Loading ...
Sorry, an error occurred while loading the content.

Re: [linux-dell-laptops] kernel compile problem (Mandrake8 + 2.4.3)

Expand Messages
  • jsc3@havoc.gtf.org
    ... I would be surprised if this is required, particularly if you only use CardBus (32 bit) devices. Hopefully somebody can give a definitive answer. ... You
    Message 1 of 3 , Jul 5, 2001
    • 0 Attachment
      > Linux Dell Users:
      >
      > Questions 1-4 are not crucial, but I am curious about them. My big
      > question (and show-stopper) is number 5. That is the most important
      > to me.
      >
      > 1) Is ISA Plug-N-Play support needed for any reason in the kernel if
      > the kernel is to be used on a laptop? (Can a laptop have "ISA"
      > devices via pcmcia?)

      I would be surprised if this is required, particularly if you only
      use CardBus (32 bit) devices. Hopefully somebody can give a definitive
      answer.

      > 2) In the "IDE, ATA & ATAPI block devices" submenue of
      > the "ATA/IDE/MFM/RLL Support" menue, what devices can be disabled
      > when using the target kernel on a laptop?

      You surely should not need MFM or RLL support, those are ancient
      history.

      > 3) When 1394 FireWire support is compiled into the kernel;
      >
      > a) Can a boot floppy be built to boot the system from the 1394
      > FireWire HD?

      I seriously doubt it - I did not see any FireWire boot support in
      the BIOS.

      > b) Can such a 1394 HD device be accessed during boot time?
      > (Can a 1394 FW device hold lets say the /usr partition?)

      This may be possible, if Linux FireWire can get to that point.

      > c) If the system is up (say booting from an IDE HD), how does one
      > access a 1394 Firewire HD?

      I am not sure Linux FireWire is yet in the state that it can be
      used with FireWire HD reliably, which is a shame. Most of the
      development effort seems to be related to using cameras with it.

      Actually, I may be mistaken, it appears that last month when I was
      not looking somebody has uploaded an SBP-2 (the subset of SCSI used
      by FireWire storage) driver. I may have to try this out.

      In any event, I strongly advise patching your kernel with the latest
      and greatest from Source Forge before proceeding - what is in the
      stock kernels tends to not be up to date with the latest and greatest:

      http://linux1394.sourceforge.net/

      I am personally interested in IP over FireWire - it would make backing
      up to my home NFS server a bit faster - I find the FireWire to ATA
      bridge in my LaCie FireWire 60 GB drive to be slow - about 3 MB/sec
      under Windows ME. Since the actual drive is a Quantum FireBall+
      7200 RPM UATA100 drive, I think the bridge is the most likely
      problem. Newer bridges are alleged to be faster.

      > 4) Given the ".config" file below, I am interested in turning off ALL
      > kernel modules which are not needed for a laptop or I8000. Keep in
      > mind my laptop has a built in Intel network card (PCI). Can you
      > recommend more things to disable?
      > I would like the smallest kernel possible with regard to eliminating
      > excess crap to be compiled each time I make changes.

      Excellent idea. I am also interested in this.

      I will try to find time later to go through the list below and
      suggest things I am fairly certain should be eliminated (if I find
      any)

      > 5) kernel wont compile problem, see below:

      I don't have a quick answer for this one.


      --
      John Cronin
      mailto: `echo NjsOc3@... | sed 's/[NOSPAM]//g'`
    • Stephen Lau
      ... I ve had it turned off with no problems. ... Most of them really... :) All I have compiled in are: CONFIG_BLK_DEV_IDEDISK=y CONFIG_BLK_DEV_IDECS=m
      Message 2 of 3 , Jul 5, 2001
      • 0 Attachment
        On Thu, Jul 05, 2001 at 12:04:48PM -0000, stuart@... wrote:
        > 1) Is ISA Plug-N-Play support needed for any reason in the kernel if
        > the kernel is to be used on a laptop? (Can a laptop have "ISA"
        > devices via pcmcia?)

        I've had it turned off with no problems.

        > 2) In the "IDE, ATA & ATAPI block devices" submenue of
        > the "ATA/IDE/MFM/RLL Support" menue, what devices can be disabled
        > when using the target kernel on a laptop?

        Most of them really... :) All I have compiled in are:
        CONFIG_BLK_DEV_IDEDISK=y
        CONFIG_BLK_DEV_IDECS=m
        CONFIG_BLK_DEV_IDECD=y
        CONFIG_BLK_DEV_IDESCSI=m
        CONFIG_BLK_DEV_CMD640=y
        CONFIG_BLK_DEV_RZ1000=y
        CONFIG_BLK_DEV_IDEPCI=y
        CONFIG_IDEPCI_SHARE_IRQ=y
        CONFIG_BLK_DEV_IDEDMA_PCI=y
        CONFIG_IDEDMA_PCI_AUTO=y
        CONFIG_BLK_DEV_IDEDMA=y
        CONFIG_IDEDMA_AUTO=y
        CONFIG_BLK_DEV_IDE_MODES=y

        All others are unset.

        > 3) When 1394 FireWire support is compiled into the kernel;
        >
        > a) Can a boot floppy be built to boot the system from the 1394
        > FireWire HD?
        > b) Can such a 1394 HD device be accessed during boot time?
        > (Can a 1394 FW device hold lets say the /usr partition?)
        > c) If the system is up (say booting from an IDE HD), how does one
        > access a 1394 Firewire HD?

        Sorry, I don't know anything about this as I don't have firewire
        devices.

        > 4) Given the ".config" file below, I am interested in turning off ALL
        > kernel modules which are not needed for a laptop or I8000. Keep in
        > mind my laptop has a built in Intel network card (PCI). Can you
        > recommend more things to disable?
        > I would like the smallest kernel possible with regard to eliminating
        > excess crap to be compiled each time I make changes.
        >
        > 5) kernel wont compile problem, see below:
        >
        > Hardware: Dell Inspiron 8000 (laptop)
        > Software: Linux-Mandrake Kernel 2.4.3
        >
        > I have used the .config file shown below, and I do:
        >
        > make dep clean
        > make kernel bzImage install
        > make modules modules_install
        >
        > at the end of the "modules" part of the make, I get:
        >
        > find kernel -path '*/pcmcia/*' -name '*.o' | xargs -i -r ln -sf ../{}
        > pcmcia
        > if [ -r System.map ]; then /sbin/depmod -ae -F System.map 2.4.3-
        > 20mdk; fi
        > depmod: *** Unresolved symbols in /lib/modules/2.4.3-
        > 20mdk/pcmcia/ibmtr_cs.o.gz
        > depmod: unregister_trdev_Rf6781b40
        > depmod: tr_type_trans_Rb032b94d
        > depmod: init_trdev_Rcd39e743
        > depmod: register_trdev_R7a7d6684
        > depmod: *** Unresolved symbols in /lib/modules/2.4.3-
        > 20mdk/pcmcia/pcnet_cs.o.gz
        > depmod: ei_interrupt_Rb93d8fa5
        > depmod: ethdev_init_R73d305d7
        > depmod: ei_open_R09b5ea68
        > depmod: NS8390_init_Rbf8e26cf
        > [root@linux01 linux]#

        Aie... that looks strange. Have you tried grabbing the latest (2.4.6
        came out a day or two ago) and compiling thatone?

