Loading ...
Sorry, an error occurred while loading the content.

[linux-dell-laptops] Dell Latitude CPi R-series 400Mhz 1024x768x16Bpp XF86Config

Expand Messages
  • Alan Harding
    # File generated by XConfigurator. # ********************************************************************** # Refer to the XF86Config(4/5) man page for details
    Message 1 of 3 , Feb 11, 2000
    • 0 Attachment
      # File generated by XConfigurator.

      # **********************************************************************
      # Refer to the XF86Config(4/5) man page for details about the format of
      # this file.
      # **********************************************************************

      # **********************************************************************
      # Files section. This allows default font and rgb paths to be set
      # **********************************************************************

      Section "Files"

      # The location of the RGB database. Note, this is the name of the
      # file minus the extension (like ".txt" or ".db"). There is normally
      # no need to change the default.

      RgbPath "/usr/X11R6/lib/X11/rgb"

      # Multiple FontPath entries are allowed (they are concatenated together)
      # By default, Red Hat 6.0 and later now use a font server independent of
      # the X server to render fonts.

      FontPath "unix/:-1"

      EndSection

      # **********************************************************************
      # Server flags section.
      # **********************************************************************

      Section "ServerFlags"

      # Uncomment this to cause a core dump at the spot where a signal is
      # received. This may leave the console in an unusable state, but may
      # provide a better stack trace in the core dump to aid in debugging
      #NoTrapSignals

      # Uncomment this to disable the <Crtl><Alt><BS> server abort sequence
      # This allows clients to receive this key event.
      #DontZap

      # Uncomment this to disable the <Crtl><Alt><KP_+>/<KP_-> mode switching
      # sequences. This allows clients to receive these key events.
      #DontZoom

      EndSection

      # **********************************************************************
      # Input devices
      # **********************************************************************

      # **********************************************************************
      # Keyboard section
      # **********************************************************************

      Section "Keyboard"

      Protocol "Standard"

      # when using XQUEUE, comment out the above line, and uncomment the
      # following line
      #Protocol "Xqueue"

      AutoRepeat 500 5

      # Let the server do the NumLock processing. This should only be
      # required when using pre-R6 clients
      #ServerNumLock

      # Specify which keyboard LEDs can be user-controlled (eg, with xset(1))
      Xleds 1 2 3

      #To set the LeftAlt to Meta, RightAlt key to ModeShift,
      #RightCtl key to Compose, and ScrollLock key to ModeLock:

      LeftAlt Meta
      RightAlt Meta
      ScrollLock Compose
      RightCtl Control

      # To disable the XKEYBOARD extension, uncomment XkbDisable.

      # XkbDisable

      # To customise the XKB settings to suit your keyboard, modify the
      # lines below (which are the defaults). For example, for a non-U.S.
      # keyboard, you will probably want to use:
      # XkbModel "pc102"
      # If you have a US Microsoft Natural keyboard, you can use:
      # XkbModel "microsoft"
      #
      # Then to change the language, change the Layout setting.
      # For example, a german layout can be obtained with:
      # XkbLayout "de"
      # or:
      # XkbLayout "de"
      # XkbVariant "nodeadkeys"
      #
      # If you'd like to switch the positions of your capslock and
      # control keys, use:
      # XkbOptions "ctrl:swapcaps"

      # These are the default XKB settings for XFree86
      # XkbRules "xfree86"
      # XkbModel "pc101"
      # XkbLayout "us"
      # XkbVariant ""
      # XkbOptions ""

      XkbKeycodes "xfree86"
      XkbTypes "default"
      XkbCompat "default"
      XkbSymbols "us(pc101)"
      XkbGeometry "pc"
      XkbRules "xfree86"
      XkbModel "pc104"
      XkbLayout "us"
      XkbOptions "ctrl:nocaps"
      EndSection

      # **********************************************************************
      # Pointer section
      # **********************************************************************

      Section "Pointer"
      Protocol "PS/2"
      Device "/dev/mouse"

