Loading ...
Sorry, an error occurred while loading the content.

Re: cd/dvd drive errors in dmesg

Expand Messages
  • G Karunakar
    No, I have a custom compiled 2.6.10, will have to check the options, though I have been using this kernel for 10months, only over last 1 month noticing these
    Message 1 of 3 , Oct 27, 2005
    • 0 Attachment
      No, I have a custom compiled 2.6.10, will have to check the options,
      though I have been using this kernel for 10months, only over last 1
      month noticing these messages.

      --- In linux-dell-laptops@yahoogroups.com, uteck <theuteck@g...> wrote:
      >
      > Are you booting the kernel with a scsi boot parameters while using a
      > 2.6 kernel? Check /boot/grub/menu.list for a 'scsi=/dev/hdc' line and
      > remove it. 2.6 kernels don't need that anymore.
      >
      > On 10/22/05, G Karunakar <karunakarg@y...> wrote:
      > > Hi all,
      > > I have a inspiron 510m. for quite some while i have been getting this
      > > error constantly - almost like every second ( comes up in console &
      > > dmesg output ).
      > >
      > > ATAPI device hdc:
      > > Error: Not ready -- (Sense key=0x02)
      > > No reference position found (media may be upside down) -- (asc=0x06,
      > > ascq=0x00)
      > > The failed "Read Cd/Dvd Capacity" packet command was:
      > > "25 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 "
      > >
      > > what does these errors mean?
      > > Though I am able to use the drive normally, play dvds & burn CDs etc.
      > > Only offlate vibrations have increased a bit when using it.
      > >
      > > thanks,
      > > Karunakar
      >
    Your message has been successfully submitted and would be delivered to recipients shortly.