        -steve

        >
        > #
        > # Automatically generated make config: don't edit
        > #
        > CONFIG_X86=y
        > CONFIG_ISA=y
        > # CONFIG_SBUS is not set
        > CONFIG_UID16=y
        >
        > #
        > # Code maturity level options
        > #
        > CONFIG_EXPERIMENTAL=y
        >
        > #
        > # Loadable module support
        > #
        > CONFIG_MODULES=y
        > CONFIG_MODVERSIONS=y
        > CONFIG_KMOD=y
        >
        > #
        > # Processor type and features
        > #
        > # CONFIG_M386 is not set
        > # CONFIG_M486 is not set
        > # CONFIG_M586 is not set
        > # CONFIG_M586TSC is not set
        > # CONFIG_M586MMX is not set
        > # CONFIG_M686 is not set
        > CONFIG_MPENTIUMIII=y
        > # CONFIG_MPENTIUM4 is not set
        > # CONFIG_MK6 is not set
        > # CONFIG_MK7 is not set
        > # CONFIG_MCRUSOE is not set
        > # CONFIG_MWINCHIPC6 is not set
        > # CONFIG_MWINCHIP2 is not set
        > # CONFIG_MWINCHIP3D is not set
        > # CONFIG_MCYRIXIII is not set
        > CONFIG_X86_WP_WORKS_OK=y
        > CONFIG_X86_INVLPG=y
        > CONFIG_X86_CMPXCHG=y
        > CONFIG_X86_BSWAP=y
        > CONFIG_X86_POPAD_OK=y
        > CONFIG_X86_L1_CACHE_SHIFT=5
        > CONFIG_X86_TSC=y
        > CONFIG_X86_GOOD_APIC=y
        > # CONFIG_X86_PGE is not set
        > CONFIG_X86_USE_PPRO_CHECKSUM=y
        > # CONFIG_TOSHIBA is not set
        > CONFIG_MICROCODE=m
        > CONFIG_X86_MSR=m
        > CONFIG_X86_CPUID=m
        > CONFIG_E820_PROC=y
        > CONFIG_NOHIGHMEM=y
        > # CONFIG_HIGHMEM4G is not set
        > # CONFIG_HIGHMEM64G is not set
        > # CONFIG_MATH_EMULATION is not set
        > CONFIG_MTRR=y
        > # CONFIG_SMP is not set
        > # CONFIG_X86_UP_APIC is not set
        >
        > #
        > # General setup
        > #
        > CONFIG_NET=y
        > # CONFIG_VISWS is not set
        > CONFIG_PCI=y
        > # CONFIG_PCI_GOBIOS is not set
        > # CONFIG_PCI_GODIRECT is not set
        > CONFIG_PCI_GOANY=y
        > CONFIG_PCI_BIOS=y
        > CONFIG_PCI_DIRECT=y
        > CONFIG_PCI_NAMES=y
        > # CONFIG_EISA is not set
        > # CONFIG_MCA is not set
        > CONFIG_HOTPLUG=y
        >
        > #
        > # PCMCIA/CardBus support
        > #
        > CONFIG_PCMCIA=m
        > CONFIG_CARDBUS=y
        > CONFIG_I82365=y
        > CONFIG_TCIC=y
        > CONFIG_SYSVIPC=y
        > CONFIG_BSD_PROCESS_ACCT=y
        > CONFIG_SYSCTL=y
        > CONFIG_KCORE_ELF=y
        > # CONFIG_KCORE_AOUT is not set
        > CONFIG_BINFMT_AOUT=m
        > CONFIG_BINFMT_ELF=y
        > CONFIG_BINFMT_MISC=m
        > CONFIG_PM=y
        > # CONFIG_ACPI is not set
        > CONFIG_APM=y
        > # CONFIG_APM_IGNORE_USER_SUSPEND is not set
        > CONFIG_APM_DO_ENABLE=y
        > CONFIG_APM_CPU_IDLE=y
        > # CONFIG_APM_DISPLAY_BLANK is not set
        > CONFIG_APM_RTC_IS_GMT=y
        > # CONFIG_APM_ALLOW_INTS is not set
        >
        > #
        > # Memory Technology Devices (MTD)
        > #
        > # CONFIG_MTD is not set
        >
        > #
        > # Parallel port support
        > #
        > CONFIG_PARPORT=m
        > CONFIG_PARPORT_PC=m
        > CONFIG_PARPORT_PC_FIFO=y
        > CONFIG_PARPORT_PC_SUPERIO=y
        > # CONFIG_PARPORT_PC_PCMCIA is not set
        > # CONFIG_PARPORT_AMIGA is not set
        > # CONFIG_PARPORT_MFC3 is not set
        > # CONFIG_PARPORT_ATARI is not set
        > # CONFIG_PARPORT_GSC is not set
        > # CONFIG_PARPORT_SUNBPP is not set
        > CONFIG_PARPORT_OTHER=y
        > CONFIG_PARPORT_1284=y
        >
        > #
        > # Plug and Play configuration
        > #
        > CONFIG_PNP=y
        > CONFIG_ISAPNP=y
        >
        > #
        > # Block devices
        > #
        > CONFIG_BLK_DEV_FD=m
        > # CONFIG_BLK_DEV_XD is not set
        > CONFIG_PARIDE=m
        > CONFIG_PARIDE_PARPORT=m
        >
        > #
        > # Parallel IDE high-level drivers
        > #
        > CONFIG_PARIDE_PD=m
        > CONFIG_PARIDE_PCD=m
        > CONFIG_PARIDE_PF=m
        > CONFIG_PARIDE_PT=m
        > CONFIG_PARIDE_PG=m
        >
        > #
        > # Parallel IDE protocol modules
        > #
        > CONFIG_PARIDE_ATEN=m
        > CONFIG_PARIDE_BPCK=m
        > CONFIG_PARIDE_BPCK6=m
        > CONFIG_PARIDE_COMM=m
        > CONFIG_PARIDE_DSTR=m
        > CONFIG_PARIDE_FIT2=m
        > CONFIG_PARIDE_FIT3=m
        > CONFIG_PARIDE_EPAT=m
        > CONFIG_PARIDE_EPIA=m
        > CONFIG_PARIDE_FRIQ=m
        > CONFIG_PARIDE_FRPW=m
        > CONFIG_PARIDE_KBIC=m
        > CONFIG_PARIDE_KTTI=m
        > CONFIG_PARIDE_ON20=m
        > CONFIG_PARIDE_ON26=m
        > # CONFIG_BLK_CPQ_DA is not set
        > # CONFIG_BLK_CPQ_CISS_DA is not set
        > # CONFIG_BLK_DEV_DAC960 is not set
        > CONFIG_BLK_DEV_LOOP=m
        > CONFIG_BLK_DEV_NBD=m
        > CONFIG_BLK_DEV_RAM=y
        > CONFIG_BLK_DEV_RAM_SIZE=4096
        > CONFIG_BLK_DEV_INITRD=y
        >
        > #
        > # Multi-device support (RAID and LVM)
        > #
        > CONFIG_MD=y
        > CONFIG_BLK_DEV_MD=y
        > CONFIG_MD_LINEAR=m
        > CONFIG_MD_RAID0=m
        > CONFIG_MD_RAID1=m
        > CONFIG_MD_RAID5=m
        > CONFIG_MD_MULTIPATH=m
        > CONFIG_BLK_DEV_LVM=m
        >
        > #
        > # Networking options
        > #
        > CONFIG_PACKET=m
        > CONFIG_PACKET_MMAP=y
        > CONFIG_NETLINK=y
        > CONFIG_RTNETLINK=y
        > CONFIG_NETLINK_DEV=m
        > CONFIG_NETFILTER=y
        > # CONFIG_NETFILTER_DEBUG is not set