      # When using XQUEUE, comment out the above two lines, and uncomment
      # the following line.

      # Protocol "Xqueue"

      # Baudrate and SampleRate are only for some Logitech mice

      BaudRate 1200
      # SampleRate 150

      # Emulate3Buttons is an option for 2-button Microsoft mice
      # Emulate3Timeout is the timeout in milliseconds (default is 50ms)

      Emulate3Buttons
      Emulate3Timeout 50
      Resolution 100

      # ChordMiddle is an option for some 3-button Logitech mice

      # ChordMiddle

      EndSection


      # **********************************************************************
      # Monitor section
      # **********************************************************************

      Section "Monitor"
      Identifier "Primary Monitor"
      VendorName "Dell"
      ModelName "CPt C400"
      HorizSync 31.5-48.5
      VertRefresh 55-90
      Modeline "1024x768" 65.00 1024 1032 1176 1344 768 771 777 806 -hsync -vsync
      EndSection

      Section "Device"
      Identifier "Primary Card"
      VendorName "Neomagic"
      BoardName "256ZX"
      VideoRam 4096
      Chipset "NM2200"
      EndSection

      Section "Screen"
      Driver "FBDev"
      Device "Primary Card"
      Monitor "Primary Monitor"
      #BlankTime 5
      #SuspendTime 15
      #OffTime 20
      SubSection "Display"
      Depth 16
      Modes "default"
      EndSubSection
      EndSection

      Section "Screen"
      Driver "SVGA"
      Device "Primary Card"
      Monitor "Primary Monitor"
      #DefaultColorDepth 24
      DefaultColorDepth 16
      BlankTime 5
      SuspendTime 15
      OffTime 20
      SubSection "Display"
      Depth 8
      Modes "1024x768"
      EndSubSection
      SubSection "Display"
      Depth 15
      Modes "1024x768"
      EndSubSection
      SubSection "Display"
      Depth 16
      Modes "1024x768"
      EndSubSection
      SubSection "Display"
      Depth 24
      Modes "1024x768"
      EndSubSection
      SubSection "Display"
      Depth 32
      Modes "1024x768"
      EndSubSection
      EndSection

      Section "Screen"
      Driver "VGA16"
      Device "Primary Card"
      Monitor "Primary Monitor"
      BlankTime 5
      SuspendTime 15
      OffTime 20
      SubSection "Display"
      Depth 4
      Modes "1024x768"
      EndSubSection
      EndSection

      Section "Screen"
      Driver "VGA2"
      Device "Primary Card"
      Monitor "Primary Monitor"
      BlankTime 5
      SuspendTime 15
      OffTime 20
      SubSection "Display"
      Depth 1
      Modes "1024x768"
      EndSubSection
      EndSection
      --
      ==================================================================
      Alan Harding Network Appliance UK Ltd
      Professional Services Engineer Unit 1160 Elliot Court
      Herald Avenue
      Tel:02476 718152 Coventry Business Park
      Fax:02476 713620 Coventry
      Mob:07715 539272 West Midlands CV5 6UB
      ==================================================================
    • Freddie
      Hi - I just wanted to clarify on if the specs on your laptop, Linux version/kernel, and video card match mine. I m still having problems with X starting up
      Message 2 of 3 , Mar 7, 2000
      • 0 Attachment
        Hi -

        I just wanted to clarify on if the specs on your laptop, Linux
        version/kernel,
        and video card match mine. I'm still having problems with X starting up
        when I tried using your settings...

        This is what I've got:
        Linux 6.0 (kernel 2.2.5-15 on an i686)
        Dell Latitude Cpi R-series
        NeoMagic 256ZX Video Card, 4MB

        Any suggestions?

