Loading ...
Sorry, an error occurred while loading the content.

Re: [linux-dell-laptops] Latitude D620 and compiled kernel

Expand Messages
  • Alexander Toresson
    ... Note that if you re not using an initrd, you will need to compile support for your ide chipset into your kernel, and ditto for your file system. Regards,
    Message 1 of 3 , Apr 21 3:03 PM
    • 0 Attachment
      On 4/13/07, kerbachi <kerbachi_m@...> wrote:
      > Hi every one,
      >
      > I am trying to compile a custom kernel on the DELL Latitude D620, but
      > when booting i get the error:
      >
      > VFS: cannot open root device "sda6" or unknown-block(0,0)
      > please append a corretc "root=" boot option
      > Kernel panic - not syncing: VFS: Unable to mount root fs on
      > unknown-bloc(0,0)
      >
      >
      >
      > hereis the outpu of #lspci
      >
      > 00:00.0 Host bridge: Intel Corporation Mobile 945GM/PM/GMS/940GML and
      > 945GT Express Memory Controller Hub (rev 03)
      > 00:01.0 PCI bridge: Intel Corporation Mobile 945GM/PM/GMS/940GML and
      > 945GT Express PCI Express Root Port (rev 03)
      > 00:1b.0 Audio device: Intel Corporation 82801G (ICH7 Family) High
      > Definition Audio Controller (rev 01)
      > 00:1c.0 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express
      > Port 1 (rev 01)
      > 00:1c.1 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express
      > Port 2 (rev 01)
      > 00:1c.2 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express
      > Port 3 (rev 01)
      > 00:1d.0 USB Controller: Intel Corporation 82801G (ICH7 Family) USB
      > UHCI #1 (rev 01)
      > 00:1d.1 USB Controller: Intel Corporation 82801G (ICH7 Family) USB
      > UHCI #2 (rev 01)
      > 00:1d.2 USB Controller: Intel Corporation 82801G (ICH7 Family) USB
      > UHCI #3 (rev 01)
      > 00:1d.3 USB Controller: Intel Corporation 82801G (ICH7 Family) USB
      > UHCI #4 (rev 01)
      > 00:1d.7 USB Controller: Intel Corporation 82801G (ICH7 Family) USB2
      > EHCI Controller (rev 01)
      > 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev e1)
      > 00:1f.0 ISA bridge: Intel Corporation 82801GBM (ICH7-M) LPC Interface
      > Bridge (rev 01)
      > 00:1f.2 IDE interface: Intel Corporation 82801GBM/GHM (ICH7 Family)
      > Serial ATA Storage Controller IDE (rev 01)
      > 00:1f.3 SMBus: Intel Corporation 82801G (ICH7 Family) SMBus Controller
      > (rev 01)
      > 01:00.0 VGA compatible controller: nVidia Corporation Quadro NVS 110M
      > / GeForce Go 7300 (rev a1)
      > 03:01.0 CardBus bridge: O2 Micro, Inc. OZ601/6912/711E0
      > CardBus/SmartCardBus Controller (rev 40)
      > 09:00.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5752
      > Gigabit Ethernet PCI Express (rev 02)
      > 0c:00.0 Network controller: Broadcom Corporation BCM4310 UART (rev 01)
      >
      >
      >
      > If some one had complied a custom kernel with success, please send me
      > the .config file.
      >
      > Thanks
      >

      Note that if you're not using an initrd, you will need to compile
      support for your ide chipset into your kernel, and ditto for your file
      system.

      Regards, Alexander Toresson
    Your message has been successfully submitted and would be delivered to recipients shortly.