        > CONFIG_FILTER=y
        > CONFIG_UNIX=y
        > CONFIG_INET=y
        > CONFIG_IP_MULTICAST=y
        > CONFIG_IP_ADVANCED_ROUTER=y
        > CONFIG_RTNETLINK=y
        > CONFIG_NETLINK=y
        > # CONFIG_IP_MULTIPLE_TABLES is not set
        > # CONFIG_IP_ROUTE_MULTIPATH is not set
        > # CONFIG_IP_ROUTE_TOS is not set
        > # CONFIG_IP_ROUTE_VERBOSE is not set
        > # CONFIG_IP_ROUTE_LARGE_TABLES is not set
        > # CONFIG_IP_PNP is not set
        > CONFIG_NET_IPIP=m
        > CONFIG_NET_IPGRE=m
        > CONFIG_NET_IPGRE_BROADCAST=y
        > CONFIG_IP_MROUTE=y
        > CONFIG_IP_PIMSM_V1=y
        > CONFIG_IP_PIMSM_V2=y
        > # CONFIG_ARPD is not set
        > # CONFIG_INET_ECN is not set
        > # CONFIG_SYN_COOKIES is not set
        >
        > #
        > # IP: Netfilter Configuration
        > #
        > CONFIG_IP_NF_CONNTRACK=m
        > CONFIG_IP_NF_FTP=m
        > CONFIG_IP_NF_IRC=m
        > CONFIG_IP_NF_QUEUE=m
        > CONFIG_IP_NF_IPTABLES=m
        > CONFIG_IP_NF_MATCH_LIMIT=m
        > CONFIG_IP_NF_MATCH_MAC=m
        > CONFIG_IP_NF_MATCH_MARK=m
        > CONFIG_IP_NF_MATCH_MULTIPORT=m
        > CONFIG_IP_NF_MATCH_TOS=m
        > CONFIG_IP_NF_MATCH_TCPMSS=m
        > CONFIG_IP_NF_MATCH_STATE=m
        > CONFIG_IP_NF_MATCH_UNCLEAN=m
        > CONFIG_IP_NF_MATCH_OWNER=m
        > CONFIG_IP_NF_FILTER=m
        > CONFIG_IP_NF_TARGET_REJECT=m
        > CONFIG_IP_NF_TARGET_MIRROR=m
        > CONFIG_IP_NF_NAT=m
        > CONFIG_IP_NF_NAT_NEEDED=y
        > CONFIG_IP_NF_TARGET_MASQUERADE=m
        > CONFIG_IP_NF_TARGET_REDIRECT=m
        > CONFIG_IP_NF_NAT_IRC=m
        >
        > #
        > # IP_VS: IP Virtual Services support
        > #
        > CONFIG_IP_VS=m
        > CONFIG_IP_VS_LC=m
        > CONFIG_IP_VS_RR=m
        > CONFIG_IP_VS_WLC=m
        > CONFIG_IP_VS_WRR=m
        > CONFIG_IP_VS_LBLC=m
        > CONFIG_IP_VS_LBLCR=m
        > CONFIG_IP_VS_FTP=m
        > CONFIG_IP_NF_NAT_FTP=m
        > CONFIG_IP_NF_MANGLE=m
        > CONFIG_IP_NF_TARGET_TOS=m
        > CONFIG_IP_NF_TARGET_MARK=m
        > CONFIG_IP_NF_TARGET_LOG=m
        > CONFIG_IP_NF_TARGET_TCPMSS=m
        > CONFIG_IP_NF_COMPAT_IPCHAINS=m
        > CONFIG_IP_NF_NAT_NEEDED=y
        > CONFIG_IP_NF_COMPAT_IPFWADM=m
        > CONFIG_IP_NF_NAT_NEEDED=y
        > CONFIG_IPV6=m
        > CONFIG_IPV6_EUI64=y
        > CONFIG_IPV6_NO_PB=y
        >
        > #
        > # IPv6: Netfilter Configuration
        > #
        > CONFIG_IP6_NF_IPTABLES=m
        > CONFIG_IP6_NF_MATCH_LIMIT=m
        > CONFIG_IP6_NF_MATCH_MARK=m
        > CONFIG_IP6_NF_FILTER=m
        > CONFIG_IP6_NF_MANGLE=m
        > CONFIG_IP6_NF_TARGET_MARK=m
        > CONFIG_KHTTPD=m
        > # CONFIG_ATM is not set
        >
        > #
        > #
        > #
        > CONFIG_IPX=m
        > # CONFIG_IPX_INTERN is not set
        > CONFIG_ATALK=m
        > # CONFIG_DECNET is not set
        > CONFIG_BRIDGE=m
        > CONFIG_X25=m
        > CONFIG_LAPB=m
        > # CONFIG_LLC is not set
        > # CONFIG_NET_DIVERT is not set
        > CONFIG_IPSEC=m
        >
        > #
        > # IPSec options (FreeS/WAN)
        > #
        > CONFIG_IPSEC_IPIP=y
        > CONFIG_IPSEC_AH=y
        > CONFIG_IPSEC_AUTH_HMAC_MD5=y
        > CONFIG_IPSEC_AUTH_HMAC_SHA1=y
        > CONFIG_IPSEC_ESP=y
        > CONFIG_IPSEC_ENC_3DES=y
        > CONFIG_IPSEC_IPCOMP=y
        > # CONFIG_IPSEC_DEBUG is not set
        > # CONFIG_ECONET is not set
        > # CONFIG_WAN_ROUTER is not set
        > # CONFIG_NET_FASTROUTE is not set
        > # CONFIG_NET_HW_FLOWCONTROL is not set
        >
        > #
        > # QoS and/or fair queueing
        > #
        > CONFIG_NET_SCHED=y
        > CONFIG_NETLINK=y
        > CONFIG_RTNETLINK=y
        > CONFIG_NET_SCH_CBQ=m
        > CONFIG_NET_SCH_CSZ=m
        > CONFIG_NET_SCH_PRIO=m
        > CONFIG_NET_SCH_RED=m
        > CONFIG_NET_SCH_SFQ=m
        > CONFIG_NET_SCH_TEQL=m
        > CONFIG_NET_SCH_TBF=m
        > CONFIG_NET_SCH_GRED=m
        > CONFIG_NET_SCH_DSMARK=m
        > CONFIG_NET_SCH_INGRESS=m
        > CONFIG_NET_QOS=y
        > CONFIG_NET_ESTIMATOR=y
        > CONFIG_NET_CLS=y
        > CONFIG_NET_CLS_TCINDEX=m
        > CONFIG_NET_CLS_ROUTE4=m
        > CONFIG_NET_CLS_ROUTE=y
        > CONFIG_NET_CLS_FW=m
        > CONFIG_NET_CLS_U32=m
        > CONFIG_NET_CLS_RSVP=m
        > CONFIG_NET_CLS_RSVP6=m
        > CONFIG_NET_CLS_POLICE=y
        >
        > #
        > # Telephony Support
        > #
        > CONFIG_PHONE=m
        > CONFIG_PHONE_IXJ=m
        >
        > #
        > # ATA/IDE/MFM/RLL support
        > #
        > CONFIG_IDE=y
        >
        > #
        > # IDE, ATA and ATAPI Block devices
        > #
        > CONFIG_BLK_DEV_IDE=y
        >
        > #
        > # Please see Documentation/ide.txt for help/info on IDE drives
        > #
        > # CONFIG_BLK_DEV_HD_IDE is not set
        > # CONFIG_BLK_DEV_HD is not set
        > CONFIG_BLK_DEV_IDEDISK=y
        > # CONFIG_IDEDISK_MULTI_MODE is not set
        > # CONFIG_BLK_DEV_IDEDISK_VENDOR is not set
        > # CONFIG_BLK_DEV_COMMERIAL is not set
        > # CONFIG_BLK_DEV_IDECS is not set
        > CONFIG_BLK_DEV_IDECD=y
        > CONFIG_BLK_DEV_IDETAPE=m
        > CONFIG_BLK_DEV_IDEFLOPPY=y
        > CONFIG_BLK_DEV_IDESCSI=m
        >
        > #
        > # IDE chipset support/bugfixes
        > #
        > CONFIG_BLK_DEV_CMD640=y
        > CONFIG_BLK_DEV_CMD640_ENHANCED=y
        > CONFIG_BLK_DEV_ISAPNP=y
        > CONFIG_BLK_DEV_RZ1000=y
        > CONFIG_BLK_DEV_IDEPCI=y
        > CONFIG_IDEPCI_SHARE_IRQ=y