        Thanks!

        alan harding <alan-@...> wrote:
        original article:http://www.egroups.com/group/linux-dell-laptops/?start
        =369
        > # File generated by XConfigurator.
        >
        > # *******************************************************************
        ***
        > # Refer to the XF86Config(4/5) man page for details about the format
        of
        > # this file.
        > # *******************************************************************
        ***
        >
        > # *******************************************************************
        ***
        > # Files section. This allows default font and rgb paths to be set
        > # *******************************************************************
        ***
        >
        > Section "Files"
        >
        > # The location of the RGB database. Note, this is the name of the
        > # file minus the extension (like ".txt" or ".db"). There is normally
        > # no need to change the default.
        >
        > RgbPath "/usr/X11R6/lib/X11/rgb"
        >
        > # Multiple FontPath entries are allowed (they are concatenated
        together)
        > # By default, Red Hat 6.0 and later now use a font server independent
        of
        > # the X server to render fonts.
        >
        > FontPath "unix/:-1"
        >
        > EndSection
        >
        > # *******************************************************************
        ***
        > # Server flags section.
        > # *******************************************************************
        ***
        >
        > Section "ServerFlags"
        >
        > # Uncomment this to cause a core dump at the spot where a signal
        is
        > # received. This may leave the console in an unusable state, but
        may
        > # provide a better stack trace in the core dump to aid in
        debugging
        > #NoTrapSignals
        >
        > # Uncomment this to disable the <Crtl><Alt><BS> server abort
        sequence
        > # This allows clients to receive this key event.
        > #DontZap
        >
        > # Uncomment this to disable the <Crtl><Alt><KP_+>/<KP_-> mode
        switching
        > # sequences. This allows clients to receive these key events.
        > #DontZoom
        >
        > EndSection
        >
        > # *******************************************************************
        ***
        > # Input devices
        > # *******************************************************************
        ***
        >
        > # *******************************************************************
        ***
        > # Keyboard section
        > # *******************************************************************
        ***
        >
        > Section "Keyboard"
        >
        > Protocol "Standard"
        >
        > # when using XQUEUE, comment out the above line, and uncomment the
        > # following line
        > #Protocol "Xqueue"
        >
        > AutoRepeat 500 5
        >
        > # Let the server do the NumLock processing. This should only be
        > # required when using pre-R6 clients
        > #ServerNumLock
        >
        > # Specify which keyboard LEDs can be user-controlled (eg, with
        xset(1))
        > Xleds 1 2 3
        >
        > #To set the LeftAlt to Meta, RightAlt key to ModeShift,
        > #RightCtl key to Compose, and ScrollLock key to ModeLock:
        >
        > LeftAlt Meta
        > RightAlt Meta
        > ScrollLock Compose
        > RightCtl Control
        >
        > # To disable the XKEYBOARD extension, uncomment XkbDisable.
        >
        > # XkbDisable
        >
        > # To customise the XKB settings to suit your keyboard, modify the
        > # lines below (which are the defaults). For example, for a non-U.S.
        > # keyboard, you will probably want to use:
        > # XkbModel "pc102"
        > # If you have a US Microsoft Natural keyboard, you can use:
        > # XkbModel "microsoft"
        > #
        > # Then to change the language, change the Layout setting.
        > # For example, a german layout can be obtained with:
        > # XkbLayout "de"
        > # or:
        > # XkbLayout "de"
        > # XkbVariant "nodeadkeys"
        > #
        > # If you'd like to switch the positions of your capslock and
        > # control keys, use:
        > # XkbOptions "ctrl:swapcaps"
        >
        > # These are the default XKB settings for XFree86
        > # XkbRules "xfree86"
        > # XkbModel "pc101"
        > # XkbLayout "us"
        > # XkbVariant ""
        > # XkbOptions ""
        >
        > XkbKeycodes "xfree86"
        > XkbTypes "default"
        > XkbCompat "default"
        > XkbSymbols "us(pc101)"
