Loading ...
Sorry, an error occurred while loading the content.

I5150 w/ Radeon M9 Issues

Expand Messages
  • jefcheng
    I m currently running Fedora Core 1 (kernel 2.4.22-2.2174.nptl, xfree86 4.3) on an Inspiron 5150 w/ radeon mobility 9000 64MB, and I m having having some
    Message 1 of 1 , Mar 2 11:17 AM
    • 0 Attachment
      I'm currently running Fedora Core 1 (kernel 2.4.22-2.2174.nptl,
      xfree86 4.3) on an Inspiron 5150 w/ radeon mobility 9000 64MB, and I'm
      having having some problems with both the xfree86 radeon driver and
      the ati fglrx driver. When I use the xfree86 driver, the x-server/gdm
      will not start if I load the "supported" options (AGPMode,
      AGPFastWrite, etc). Without the options, the x-server/gdm starts, but
      I get low fps scores (1000-1200) from glxgears. When I use the ati
      driver, the x-server/gdm starts fine, but any opengl program that I
      try to run locks up my system. Any suggestions/advice would be greatly
      appreciated.

      My XF86Config:
      # XFree86 4 configuration created by redhat-config-xfree86


      Section "ServerLayout"
      Identifier "single head configuration"
      Screen 0 "Screen0" 0 0
      InputDevice "Touchpad" "CorePointer"
      InputDevice "Mouse0" "SendCoreEvents"
      InputDevice "Keyboard0" "CoreKeyboard"
      EndSection


      Section "Files"


      # RgbPath is the location of the RGB database. Note, this is the name
      of the
      # file minus the extension (like ".txt" or ".db"). There is normally
      # no need to change the default.
      # Multiple FontPath entries are allowed (they are concatenated
      together)
      # By default, Red Hat 6.0 and later now use a font server independent
      of
      # the X server to render fonts.
      RgbPath "/usr/X11R6/lib/X11/rgb"
      FontPath "unix/:7100"
      EndSection

      Section "Module"
      Load "dbe"
      SubSection "extmod"
      Option "omit xfree86-dga" # don't initialise the DGA
      extension
      EndSubSection
      Load "extmod"
      Load "fbdevhw"
      Load "glx"
      Load "record"
      Load "freetype"
      Load "type1"
      Load "dri"
      EndSection

      Section "InputDevice"

      # Specify which keyboard LEDs can be user-controlled (eg, with
      xset(1))
      # Option "Xleds" "1 2 3"
      # To disable the XKEYBOARD extension, uncomment XkbDisable.
      # Option "XkbDisable"
      # To customise the XKB settings to suit your keyboard, modify the
      # lines below (which are the defaults). For example, for a non-U.S.
      # keyboard, you will probably want to use:
      # Option "XkbModel" "pc102"
      # If you have a US Microsoft Natural keyboard, you can use:
      # Option "XkbModel" "microsoft"
      #
      # Then to change the language, change the Layout setting.
      # For example, a german layout can be obtained with:
      # Option "XkbLayout" "de"
      # or:
      # Option "XkbLayout" "de"
      # Option "XkbVariant" "nodeadkeys"
      #
      # If you'd like to switch the positions of your capslock and
      # control keys, use:
      # Option "XkbOptions" "ctrl:swapcaps"
      # Or if you just want both to be control, use:
      # Option "XkbOptions" "ctrl:nocaps"
      #
      Identifier "Keyboard0"
      Driver "keyboard"
      Option "XkbRules" "xfree86"
      Option "XkbModel" "pc105"
      Option "XkbLayout" "us"
      EndSection

      Section "InputDevice"
      Identifier "Mouse0"
      Driver "mouse"
      Option "Protocol" "IMPS/2"
      Option "Device" "/dev/input/mice"
      Option "ZAxisMapping" "4 5"
      Option "Emulate3Buttons" "no"
      EndSection

      Section "InputDevice"
      Identifier "Touchpad"
      Driver "synaptics"
      Option "Device" "/dev/psaux"
      # Option "Edges" "1900 5400 1800 3900"
      Option "FingerLow" "25"
      Option "FingerHigh" "30"
      Option "MaxTapTime" "180"
      Option "MaxTapMove" "220"
      Option "VertScrollDelta" "100"
      Option "HorizScrollDelta" "100"
      Option "MinSpeed" "0.02"
      Option "MaxSpeed" "0.18"
      Option "AccelFactor" "0.0010"
      Option "UpDownScrolling" "true"
      Option "LockedDrags" "false"
      Option "ZAxisMapping" "4 5"
      Option "Emulate3Buttons" "true"
      Option "EmulateMidButtonTime" "75"
      EndSection

      Section "InputDevice"