        > CONFIG_BLK_DEV_IDEDMA_PCI=y
        > CONFIG_BLK_DEV_OFFBOARD=y
        > CONFIG_IDEDMA_PCI_AUTO=y
        > CONFIG_BLK_DEV_IDEDMA=y
        > # CONFIG_IDEDMA_PCI_WIP is not set
        > CONFIG_BLK_DEV_AEC62XX=y
        > CONFIG_AEC62XX_TUNING=y
        > CONFIG_BLK_DEV_ALI15X3=y
        > CONFIG_WDC_ALI15X3=y
        > CONFIG_BLK_DEV_AMD7409=y
        > CONFIG_BLK_DEV_CMD64X=y
        > CONFIG_BLK_DEV_CY82C693=y
        > CONFIG_BLK_DEV_CS5530=y
        > CONFIG_BLK_DEV_HPT34X=y
        > CONFIG_BLK_DEV_HPT366=y
        > CONFIG_BLK_DEV_PIIX=y
        > # CONFIG_PIIX_TUNING is not set
        > CONFIG_BLK_DEV_NS87415=y
        > CONFIG_BLK_DEV_OPTI621=y
        > CONFIG_BLK_DEV_PDC202XX=y
        > CONFIG_PDC202XX_BURST=y
        > CONFIG_BLK_DEV_OSB4=y
        > CONFIG_BLK_DEV_SIS5513=y
        > CONFIG_BLK_DEV_SLC90E66=y
        > CONFIG_BLK_DEV_TRM290=y
        > CONFIG_BLK_DEV_VIA82CXXX=y
        > CONFIG_IDE_CHIPSETS=y
        >
        > #
        > # Note: most of these also require special kernel boot parameters
        > #
        > CONFIG_BLK_DEV_4DRIVES=y
        > CONFIG_BLK_DEV_ALI14XX=y
        > CONFIG_BLK_DEV_DTC2278=y
        > CONFIG_BLK_DEV_HT6560B=y
        > CONFIG_BLK_DEV_PDC4030=y
        > CONFIG_BLK_DEV_QD6580=y
        > CONFIG_BLK_DEV_UMC8672=y
        > CONFIG_IDEDMA_AUTO=y
        > CONFIG_IDEDMA_IVB=y
        > # CONFIG_DMA_NONPCI is not set
        > CONFIG_BLK_DEV_IDE_MODES=y
        >
        > #
        > # SCSI support
        > #
        > CONFIG_SCSI=m
        >
        > #
        > # SCSI support type (disk, tape, CD-ROM)
        > #
        > CONFIG_BLK_DEV_SD=m
        > CONFIG_SD_EXTRA_DEVS=40
        > CONFIG_CHR_DEV_ST=m
        > CONFIG_CHR_DEV_OSST=m
        > CONFIG_BLK_DEV_SR=m
        > CONFIG_BLK_DEV_SR_VENDOR=y
        > CONFIG_SR_EXTRA_DEVS=2
        > CONFIG_CHR_DEV_SG=m
        >
        > #
        > # Some SCSI devices (e.g. CD jukebox) support multiple LUNs
        > #
        > # CONFIG_SCSI_DEBUG_QUEUES is not set
        > # CONFIG_SCSI_MULTI_LUN is not set
        > CONFIG_SCSI_CONSTANTS=y
        > CONFIG_SCSI_LOGGING=y
        >
        > #
        > # SCSI low-level drivers
        > #
        > # CONFIG_BLK_DEV_3W_XXXX_RAID is not set
        > # CONFIG_SCSI_7000FASST is not set
        > # CONFIG_SCSI_ACARD is not set
        > # CONFIG_SCSI_AHA152X is not set
        > # CONFIG_SCSI_AHA1542 is not set
        > # CONFIG_SCSI_AHA1740 is not set
        > # CONFIG_SCSI_AACRAID is not set
        > # CONFIG_SCSI_AIC7XXX is not set
        > # CONFIG_SCSI_AIC7XXX_OLD is not set
        > # CONFIG_SCSI_DPT_I2O is not set
        > # CONFIG_SCSI_ADVANSYS is not set
        > # CONFIG_SCSI_IN2000 is not set
        > # CONFIG_SCSI_AM53C974 is not set
        > # CONFIG_SCSI_MEGARAID is not set
        > # CONFIG_SCSI_BUSLOGIC is not set
        > # CONFIG_SCSI_CPQFCTS is not set
        > # CONFIG_SCSI_DMX3191D is not set
        > # CONFIG_SCSI_DTC3280 is not set
        > # CONFIG_SCSI_EATA is not set
        > # CONFIG_SCSI_EATA_DMA is not set
        > # CONFIG_SCSI_EATA_PIO is not set
        > # CONFIG_SCSI_FUTURE_DOMAIN is not set
        > # CONFIG_SCSI_GDTH is not set
        > # CONFIG_SCSI_GENERIC_NCR5380 is not set
        > # CONFIG_SCSI_IPS is not set
        > # CONFIG_SCSI_INITIO is not set
        > # CONFIG_SCSI_INIA100 is not set
        > CONFIG_SCSI_PPA=m
        > CONFIG_SCSI_IMM=m
        > # CONFIG_SCSI_IZIP_EPP16 is not set
        > # CONFIG_SCSI_IZIP_SLOW_CTR is not set
        > # CONFIG_SCSI_NCR53C406A is not set
        > # CONFIG_SCSI_NCR53C7xx is not set
        > # CONFIG_SCSI_NCR53C8XX is not set
        > # CONFIG_SCSI_SYM53C8XX is not set
        > # CONFIG_SCSI_PAS16 is not set
        > # CONFIG_SCSI_PCI2000 is not set
        > # CONFIG_SCSI_PCI2220I is not set
        > # CONFIG_SCSI_PSI240I is not set
        > # CONFIG_SCSI_QLOGIC_FAS is not set
        > # CONFIG_SCSI_QLOGIC_ISP is not set
        > # CONFIG_SCSI_QLOGIC_FC is not set
        > # CONFIG_SCSI_QLOGIC_1280 is not set
        > # CONFIG_SCSI_QLOGIC_QLA2X00 is not set
        > # CONFIG_SCSI_SEAGATE is not set
        > # CONFIG_SCSI_SIM710 is not set
        > # CONFIG_SCSI_SYM53C416 is not set
        > # CONFIG_SCSI_DC395x_TRMS1040 is not set
        > # CONFIG_SCSI_DC390T is not set
        > # CONFIG_SCSI_T128 is not set
        > # CONFIG_SCSI_U14_34F is not set
        > # CONFIG_SCSI_ULTRASTOR is not set
        > # CONFIG_SCSI_DEBUG is not set
        >
        > #
        > # PCMCIA SCSI adapter support
        > #
        > CONFIG_SCSI_PCMCIA=y
        > CONFIG_PCMCIA_AHA152X=m
        > CONFIG_PCMCIA_APA1480=m
        > CONFIG_PCMCIA_FDOMAIN=m
        > CONFIG_PCMCIA_NINJA_SCSI=m
        > CONFIG_PCMCIA_QLOGIC=m
        > CONFIG_PCMCIA_SCSICARD=y
        >
        > #
        > # Fusion MPT device support
        > #
        > # CONFIG_FUSION is not set
        > # CONFIG_FUSION_BOOT is not set
        > # CONFIG_FUSION_ISENSE is not set
        > # CONFIG_FUSION_CTL is not set
        > # CONFIG_FUSION_LAN is not set
        >
        > #
        > # IEEE 1394 (FireWire) support
        > #
        > CONFIG_IEEE1394=m
        > CONFIG_FORCE_MODULE=m
        > # CONFIG_IEEE1394_PCILYNX is not set
        > CONFIG_IEEE1394_OHCI1394=m
        > CONFIG_IEEE1394_VIDEO1394=m
        > CONFIG_IEEE1394_RAWIO=m
        > CONFIG_IEEE1394_SBP2=m
        > # CONFIG_IEEE1394_VERBOSEDEBUG is not set
        >
        > #
        > # I2O device support
        > #
        > # CONFIG_I2O is not set
        >
        > #
        > # Network device support
        > #