        > XkbGeometry "pc"
        > XkbRules "xfree86"
        > XkbModel "pc104"
        > XkbLayout "us"
        > XkbOptions "ctrl:nocaps"
        > EndSection
        >
        > # *******************************************************************
        ***
        > # Pointer section
        > # *******************************************************************
        ***
        >
        > Section "Pointer"
        > Protocol "PS/2"
        > Device "/dev/mouse"
        >
        > # When using XQUEUE, comment out the above two lines, and uncomment
        > # the following line.
        >
        > # Protocol "Xqueue"
        >
        > # Baudrate and SampleRate are only for some Logitech mice
        >
        > BaudRate 1200
        > # SampleRate 150
        >
        > # Emulate3Buttons is an option for 2-button Microsoft mice
        > # Emulate3Timeout is the timeout in milliseconds (default is 50ms)
        >
        > Emulate3Buttons
        > Emulate3Timeout 50
        > Resolution 100
        >
        > # ChordMiddle is an option for some 3-button Logitech mice
        >
        > # ChordMiddle
        >
        > EndSection
        >
        >
        > # *******************************************************************
        ***
        > # Monitor section
        > # *******************************************************************
        ***
        >
        > Section "Monitor"
        > Identifier "Primary Monitor"
        > VendorName "Dell"
        > ModelName "CPt C400"
        > HorizSync 31.5-48.5
        > VertRefresh 55-90
        > Modeline "1024x768" 65.00 1024 1032 1176 1344 768 771 777 806
        -hsync -vsync
        > EndSection
        >
        > Section "Device"
        > Identifier "Primary Card"
        > VendorName "Neomagic"
        > BoardName "256ZX"
        > VideoRam 4096
        > Chipset "NM2200"
        > EndSection
        >
        > Section "Screen"
        > Driver "FBDev"
        > Device "Primary Card"
        > Monitor "Primary Monitor"
        > #BlankTime 5
        > #SuspendTime 15
        > #OffTime 20
        > SubSection "Display"
        > Depth 16
        > Modes "default"
        > EndSubSection
        > EndSection
        >
        > Section "Screen"
        > Driver "SVGA"
        > Device "Primary Card"
        > Monitor "Primary Monitor"
        > #DefaultColorDepth 24
        > DefaultColorDepth 16
        > BlankTime 5
        > SuspendTime 15
        > OffTime 20
        > SubSection "Display"
        > Depth 8
        > Modes "1024x768"
        > EndSubSection
        > SubSection "Display"
        > Depth 15
        > Modes "1024x768"
        > EndSubSection
        > SubSection "Display"
        > Depth 16
        > Modes "1024x768"
        > EndSubSection
        > SubSection "Display"
        > Depth 24
        > Modes "1024x768"
        > EndSubSection
        > SubSection "Display"
        > Depth 32
        > Modes "1024x768"
        > EndSubSection
        > EndSection
        >
        > Section "Screen"
        > Driver "VGA16"
        > Device "Primary Card"
        > Monitor "Primary Monitor"
        > BlankTime 5
        > SuspendTime 15
        > OffTime 20
        > SubSection "Display"
        > Depth 4
        > Modes "1024x768"
        > EndSubSection
        > EndSection
        >
        > Section "Screen"
        > Driver "VGA2"
        > Device "Primary Card"
        > Monitor "Primary Monitor"
        > BlankTime 5
        > SuspendTime 15
        > OffTime 20
        > SubSection "Display"
        > Depth 1
        > Modes "1024x768"
        > EndSubSection
        > EndSection
        > --
        > ==================================================================
        > Alan Harding Network Appliance UK Ltd
        > Professional Services Engineer Unit 1160 Elliot Court
        > Herald Avenue
        > Tel:02476 718152 Coventry Business Park
        > Fax:02476 713620 Coventry
        > Mob:07715 539272 West Midlands CV5 6UB
        > ==================================================================
      • brad costa
        hi feddie, i have the same kind of comuter as you (but mine is a cs - i dont know what the diff is, but the specs seems the same) Linux 6.0 (kernel 2.2.5-15 on
        Message 3 of 3 , Mar 18, 2000
        • 0 Attachment
          hi feddie,
          i have the same kind of comuter as you (but mine is a cs - i dont know
          what the
          diff is, but the specs seems the same)
          Linux 6.0 (kernel 2.2.5-15 on an i686)
          Dell Latitude Cs 400 w/ 1024x768 res
          NeoMagic 256ZX Video Card, 4MB
          i have enclosed a config file from my computer that has redhat up and
          running,
          if you want you could give it a try.

