) partition?
        >
        > Thanks or your suggestions,
        > Jan
      • Raymond Laia
        jan.glaescher@gmx.net wrote: However, as I already have a WinME partition which is /dev/hda1 (or drive C:) I used the PHDISK utility by DELL to create
        Message 3 of 8 , Sep 1, 2001
        • 0 Attachment
          jan.glaescher@... wrote:
          >
          > However, as I already have a WinME partition which is /dev/hda1 (or
          > drive C:) I used the PHDISK utility by DELL to create an S2D partition
          > as /dev/hda4.

          Hallo Jan,
          I don't know wether I8100 has another spec as I8000. But DELL says
          (http://supprot.dell.com) the utility you need for I8000 is D5788807.exe
          and not phdisk as you wrote!!! This utility creates a boot disk, which
          creates s2d partition on your harddisk. I used it successfully.

          The steps I did:

          1. Create s2d disk from the utility above.
          2. Delete all partitions
          3. Boot from s2d disk and create s2d partition
          4. Boot a linux boot disk and create further partitions with linux fdisk
          5. Done

          The order I have:

          /dev/hda1 s2d (hidden c:)
          /dev/hda2 Windows ME
          /dev/hda5 swap
          /dev/hda6 /
          /dev/hda7 /home


          Raymond Laia
          slaia@...
          http://www.geocities.com/slaia


          _________________________________________________________
          Do You Yahoo!?
          Get your free @... address at http://mail.yahoo.com
        • rosehr@epost.de
          Hi Jan, I just got an Inspiron 8100, too, and I wonder wether you were successful with the repartitioning. Could you still do suspend to disc from windows? I
          Message 4 of 8 , Sep 11, 2001
          • 0 Attachment
            Hi Jan,

            I just got an Inspiron 8100, too, and I wonder wether you were
            successful with the repartitioning. Could you still do suspend to disc
            from windows?

            I would like to learn how the whole process works, and you mention a
            FAQ by Steve. Where can I find it?

            One thing in particular I don't understand is the following: Why does
            a second partion have to be created, if there is only one on my I8K1
            as I got it from Dell. (at least with fdisk I can only find one.)
            Nils

            --- In linux-dell-laptops@y..., jan.glaescher@g... wrote:
            > OK, I found a way that works for me and I want to supply this
            > information for those who encounter similar problems ...
            >
            > A reordering of partitions can be accomplished through Linux's fdisk
            > (expert mode, "fix order of partition table"). This operation
            simply
            > reorders the partitions according to their position on the disk. It
            > preserves all partition boundaries. (This could not be accomplished
            > through deletition and recreation of partitions, as I
            > mentioned in the original posting)
            >
            > So to summarize the procedure:
            >
            > Problem: Windows occupies the only partition on the disk and you
            want
            > to have your hibernation partition as /dev/hda1 starting cyl1.
            >
            > (1) Scan your disk and defrag the Windown partition. Then resize it
            > as desired and create some space in front of it (This new slot which
            > starts at cyl1 will later contain the hibernation partition; the
            size
            > should be RAM+VideoRAM+some extra (4MB).
            >
            > (2) Create a temporary FAT32 partition with all the space BEHIND the
            > Windows partition. This forces phdisk to put its hibernation
            > partition in the slot at the beginning of the disk
            >
            > (3) Use the appropriate tool to create the hibernation partition
            > (phdisk seem to work with the i8.1k)
            >
            > (4) Delete the temporary FAT32 partition. Now you should have your
            > Windows partition as /dev/hda1 and your hibernation partition as
            > /dev/hda2 and a large chunk of unallocated space behind the Windows
            > partition.
            >
            > (5) Boot into Linux (I used SuSE's rescue system) and change the
            order
            > of the partitions via Linux's fdisk (expert mode, command "f"). Now
            > you should have your hibernation partition as /dev/hda1 staring cyl1
            > and your Windows partition as /dev/hda2 right behind it, just where
            > they should be according to Steve's FAQ. Be sure to keep the active
            > flag on the Windows partition.
            >
            > (6) Check that Windows is still able to boot and go about installing
            > Linux.
            >
            >
            >
            > Thanks for the quick replies last night.
            > Jan
            >
            > --- In linux-dell-laptops@y..., jan.glaescher@g... wrote:
            > > Hi all,
            > >
            > > I just got a new i8100 --- great machine as it seems on the first
            > > glance. Now I am down to partitioning the drive and I need some
            > help
            > > ...
            > >
            > > I used Partition Magic 7 to change the WinME partition and moved
            it
            > > back a little bit to create some space for an S2D partition as
            > > /dev/hda1 as it was strongy recommend in the brilliant FAQ by
            Steve
            > > (Thanks very much for putting all that information together!!!)
            > >
            > > I decided to use PM7 despite all the objections that have been
            > around
            > > because to me it seems that fips only creates new partitions at
            the
            > > back of an existing one and is also not able to move partitions
            > > around.
            > >
            > > However, as I already have a WinME partition which is /dev/hda1
            (or
            > > drive C:) I used the PHDISK utility by DELL to create an S2D
            > partition
            > > as /dev/hda4.
            > >
            > > (It first created it at the very far end of the disk, but I forced
            > it
            > > into the slot at that I reserved for the S2D partition at the
            > > beginning ot the disk by temporarily creating a FAT32 partition
            with
            > > the rest of the disk --- the PHDISK wil put it's partition in the
            > > remaining slot)
            > >
            > > Now the question:
            > > -----------------
            > > Does anyone in the group know, how to change the order of the
            > > partitions (or drive letters repsectively)?
            > >
            > > Here is what I came up with:
            > >
            > > (1) I could format the S2D partition temporarily as FAT32 (which
            is
            > > then assigned the letter D:) and use PM7's drive mapper to remap
            C:
            > to
            > > D: and vice versa. Then, use Linux fdisk to change the type of
            the
            > > S2D partition type back to a0 (IBM Thinkpad hibernation). Does
            > > anybody have experience with this? Will WinME be still able to
            > boot?
            > > (Because I am trying to avoid all the hassles of reinstalling
            WinME
            > > again)
            > >
            > > (2) I could write down the partition boundaries ofthe WinME
            > partition
            > > and then delete it with Linux fdisk (so that there is NO partition
            > > left on the drive). Then create the S2D partition first
            > (=/dev/hda1)
            > > with the type a0 and then in a second step recreate the WinME
            > > partition with the same boundaries as before (=/dev/hda2 now).
            > Again
            > > the question: Does anybody have experience with this, especially
            if
            > > booting WinME is still possible after the deletion and recreation
            of
            > > Fat32 (LBA) partition?
            > >
            > > Thanks or your suggestions,
            > > Jan
          Your message has been successfully submitted and would be delivered to recipients shortly.