        > CONFIG_NETDEVICES=y
        >
        > #
        > # ARCnet devices
        > #
        > # CONFIG_ARCNET is not set
        >
        > #
        > # Appletalk devices
        > #
        > CONFIG_APPLETALK=y
        > CONFIG_LTPC=m
        > CONFIG_COPS=m
        > CONFIG_COPS_DAYNA=y
        > CONFIG_COPS_TANGENT=y
        > CONFIG_IPDDP=m
        > CONFIG_IPDDP_ENCAP=y
        > CONFIG_IPDDP_DECAP=y
        > CONFIG_DUMMY=m
        > CONFIG_BONDING=m
        > CONFIG_EQUALIZER=m
        > CONFIG_TUN=m
        > CONFIG_ETHERTAP=m
        > CONFIG_NET_SB1000=m
        >
        > #
        > # Ethernet (10 or 100Mbit)
        > #
        > CONFIG_NET_ETHERNET=y
        > # CONFIG_NET_VENDOR_3COM is not set
        > # CONFIG_LANCE is not set
        > # CONFIG_NET_VENDOR_SMC is not set
        > # CONFIG_NET_VENDOR_RACAL is not set
        > # CONFIG_AT1700 is not set
        > # CONFIG_DEPCA is not set
        > # CONFIG_HP100 is not set
        > # CONFIG_NET_ISA is not set
        > CONFIG_NET_PCI=y
        > # CONFIG_PCNET32 is not set
        > # CONFIG_ADAPTEC_STARFIRE is not set
        > # CONFIG_AC3200 is not set
        > # CONFIG_APRICOT is not set
        > # CONFIG_CS89x0 is not set
        > # CONFIG_TULIP is not set
        > # CONFIG_DE4X5 is not set
        > # CONFIG_DGRS is not set
        > # CONFIG_DM9102 is not set
        > CONFIG_EEPRO100=m
        > # CONFIG_EEPRO100_PM is not set
        > CONFIG_E100=m
        > # CONFIG_NATSEMI is not set
        > # CONFIG_NE2K_PCI is not set
        > # CONFIG_8139TOO is not set
        > # CONFIG_SIS900 is not set
        > # CONFIG_EPIC100 is not set
        > # CONFIG_SUNDANCE is not set
        > # CONFIG_TLAN is not set
        > # CONFIG_VIA_RHINE is not set
        > # CONFIG_WINBOND_840 is not set
        > # CONFIG_HAPPYMEAL is not set
        > # CONFIG_NET_POCKET is not set
        >
        > #
        > # Ethernet (1000 Mbit)
        > #
        > # CONFIG_E1000 is not set
        > # CONFIG_ACENIC is not set
        > # CONFIG_HAMACHI is not set
        > # CONFIG_YELLOWFIN is not set
        > # CONFIG_SK98LIN is not set
        > # CONFIG_FDDI is not set
        > # CONFIG_HIPPI is not set
        > CONFIG_PLIP=m
        > CONFIG_PPP=m
        > CONFIG_PPP_MULTILINK=y
        > CONFIG_PPP_ASYNC=m
        > CONFIG_PPP_SYNC_TTY=m
        > CONFIG_PPP_DEFLATE=m
        > CONFIG_PPP_BSDCOMP=m
        > CONFIG_PPPOE=m
        > CONFIG_SLIP=m
        > CONFIG_SLIP_COMPRESSED=y
        > CONFIG_SLIP_SMART=y
        > CONFIG_SLIP_MODE_SLIP6=y
        >
        > #
        > # Wireless LAN (non-hamradio)
        > #
        > CONFIG_CIPE=m
        > CONFIG_NET_RADIO=y
        > CONFIG_STRIP=m
        > CONFIG_WAVELAN=m
        > CONFIG_ARLAN=m
        > CONFIG_AIRONET4500=m
        > CONFIG_AIRONET4500_NONCS=m
        > CONFIG_AIRONET4500_PNP=y
        > CONFIG_AIRONET4500_PCI=y
        > # CONFIG_AIRONET4500_ISA is not set
        > # CONFIG_AIRONET4500_I365 is not set
        > CONFIG_AIRONET4500_PROC=m
        >
        > #
        > # Token Ring devices
        > #
        > # CONFIG_TR is not set
        > # CONFIG_NET_FC is not set
        > # CONFIG_RCPCI is not set
        > CONFIG_SHAPER=m
        >
        > #
        > # Wan interfaces
        > #
        > # CONFIG_WAN is not set
        >
        > #
        > # PCMCIA network device support
        > #
        > CONFIG_NET_PCMCIA=y
        > CONFIG_PCMCIA_3C589=m
        > CONFIG_PCMCIA_3C574=m
        > # CONFIG_PCMCIA_FMVJ18X is not set
        > # CONFIG_PCMCIA_PCNET is not set
        > # CONFIG_PCMCIA_NMCLAN is not set
        > # CONFIG_PCMCIA_SMC91C92 is not set
        > # CONFIG_PCMCIA_XIRC2PS is not set
        > # CONFIG_PCMCIA_XIRCOM is not set
        > # CONFIG_PCMCIA_XIRTULIP is not set
        > CONFIG_NET_PCMCIA_RADIO=y
        > CONFIG_PCMCIA_RAYCS=m
        > CONFIG_PCMCIA_HERMES=m
        > CONFIG_PCMCIA_NETWAVE=m
        > CONFIG_PCMCIA_WAVELAN=m
        > CONFIG_AIRONET4500_CS=m
        > CONFIG_AIRONET4800_CS=m
        >
        > #
        > # Amateur Radio support
        > #
        > CONFIG_HAMRADIO=y
        >
        > #
        > # Packet Radio protocols
        > #
        > CONFIG_AX25=m
        > CONFIG_AX25_DAMA_SLAVE=y
        > CONFIG_NETROM=m
        > CONFIG_ROSE=m
        >
        > #
        > # AX.25 network device drivers
        > #
        >
        > #
        > # AX.25 network device drivers
        > #
        > CONFIG_MKISS=m
        > CONFIG_6PACK=m
        > CONFIG_BPQETHER=m
        > # CONFIG_DMASCC is not set
        > CONFIG_SCC=m
        > # CONFIG_SCC_DELAY is not set
        > # CONFIG_SCC_TRXECHO is not set
        > # CONFIG_BAYCOM_SER_FDX is not set
        > # CONFIG_BAYCOM_SER_HDX is not set
        > # CONFIG_BAYCOM_PAR is not set
        > # CONFIG_BAYCOM_EPP is not set
        > CONFIG_SOUNDMODEM=m
        > CONFIG_SOUNDMODEM_SBC=y
        > CONFIG_SOUNDMODEM_WSS=y
        > CONFIG_SOUNDMODEM_AFSK1200=y
        > CONFIG_SOUNDMODEM_AFSK2400_7=y
        > CONFIG_SOUNDMODEM_AFSK2400_8=y
        > CONFIG_SOUNDMODEM_AFSK2666=y
        > CONFIG_SOUNDMODEM_HAPN4800=y
        > CONFIG_SOUNDMODEM_PSK4800=y
        > CONFIG_SOUNDMODEM_FSK9600=y
        > # CONFIG_YAM is not set
        >
        > #
        > # IrDA (infrared) support
        > #
        > CONFIG_IRDA=m
        >
        > #
        > # IrDA protocols
        > #
        > CONFIG_IRLAN=m
        > CONFIG_IRNET=m
        > CONFIG_IRCOMM=m
        > CONFIG_IRDA_ULTRA=y
        > # CONFIG_IRDA_OPTIONS is not set
        >
        > #
        > # Infrared-port device drivers