          # file for the new xterm config
          #***************************************
          Section "Files"

          RgbPath "/usr/X11R6/lib/X11/rgb"
          FontPath "unix/:-1"

          EndSection

          #***************************************
          Section "ServerFlags"
          EndSection

          #***************************************

          Section "Keyboard"

          Protocol "Standard"
          AutoRepeat 500 5

          LeftAlt Meta
          RightAlt Meta
          ScrollLock Compose
          RightCtl Control

          XkbKeycodes "xfree86"
          XkbTypes "default"
          XkbCompat "default"
          XkbSymbols "us(pc101)"
          XkbGeometry "pc"
          XkbRules "xfree86"
          XkbModel "pc101"
          XkbLayout "us"

          EndSection
          #**************************************

          Section "Pointer"

          Protocol "PS/2"
          Device "/dev/mouse"

          EndSection
          #**************************************

          Section "Monitor"

          Identifier "LCD"
          VendorName "Unknown"
          ModelName "Unknown"

          HorizSync 31.5-48.5

          VertRefresh 60

          #1024x768 @ 60 Hz 48.4 kHz hsync
          Modeline "1024x768" 65 1024 1032 1176 1344 768 771 777 806 -hsync
          -vsync

          EndSection
          #**************************************

          Section "Device"
          Identifier "Generic VGA"
          VendorName "Unknown"
          BoardName "Unknown"
          Chipset "NM2200"

          EndSection

          Section "Device"
          Identifier "My Video Card"
          VendorName "NeoMagic"
          BoardName "256ZX"
          VideoRam 4096
          ChipSet "NM2200"
          Option "intern_disp"

          EndSection

          #*************************************

          Section "Screen"
          Driver "svga"
          # Use Device "Generic VGA" for Standard VGA 320x200x256
          Device "My Video Card"
          Monitor "LCD"
          SubSection "Display"
          Depth 8
          Modes "1024x768"
          ViewPort 0 0
          EndSubSection
          SubSection "Display"
          Depth 16
          Modes "1024x768"
          ViewPort 0 0
          EndSubSection
          SubSection "Display"
          Depth 32
          Modes "1024x768"
          ViewPort 0 0
          EndSubSection

          EndSection

          Section "Screen"
          Driver "vga 16"
          Device "Generic VGA"
          Monitor "LCD"
          SubSection "Display"
          Modes "640x480" "800x600"
          ViewPort 0 0
          EndSubSection
          EndSection

          Section "Screen"
          Driver "vga2"
          Device "Generic VGA"
          Monitor "LCD"
          SubSection "Display"
          Modes "640x480" "800x600"
          ViewPort 0 0
          EndSubSection
          EndSection

          Section "Screen"
          Driver "accel"
          Device "My Video Card"
          Monitor "LCD"
          SubSection "Display"
          Depth 8
          Modes "1024x768"
          ViewPort 0 0
          EndSubSection
          SubSection "Display"
          Depth 16
          Modes "1024x768"
          ViewPort 0 0
          EndSubSection
          Subsection "Display"
          Depth 32
          Modes "1024x768"
          ViewPort 0 0
          EndSubSection
          EndSection












