- Hello- I have a Latitude r400gt with a cport II dock and 19 Dell m990 Monitor dual booting between Win 98 and Red Hat 6.1. I was able to get Xfree86 3.3.5Message 1 of 2 , Mar 2 1:24 PMView SourceHello-
I have a Latitude r400gt with a cport II dock and 19" Dell m990 Monitor
dual booting between Win 98 and Red Hat 6.1. I was able to get Xfree86
3.3.5 working fine on the LCD screen, and now am interested in pushing
the edge of the envelope further. I ultimately would like it to mirror
what the win 98 side does, uses the LCD out of the dock, and the
monitor when it is docked.
Here are my questions:
1. Is it possible to set X up to auto switch between the internal
display and the external display when undocked/docked? I am assuming
that this is a little above and beyond what X is capable of today, but
I am still a bit green as far as XF86 stuff goes. Anyone have a solid
2. In the event #1 is too difficult/not possible, does X support
multiple XF86Config files? Say one with "intern_disp" enabled and one
with the "extern_disp" enabled, and some sort of prompting/different
command line to choose between the two. In my tests, activating the
"intern_disp" and "extern_disp" worked well apart, but had problems
when placed together. When the Dell is docked, the lid is shut, having
the LCD on could cause damage.
3. What are the ranges that the lcd can handle on the horizontal sync
and Vertical refresh? I was using 31.5-48.5 on the horizontal and 60
for the refresh. The M990 monitor will handle a lot higher, but I want
to make sure that if I switch displays quickly in the XF86Config file,
I dont run the risk of damaging the LCD due to the monitor refresh
being cranked up.
Any Help is greatly appreciated. I would be glad to detail how I was
able to get X working if anyone is interested. (I figured it out off
this list and a few other places :-)
- Hello Ryan, I have a similar configuration to you, and suffered similar problems by the sound of it. In answer to your questions, here is what I haveMessage 2 of 2 , Mar 8 1:15 AMView SourceHello Ryan,
I have a similar configuration to you, and suffered similar problems
by the sound of it.
In answer to your questions, here is what I have uncovered:
1. I've not yet found a way to make X automatically switch, and haven't
found anyone else that has either. Setting both intern_disp and
disp has some interesting side effects, as you noted, and doesn't really
seem to work.
2. To make the swap automatic, I added lines to rc.local to test for
source another script during the bootup sequence.
This script moves the current XF86Config file out of the way, and then
does a test using ifconfig to see if eth0 is set up. This is defined
as the 3c905 interface on my docking station. If so, it copies
a file for the external monitor to XF86Config, and if not, copies over
the LCD definition. This gets around the multiple config files and
auto switching nicely.
3. I'm not too sure about this, as I defined my XF86Config files
Maybe you should think about writing another set of scripts to switch
over the XF86Config files and restart X for you.
I had plenty of fun getting the NeoMagic 256ZX working, and still have
occaisional glitches, so if you discover any more hints and tricks
way, I'm always grateful for more information. Most of the
I've used can be found on http://wkweb4.cableinet.co.uk/~khall/linux,
copies of the scripts I used for the autoswitch.