        > #
        >
        > #
        > # SIR device drivers
        > #
        > CONFIG_IRTTY_SIR=m
        > CONFIG_IRPORT_SIR=m
        >
        > #
        > # Dongle support
        > #
        > CONFIG_DONGLE=y
        > CONFIG_ESI_DONGLE=m
        > CONFIG_ACTISYS_DONGLE=m
        > CONFIG_TEKRAM_DONGLE=m
        > CONFIG_GIRBIL_DONGLE=m
        > CONFIG_LITELINK_DONGLE=m
        > CONFIG_OLD_BELKIN_DONGLE=m
        >
        > #
        > # FIR device drivers
        > #
        > CONFIG_USB_IRDA=m
        > CONFIG_NSC_FIR=m
        > CONFIG_WINBOND_FIR=m
        > CONFIG_TOSHIBA_FIR=m
        > CONFIG_SMC_IRCC_FIR=m
        >
        > #
        > # ISDN subsystem
        > #
        > # CONFIG_ISDN is not set
        >
        > #
        > # Old CD-ROM drivers (not SCSI, not IDE)
        > #
        > # CONFIG_CD_NO_IDESCSI is not set
        >
        > #
        > # Input core support
        > #
        > CONFIG_INPUT=m
        > CONFIG_INPUT_KEYBDEV=m
        > CONFIG_INPUT_MOUSEDEV=m
        > CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
        > CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
        > CONFIG_INPUT_JOYDEV=m
        > CONFIG_INPUT_EVDEV=m
        >
        > #
        > # Character devices
        > #
        > CONFIG_VT=y
        > CONFIG_VT_CONSOLE=y
        > CONFIG_SERIAL=y
        > CONFIG_SERIAL_CONSOLE=y
        > CONFIG_SERIAL_EXTENDED=y
        > CONFIG_SERIAL_MANY_PORTS=y
        > CONFIG_SERIAL_SHARE_IRQ=y
        > # CONFIG_SERIAL_DETECT_IRQ is not set
        > # CONFIG_SERIAL_MULTIPORT is not set
        > # CONFIG_HUB6 is not set
        > # CONFIG_SERIAL_NONSTANDARD is not set
        > CONFIG_UNIX98_PTYS=y
        > CONFIG_UNIX98_PTY_COUNT=256
        > CONFIG_PRINTER=m
        > # CONFIG_LP_CONSOLE is not set
        > CONFIG_PPDEV=m
        >
        > #
        > # I2C support
        > #
        > CONFIG_I2C=m
        > CONFIG_I2C_ALGOBIT=m
        > CONFIG_I2C_PHILIPSPAR=m
        > CONFIG_I2C_ELV=m
        > CONFIG_I2C_VELLEMAN=m
        > CONFIG_I2C_ALGOPCF=m
        > CONFIG_I2C_ELEKTOR=m
        > CONFIG_I2C_MAINBOARD=y
        > CONFIG_I2C_ALI15X3=m
        > CONFIG_I2C_HYDRA=m
        > CONFIG_I2C_AMD756=m
        > CONFIG_I2C_I801=m
        > CONFIG_I2C_I810=m
        > CONFIG_I2C_PIIX4=m
        > CONFIG_I2C_VIA=m
        > CONFIG_I2C_VIAPRO=m
        > CONFIG_I2C_VOODOO=m
        > CONFIG_I2C_ISA=m
        > CONFIG_I2C_CHARDEV=m
        >
        > #
        > # Hardware sensors support
        > #
        > CONFIG_SENSORS=m
        > CONFIG_SENSORS_ADM1021=m
        > CONFIG_SENSORS_ADM1025=m
        > CONFIG_SENSORS_ADM9240=m
        > CONFIG_SENSORS_GL518SM=m
        > CONFIG_SENSORS_GL520SM=m
        > CONFIG_SENSORS_LM75=m
        > CONFIG_SENSORS_LM78=m
        > CONFIG_SENSORS_LM80=m
        > CONFIG_SENSORS_LM87=m
        > CONFIG_SENSORS_SIS5595=m
        > CONFIG_THMC50=m
        > CONFIG_SENSORS_VIA686A=m
        > CONFIG_SENSORS_W83781D=m
        > CONFIG_SENSORS_OTHER=y
        > CONFIG_SENSORS_BT869=m
        > CONFIG_SENSORS_DDCMON=m
        > CONFIG_SENSORS_EEPROM=m
        > CONFIG_SENSORS_LTC1710=m
        > CONFIG_SENSORS_MATORB=m
        >
        > #
        > # Mice
        > #
        > CONFIG_BUSMOUSE=m
        > CONFIG_ATIXL_BUSMOUSE=m
        > CONFIG_LOGIBUSMOUSE=m
        > CONFIG_MS_BUSMOUSE=m
        > CONFIG_MOUSE=m
        > CONFIG_PSMOUSE=y
        > CONFIG_82C710_MOUSE=m
        > CONFIG_PC110_PAD=m
        >
        > #
        > # Joysticks
        > #
        > CONFIG_JOYSTICK=y
        >
        > #
        > # Game port support
        > #
        > CONFIG_INPUT_NS558=m
        > CONFIG_INPUT_LIGHTNING=m
        > CONFIG_INPUT_PCIGAME=m
        > CONFIG_INPUT_CS461X=m
        >
        > #
        > # Gameport joysticks
        > #
        > CONFIG_INPUT_ANALOG=m
        > CONFIG_INPUT_A3D=m
        > CONFIG_INPUT_ADI=m
        > CONFIG_INPUT_COBRA=m
        > CONFIG_INPUT_GF2K=m
        > CONFIG_INPUT_GRIP=m
        > CONFIG_INPUT_INTERACT=m
        > CONFIG_INPUT_TMDC=m
        > CONFIG_INPUT_SIDEWINDER=m
        >
        > #
        > # Serial port support
        > #
        > CONFIG_INPUT_SERPORT=m
        >
        > #
        > # Serial port joysticks
        > #
        > CONFIG_INPUT_WARRIOR=m
        > CONFIG_INPUT_MAGELLAN=m
        > CONFIG_INPUT_SPACEORB=m
        > CONFIG_INPUT_SPACEBALL=m
        > CONFIG_INPUT_STINGER=m
        > CONFIG_INPUT_IFORCE_232=m
        > CONFIG_INPUT_IFORCE_USB=m
        >
        > #
        > # Parallel port joysticks
        > #
        > CONFIG_INPUT_DB9=m
        > CONFIG_INPUT_GAMECON=m
        > CONFIG_INPUT_TURBOGRAFX=m
        > CONFIG_QIC02_TAPE=m
        > CONFIG_QIC02_DYNCONF=y
        >
        > #
        > # Setting runtime QIC-02 configuration is done with qic02conf
        > #
        >
        > #
        > # from the tpqic02-support package. It is available at
        > #
        >
        > #
        > # metalab.unc.edu or ftp://titus.cfw.com/pub/Linux/util/
        > #
        >
        > #
        > # Watchdog Cards
        > #
        > CONFIG_WATCHDOG=y
        > # CONFIG_WATCHDOG_NOWAYOUT is not set
        > CONFIG_SOFT_WATCHDOG=m
        > CONFIG_WDT=m
        > CONFIG_WDTPCI=m
        > CONFIG_WDT_501=y
        > CONFIG_WDT_501_FAN=y
        > CONFIG_PCWATCHDOG=m
        > CONFIG_ACQUIRE_WDT=m
        > CONFIG_ADVANTECH_WDT=m
        > CONFIG_60XX_WDT=m
        > CONFIG_MIXCOMWD=m
        > CONFIG_I810_TCO=m
        > CONFIG_MACHZ_WDT=m
        > CONFIG_INTEL_RNG=m
        > CONFIG_NVRAM=m
        > CONFIG_RTC=m
        > CONFIG_DTLK=m