          "freddie" <freddi-@...> wrote:
          original article:http://www.egroups.com/group/linux-dell-laptops/?start
          =445
          > Hi -
          >
          > I just wanted to clarify on if the specs on your laptop, Linux
          > version/kernel,
          > and video card match mine. I'm still having problems with X starting
          up
          > when I tried using your settings...
          >
          > This is what I've got:
          > Linux 6.0 (kernel 2.2.5-15 on an i686)
          > Dell Latitude Cpi R-series
          > NeoMagic 256ZX Video Card, 4MB
          >
          > Any suggestions?
          >
          > Thanks!
          >
          > alan harding <alan-@...> wrote:
          > original article:http://www.egroups.com/group/linux-dell-laptops/?sta
          rt
          > =369
          > > # File generated by XConfigurator.
          > >
          > > # *****************************************************************
          **
          > ***
          > > # Refer to the XF86Config(4/5) man page for details about the format
          > of
          > > # this file.
          > > # *****************************************************************
          **
          > ***
          > >
          > > # *****************************************************************
          **
          > ***
          > > # Files section. This allows default font and rgb paths to be set
          > > # *****************************************************************
          **
          > ***
          > >
          > > Section "Files"
          > >
          > > # The location of the RGB database. Note, this is the name of the
          > > # file minus the extension (like ".txt" or ".db"). There is
          normally
          > > # no need to change the default.
          > >
          > > RgbPath "/usr/X11R6/lib/X11/rgb"
          > >
          > > # Multiple FontPath entries are allowed (they are concatenated
          > together)
          > > # By default, Red Hat 6.0 and later now use a font server
          independent
          > of
          > > # the X server to render fonts.
          > >
          > > FontPath "unix/:-1"
          > >
          > > EndSection
          > >
          > > # *****************************************************************
          **
          > ***
          > > # Server flags section.
          > > # *****************************************************************
          **
          > ***
          > >
          > > Section "ServerFlags"
          > >
          > > # Uncomment this to cause a core dump at the spot where a signal
          > is
          > > # received. This may leave the console in an unusable state,
          but
          > may
          > > # provide a better stack trace in the core dump to aid in
          > debugging
          > > #NoTrapSignals
          > >
          > > # Uncomment this to disable the <Crtl><Alt><BS> server abort
          > sequence
          > > # This allows clients to receive this key event.
          > > #DontZap
          > >
          > > # Uncomment this to disable the <Crtl><Alt><KP_+>/<KP_-> mode
          > switching
          > > # sequences. This allows clients to receive these key events.
          > > #DontZoom
          > >
          > > EndSection
          > >
          > > # *****************************************************************
          **
          > ***
          > > # Input devices
          > > # *****************************************************************
          **
          > ***
          > >
          > > # *****************************************************************
          **
          > ***
          > > # Keyboard section
          > > # *****************************************************************
          **
          > ***
          > >
          > > Section "Keyboard"
          > >
          > > Protocol "Standard"
          > >
          > > # when using XQUEUE, comment out the above line, and uncomment
          the
          > > # following line
          > > #Protocol "Xqueue"
          > >
          > > AutoRepeat 500 5
          > >
          > > # Let the server do the NumLock processing. This should only
          be
          > > # required when using pre-R6 clients
          > > #ServerNumLock
          > >
          > > # Specify which keyboard LEDs can be user-controlled (eg, with
          > xset(1))
          > > Xleds 1 2 3
          > >
          > > #To set the LeftAlt to Meta, RightAlt key to ModeShift,
          > > #RightCtl key to Compose, and ScrollLock key to ModeLock:
          > >
          > > LeftAlt Meta
          > > RightAlt Meta
          > > ScrollLock Compose
          > > RightCtl Control
          > >
          > > # To disable the XKEYBOARD extension, uncomment XkbDisable.
          > >
          > > # XkbDisable
          > >
          > > # To customise the XKB settings to suit your keyboard, modify the
          > > # lines below (which are the defaults). For example, for a non-U.S.
          > > # keyboard, you will probably want to use:
          > > # XkbModel "pc102"
          > > # If you have a US Microsoft Natural keyboard, you can use:
          > > # XkbModel "microsoft"
          > > #
          > > # Then to change the language, change the Layout setting.
          > > # For example, a german layout can be obtained with:
          > > # XkbLayout "de"
          > > # or:
          > > # XkbLayout "de"
          > > # XkbVariant "nodeadkeys"
          > > #
          > > # If you'd like to switch the positions of your capslock and
          > > # control keys, use:
          > > # XkbOptions "ctrl:swapcaps"
          > >
          > > # These are the default XKB settings for XFree86
          > > # XkbRules "xfree86"
          > > # XkbModel "pc101"
          > > # XkbLayout "us"
          > > # XkbVariant ""
          > > # XkbOptions ""
          > >
          > > XkbKeycodes "xfree86"
          > > XkbTypes "default"
          > > XkbCompat "default"
          > > XkbSymbols "us(pc101)"
          > > XkbGeometry "pc"
          > > XkbRules "xfree86"
          > > XkbModel "pc104"
          > > XkbLayout "us"
          > > XkbOptions "ctrl:nocaps"
          > > EndSection
          > >
          > > # *****************************************************************
          **
          > ***
          > > # Pointer section
          > > # *****************************************************************
          **
          > ***
          > >
          > > Section "Pointer"
          > > Protocol "PS/2"
          > > Device "/dev/mouse"
          > >
          > > # When using XQUEUE, comment out the above two lines, and uncomment
          > > # the following line.
          > >
          > > # Protocol "Xqueue"
          > >
          > > # Baudrate and SampleRate are only for some Logitech mice
          > >
          > > BaudRate 1200
          > > # SampleRate 150
          > >
          > > # Emulate3Buttons is an option for 2-button Microsoft mice
          > > # Emulate3Timeout is the timeout in milliseconds (default is 50ms)
          > >
          > > Emulate3Buttons
          > > Emulate3Timeout 50
          > > Resolution 100
          > >
          > > # ChordMiddle is an option for some 3-button Logitech mice
          > >
          > > # ChordMiddle
          > >
          > > EndSection
          > >
          > >
          > > # *****************************************************************
          **
          > ***
          > > # Monitor section
          > > # *****************************************************************
          **
          > ***
          > >
          > > Section "Monitor"
          > > Identifier "Primary Monitor"
          > > VendorName "Dell"
          > > ModelName "CPt C400"
          > > HorizSync 31.5-48.5
          > > VertRefresh 55-90
          > > Modeline "1024x768" 65.00 1024 1032 1176 1344 768 771 777 806
          > -hsync -vsync
          > > EndSection
          > >
          > > Section "Device"
          > > Identifier "Primary Card"
          > > VendorName "Neomagic"
          > > BoardName "256ZX"
          > > VideoRam 4096
          > > Chipset "NM2200"
          > > EndSection
          > >
          > > Section "Screen"
          > > Driver "FBDev"
          > > Device "Primary Card"
          > > Monitor "Primary Monitor"
          > > #BlankTime 5
          > > #SuspendTime 15
          > > #OffTime 20
          > > SubSection "Display"
          > > Depth 16
          > > Modes "default"
          > > EndSubSection
          > > EndSection
          > >
          > > Section "Screen"
          > > Driver "SVGA"
          > > Device "Primary Card"
          > > Monitor "Primary Monitor"
          > > #DefaultColorDepth 24
          > > DefaultColorDepth 16
          > > BlankTime 5
          > > SuspendTime 15
          > > OffTime 20
          > > SubSection "Display"
          > > Depth 8
          > > Modes "1024x768"
          > > EndSubSection
          > > SubSection "Display"
          > > Depth 15
          > > Modes "1024x768"
          > > EndSubSection
          > > SubSection "Display"
          > > Depth 16
          > > Modes "1024x768"
          > > EndSubSection
          > > SubSection "Display"
          > > Depth 24
          > > Modes "1024x768"
          > > EndSubSection
          > > SubSection "Display"
          > > Depth 32
          > > Modes "1024x768"
          > > EndSubSection
          > > EndSection
          > >
          > > Section "Screen"
          > > Driver "VGA16"
          > > Device "Primary Card"
          > > Monitor "Primary Monitor"
          > > BlankTime 5
          > > SuspendTime 15
          > > OffTime 20
          > > SubSection "Display"
          > > Depth 4
          > > Modes "1024x768"
          > > EndSubSection
          > > EndSection
          > >
          > > Section "Screen"
          > > Driver "VGA2"
          > > Device "Primary Card"
          > > Monitor "Primary Monitor"
          > > BlankTime 5
          > > SuspendTime 15
          > > OffTime 20
          > > SubSection "Display"
          > > Depth 1
          > > Modes "1024x768"
          > > EndSubSection
          > > EndSection
          > > --
          > > ==================================================================
          > > Alan Harding Network Appliance UK Ltd
          > > Professional Services Engineer Unit 1160 Elliot Court
          > > Herald Avenue
          > > Tel:02476 718152 Coventry Business Park
          > > Fax:02476 713620 Coventry
          > > Mob:07715 539272 West Midlands CV5 6UB
          > > ==================================================================
          >
        Your message has been successfully submitted and would be delivered to recipients shortly.