      # If the normal CorePointer mouse is not a USB mouse then
      # this input device can be used in AlwaysCore mode to let you
      # also use USB mice at the same time.
      Identifier "DevInputMice"
      Driver "mouse"
      Option "Protocol" "IMPS/2"
      Option "Device" "/dev/input/mice"
      Option "ZAxisMapping" "4 5"
      Option "Emulate3Buttons" "no"
      EndSection

      Section "Monitor"
      Identifier "Monitor0"
      VendorName "Monitor Vendor"
      ModelName "Dell 1400x1050 Laptop Display Panel"
      HorizSync 31.5 - 90.0
      VertRefresh 59.0 - 75.0
      Option "DPMS"
      EndSection

      Section "Device"
      Identifier "Radeon M9"
      Driver "radeon"
      VendorName "ATI"
      BoardName "ATI Radeon Mobility M9"
      # Option "AGPFastWrite" "true"
      # Option "EnablePageFlip" "true"
      # Option "UseFBDev" "true"
      # Option "AGPMode" "4"
      # Option "DPMS"
      EndSection

      Section "Device"
      Identifier "ATI M9 fglrx"
      Driver "fglrx"
      # ### generic DRI settings ###
      # === disable PnP Monitor ===
      #Option "NoDDC"
      # === disable/enable XAA/DRI ===
      Option "no_accel" "no"
      Option "no_dri" "no"
      # === misc DRI settings ===
      Option "mtrr" "off" # disable DRI mtrr
      mapper, driver has its own code for mtrr
      # ### FireGL DDX driver module specific settings ###
      # === Screen Management ===
      Option "DesktopSetup" "0x00000000"
      Option "MonitorLayout" "AUTO, AUTO"
      Option "IgnoreEDID" "off"
      Option "HSync2" "unspecified"
      Option "VRefresh2" "unspecified"
      Option "ScreenOverlap" "0"
      # === TV-out Management ===
      Option "NoTV" "yes"
      Option "TVStandard" "NTSC-M"
      Option "TVHSizeAdj" "0"
      Option "TVVSizeAdj" "0"
      Option "TVHPosAdj" "0"
      Option "TVVPosAdj" "0"
      Option "TVHStartAdj" "0"
      Option "TVColorAdj" "0"
      Option "GammaCorrectionI" "0x00000000"
      Option "GammaCorrectionII" "0x00000000"
      # === OpenGL specific profiles/settings ===
      Option "Capabilities" "0x00000000"
      # === Video Overlay for the Xv extension ===
      Option "VideoOverlay" "on"
      # === OpenGL Overlay ===
      # Note: When OpenGL Overlay is enabled, Video Overlay
      # will be disabled automatically
      Option "OpenGLOverlay" "off"
      # === Center Mode (Laptops only) ===
      Option "CenterMode" "off"
      # === Pseudo Color Visuals (8-bit visuals) ===
      Option "PseudoColorVisuals" "off"
      # === QBS Management ===
      Option "Stereo" "off"
      Option "StereoSyncEnable" "1"
      # === FSAA Management ===
      Option "FSAAEnable" "no"
      Option "FSAAScale" "1"
      Option "FSAADisableGamma" "no"
      Option "FSAACustomizeMSPos" "no"
      Option "FSAAMSPosX0" "0.000000"
      Option "FSAAMSPosY0" "0.000000"
      Option "FSAAMSPosX1" "0.000000"
      Option "FSAAMSPosY1" "0.000000"
      Option "FSAAMSPosX2" "0.000000"
      Option "FSAAMSPosY2" "0.000000"
      Option "FSAAMSPosX3" "0.000000"
      Option "FSAAMSPosY3" "0.000000"
      Option "FSAAMSPosX4" "0.000000"
      Option "FSAAMSPosY4" "0.000000"
      Option "FSAAMSPosX5" "0.000000"
      Option "FSAAMSPosY5" "0.000000"
      # === Misc Options ===
      Option "UseFastTLS" "2"
      Option "BlockSignalsOnLock" "on"
      Option "UseInternalAGPGART" "no"
      Option "ForceGenericCPU" "no"
      Option "KernelModuleParm" "agplock=0" # AGP locked user
      pages: disabled
      BusID "PCI:1:0:0" # vendor=1002, device=4c66
      Screen 0
      EndSection


      Section "Screen"
      Identifier "Screen0"
      Device "ATI M9 fglrx"
      # Device "Radeon M9"
      Monitor "Monitor0"
      DefaultDepth 24
      SubSection "Display"
      Depth 24
      Modes "1400x1050" "1280x1024" "1280x960" "1152x864"
      "1024x768" "800x600" "640x480"
      EndSubSection
      EndSection

      Section "DRI"
      Group 0
      Mode 0666
      EndSection
    Your message has been successfully submitted and would be delivered to recipients shortly.