        > CONFIG_R3964=m
        > CONFIG_APPLICOM=m
        >
        > #
        > # Ftape, the floppy tape device driver
        > #
        > CONFIG_FTAPE=m
        > CONFIG_ZFTAPE=m
        > CONFIG_ZFT_DFLT_BLK_SZ=10240
        >
        > #
        > # The compressor will be built as a module only!
        > #
        > CONFIG_ZFT_COMPRESSOR=m
        > CONFIG_FT_NR_BUFFERS=3
        > CONFIG_FT_PROC_FS=y
        > CONFIG_FT_NORMAL_DEBUG=y
        > # CONFIG_FT_FULL_DEBUG is not set
        > # CONFIG_FT_NO_TRACE is not set
        > # CONFIG_FT_NO_TRACE_AT_ALL is not set
        >
        > #
        > # Hardware configuration
        > #
        > CONFIG_FT_STD_FDC=y
        > # CONFIG_FT_MACH2 is not set
        > # CONFIG_FT_PROBE_FC10 is not set
        > # CONFIG_FT_ALT_FDC is not set
        > CONFIG_FT_FDC_THR=8
        > CONFIG_FT_FDC_MAX_RATE=2000
        > CONFIG_FT_ALPHA_CLOCK=0
        > CONFIG_AGP=m
        > CONFIG_AGP_INTEL=y
        > CONFIG_AGP_I810=y
        > CONFIG_AGP_VIA=y
        > CONFIG_AGP_AMD=y
        > CONFIG_AGP_SIS=y
        > CONFIG_AGP_ALI=y
        > CONFIG_DRM=y
        > # CONFIG_DRM_TDFX is not set
        > # CONFIG_DRM_GAMMA is not set
        > CONFIG_DRM_R128=m
        > CONFIG_DRM_RADEON=m
        > # CONFIG_DRM_I810 is not set
        > # CONFIG_DRM_MGA is not set
        >
        > #
        > # PCMCIA character devices
        > #
        > CONFIG_PCMCIA_SERIAL_CS=m
        >
        > #
        > # Multimedia devices
        > #
        > # CONFIG_VIDEO_DEV is not set
        >
        > #
        > # File systems
        > #
        > CONFIG_QUOTA=y
        > CONFIG_AUTOFS_FS=m
        > CONFIG_AUTOFS4_FS=m
        > CONFIG_REISERFS_FS=m
        > # CONFIG_REISERFS_CHECK is not set
        > CONFIG_SUPERMOUNT=m
        > # CONFIG_ADFS_FS is not set
        > # CONFIG_AFFS_FS is not set
        > CONFIG_HFS_FS=m
        > CONFIG_BFS_FS=m
        > # CONFIG_CMS_FS is not set
        > CONFIG_FAT_FS=m
        > CONFIG_MSDOS_FS=m
        > CONFIG_UMSDOS_FS=m
        > CONFIG_VFAT_FS=m
        > CONFIG_EFS_FS=m
        > CONFIG_CRAMFS=m
        > # CONFIG_TMPFS is not set
        > CONFIG_RAMFS=m
        > CONFIG_ISO9660_FS=m
        > CONFIG_JOLIET=y
        > # CONFIG_MINIX_FS is not set
        > CONFIG_NTFS_FS=m
        > # CONFIG_NTFS_RW is not set
        > CONFIG_HPFS_FS=m
        > CONFIG_PROC_FS=y
        > # CONFIG_DEVFS_FS is not set
        > CONFIG_DEVPTS_FS=y
        > # CONFIG_QNX4FS_FS is not set
        > CONFIG_ROMFS_FS=m
        > CONFIG_EXT2_FS=y
        > CONFIG_SYSV_FS=m
        > # CONFIG_SYSV_FS_WRITE is not set
        > CONFIG_UDF_FS=m
        > # CONFIG_UDF_RW is not set
        > CONFIG_UFS_FS=m
        > # CONFIG_UFS_FS_WRITE is not set
        >
        > #
        > # Network File Systems
        > #
        > CONFIG_CODA_FS=m
        > CONFIG_NFS_FS=m
        > CONFIG_NFS_V3=y
        > CONFIG_NFSD=m
        > CONFIG_NFSD_V3=y
        > CONFIG_SUNRPC=m
        > CONFIG_LOCKD=m
        > CONFIG_LOCKD_V4=y
        > CONFIG_SMB_FS=m
        > CONFIG_SMB_NLS_DEFAULT=y
        > CONFIG_SMB_NLS_REMOTE="cp437"
        > CONFIG_NCP_FS=m
        > CONFIG_NCPFS_PACKET_SIGNING=y
        > # CONFIG_NCPFS_IOCTL_LOCKING is not set
        > CONFIG_NCPFS_STRONG=y
        > CONFIG_NCPFS_NFS_NS=y
        > CONFIG_NCPFS_OS2_NS=y
        > # CONFIG_NCPFS_SMALLDOS is not set
        > CONFIG_NCPFS_NLS=y
        > CONFIG_NCPFS_EXTRAS=y
        >
        > #
        > # Partition Types
        > #
        > CONFIG_PARTITION_ADVANCED=y
        > # CONFIG_ACORN_PARTITION is not set
        > # CONFIG_OSF_PARTITION is not set
        > # CONFIG_AMIGA_PARTITION is not set
        > # CONFIG_ATARI_PARTITION is not set
        > CONFIG_MAC_PARTITION=y
        > CONFIG_MSDOS_PARTITION=y
        > CONFIG_BSD_DISKLABEL=y
        > # CONFIG_MINIX_SUBPARTITION is not set
        > CONFIG_SOLARIS_X86_PARTITION=y
        > CONFIG_UNIXWARE_DISKLABEL=y
        > CONFIG_SGI_PARTITION=y
        > # CONFIG_ULTRIX_PARTITION is not set
        > CONFIG_SUN_PARTITION=y
        > CONFIG_SMB_NLS=y
        > CONFIG_NLS=y
        >
        > #
        > # Native Language Support
        > #
        > CONFIG_NLS_DEFAULT="iso8859-1"
        > CONFIG_NLS_CODEPAGE_437=m
        > CONFIG_NLS_CODEPAGE_737=m
        > CONFIG_NLS_CODEPAGE_775=m
        > CONFIG_NLS_CODEPAGE_850=m
        > CONFIG_NLS_CODEPAGE_852=m
        > CONFIG_NLS_CODEPAGE_855=m
        > CONFIG_NLS_CODEPAGE_857=m
        > CONFIG_NLS_CODEPAGE_860=m
        > CONFIG_NLS_CODEPAGE_861=m
        > CONFIG_NLS_CODEPAGE_862=m
        > CONFIG_NLS_CODEPAGE_863=m
        > CONFIG_NLS_CODEPAGE_864=m
        > CONFIG_NLS_CODEPAGE_865=m
        > CONFIG_NLS_CODEPAGE_866=m
        > CONFIG_NLS_CODEPAGE_869=m
        > CONFIG_NLS_CODEPAGE_936=m
        > CONFIG_NLS_CODEPAGE_950=m
        > CONFIG_NLS_CODEPAGE_932=m
        > CONFIG_NLS_CODEPAGE_949=m
        > CONFIG_NLS_CODEPAGE_874=m
        > CONFIG_NLS_ISO8859_8=m
        > CONFIG_NLS_CODEPAGE_1251=m
        > CONFIG_NLS_ISO8859_1=m
        > CONFIG_NLS_ISO8859_2=m
        > CONFIG_NLS_ISO8859_3=m
        > CONFIG_NLS_ISO8859_4=m
        > CONFIG_NLS_ISO8859_5=m
        > CONFIG_NLS_ISO8859_6=m
        > CONFIG_NLS_ISO8859_7=m
        > CONFIG_NLS_ISO8859_9=m
        > CONFIG_NLS_ISO8859_13=m
        > CONFIG_NLS_ISO8859_14=m
        > CONFIG_NLS_ISO8859_15=m
        > CONFIG_NLS_KOI8_R=m
        > CONFIG_NLS_KOI8_U=m
        > CONFIG_NLS_UTF8=m
        >
        > #
        > # Console drivers
        > #
        > CONFIG_VGA_CONSOLE=y
        > CONFIG_VIDEO_SELECT=y
        > CONFIG_MDA_CONSOLE=m
        >
        > #
        > # Frame-buffer support
        > #
        > CONFIG_FB=y
        > CONFIG_DUMMY_CONSOLE=y
        > # CONFIG_FB_RIVA is not set
        > # CONFIG_FB_CLGEN is not set
        > # CONFIG_FB_PM2 is not set
        > # CONFIG_FB_CYBER2000 is not set
        > CONFIG_FB_VESA=y
        > CONFIG_FB_VGA16=m
        > # CONFIG_FB_HGA is not set
        > CONFIG_VIDEO_SELECT=y
        > # CONFIG_FB_MATROX is not set
        > CONFIG_FB_ATY=m
        > CONFIG_FB_ATY_GX=y
        > CONFIG_FB_ATY_CT=y
        > CONFIG_FB_RADEON=m
        > CONFIG_FB_ATY128=m
        > # CONFIG_FB_SIS is not set
        > # CONFIG_FB_3DFX is not set
        > CONFIG_FB_VIRTUAL=m
        > CONFIG_FBCON_LOGO_BOOT=y
        > # CONFIG_FBCON_ADVANCED is not set
        > CONFIG_FBCON_MFB=m
        > CONFIG_FBCON_CFB2=m
        > CONFIG_FBCON_CFB4=m
        > CONFIG_FBCON_CFB8=y
        > CONFIG_FBCON_CFB16=y
        > CONFIG_FBCON_CFB24=y
        > CONFIG_FBCON_CFB32=y
        > CONFIG_FBCON_MAC=m
        > CONFIG_FBCON_VGA_PLANES=m
        > # CONFIG_FBCON_FONTWIDTH8_ONLY is not set
        > # CONFIG_FBCON_FONTS is not set
        > CONFIG_FONT_8x8=y
        > CONFIG_FONT_8x16=y
        >
        > #
        > # Sound
        > #
        > CONFIG_SOUND=m
        > # CONFIG_SOUND_CMPCI is not set
        > # CONFIG_SOUND_EMU10K1 is not set
        > # CONFIG_SOUND_FUSION is not set
        > # CONFIG_SOUND_CS4281 is not set
        > # CONFIG_SOUND_ES1370 is not set
        > # CONFIG_SOUND_ES1371 is not set
        > # CONFIG_SOUND_ESSSOLO1 is not set
        > # CONFIG_SOUND_MAESTRO is not set
        > CONFIG_SOUND_MAESTRO3=m
        > # CONFIG_SOUND_ICH is not set
        > # CONFIG_SOUND_SONICVIBES is not set
        > # CONFIG_SOUND_BT878 is not set
        > # CONFIG_SOUND_TRIDENT is not set
        > # CONFIG_SOUND_MSNDCLAS is not set
        > # CONFIG_SOUND_MSNDPIN is not set
        > # CONFIG_SOUND_VIA82CXXX is not set
        > # CONFIG_SOUND_OSS is not set
        > # CONFIG_SOUND_TVMIXER is not set
        >
        > #
        > # USB support
        > #
        > CONFIG_USB=m
        > # CONFIG_USB_DEBUG is not set
        >
        > #
        > # Miscellaneous USB options
        > #
        > CONFIG_USB_DEVICEFS=y
        > # CONFIG_USB_BANDWIDTH is not set
        >
        > #
        > # USB Controllers
        > #
        > CONFIG_USB_UHCI=m
        > CONFIG_USB_UHCI_ALT=m
        > CONFIG_USB_OHCI=m
        >
        > #
        > # USB Device Class drivers
        > #
        > CONFIG_USB_AUDIO=m
        > CONFIG_USB_BLUETOOTH=m
        > CONFIG_USB_STORAGE=m
        > # CONFIG_USB_STORAGE_DEBUG is not set
        > # CONFIG_USB_STORAGE_FREECOM is not set
        > CONFIG_USB_STORAGE_HP8200e=y
        > CONFIG_USB_ACM=m
        > CONFIG_USB_PRINTER=m
        >
        > #
        > # USB Human Interface Devices (HID)
        > #
        > CONFIG_USB_HID=m
        > CONFIG_USB_KBD=m
        > CONFIG_USB_MOUSE=m
        > CONFIG_USB_WACOM=m
        >
        > #
        > # USB Imaging devices
        > #
        > CONFIG_USB_DC2XX=m
        > CONFIG_USB_MDC800=m
        > CONFIG_USB_SCANNER=m
        > CONFIG_USB_MICROTEK=m
        > CONFIG_USB_HP5300=m
        >
        > #
        > # USB Multimedia devices
        > #
        > CONFIG_USB_DABUSB=m
        >
        > #
        > # USB Network adaptors
        > #
        > CONFIG_USB_PLUSB=m
        > CONFIG_USB_PEGASUS=m
        > CONFIG_USB_KAWETH=m
        > CONFIG_USB_CDCETHER=m
        > CONFIG_USB_USBNET=m
        >
        > #
        > # USB port drivers
        > #
        > CONFIG_USB_USS720=m
        >
        > #
        > # USB Serial Converter support
        > #
        > CONFIG_USB_SERIAL=m
        > # CONFIG_USB_SERIAL_DEBUG is not set
        > CONFIG_USB_SERIAL_GENERIC=y
        > CONFIG_USB_SERIAL_BELKIN=m
        > CONFIG_USB_SERIAL_WHITEHEAT=m
        > CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m
        > CONFIG_USB_SERIAL_EMPEG=m
        > CONFIG_USB_SERIAL_FTDI_SIO=m
        > CONFIG_USB_SERIAL_VISOR=m
        > CONFIG_USB_SERIAL_EDGEPORT=m
        > CONFIG_USB_SERIAL_KEYSPAN_PDA=m
        > CONFIG_USB_SERIAL_KEYSPAN=m
        > CONFIG_USB_SERIAL_KEYSPAN_USA28=y
        > CONFIG_USB_SERIAL_KEYSPAN_USA28X=y
        > CONFIG_USB_SERIAL_KEYSPAN_USA19=y
        > CONFIG_USB_SERIAL_KEYSPAN_USA18X=y
        > CONFIG_USB_SERIAL_KEYSPAN_USA19W=y
        > CONFIG_USB_SERIAL_KEYSPAN_USA49W=y
        > CONFIG_USB_SERIAL_MCT_U232=m
        > CONFIG_USB_SERIAL_OMNINET=m
        >
        > #
        > # USB misc drivers
        > #
        > CONFIG_USB_RIO500=m
        > CONFIG_USB_SPEEDTOUCH=m
        >
        > #
        > # Kernel hacking
        > #
        > CONFIG_DEBUG_KERNEL=y
        > # CONFIG_DEBUG_SLAB is not set
        > # CONFIG_DEBUG_IOVIRT is not set
        > CONFIG_MAGIC_SYSRQ=y
        > # CONFIG_DEBUG_SPINLOCK is not set
        > # CONFIG_DEBUG_BUGVERBOSE is not set
        >
        >
        >
        >
        >
        >
        > --------------------------------------------------------------
        > Please post your X config files in the group links or database
        > FAQ: http://www.whacked.net/ldl-faq
        >
        > Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
        >

        --
        stephen lau :: [slau@...] :: www.whacked.net :: ucsd/cse grad student
        "It is better to remain silent and be thought a fool than to open one's mouth and remove all doubt."
      Your message has been successfully submitted and would be delivered to recipients shortly.