Loading ...
Sorry, an error occurred while loading the content.
 

Re: [linux-dell-laptops] Maestro 3 works with latest ALSA drivers

Expand Messages
  • Paul L. McNeely
    Do you have sound support and module support compiled into your kernel? -=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=- Don t be left behind:
    Message 1 of 21 , Jan 2, 2001
      Do you have sound support and module support compiled into your kernel?
      -=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
      Don't be left behind: http://www.leftbehindfilmproject.com/
      -=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
      Paul L. McNeely (paul@...)
      Backup E-mail: drderail@...
      Volunteer Editor: dmoz.org Webmaster: hotwv.org
      ICQ: 1305664, MSN/Yahoo: drderail, AIM: drderail2
      Jabber: drderail@...
      "A wise man conceals his knowledge
      while fools make clear foolish thoughts" - Proverbs 13:23
      -=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
      ----- Original Message -----
      From: "T. Daniel Crawford" <crawdad@...>
      To: <linux-dell-laptops@egroups.com>
      Sent: Tuesday, January 02, 2001 2:06 PM
      Subject: Re: [linux-dell-laptops] Maestro 3 works with latest ALSA drivers


      Would it be possible to get a copy of your /etc/asound.conf file and the
      output from the "lsmod" command on your I8000? I get nothing from my ESS
      Maestro 3 when I follow your steps below, and I'd really like to get sound
      running.

      Thanks in advance,

      -Daniel

      --
      T. Daniel Crawford Department of Chemistry
      crawdad@... Virginia Tech
      www.chem.vt.edu/chem-dept/crawford Voice: 540-231-7760 FAX: 540-231-3255


      On Mon, 1 Jan 2001 brianhef-egroups@... wrote:

      > The latest ALSA drivers (vesion 5.10) work well with the Maestro3
      > sound chip in my i8000 running Redhat 7.
      > Here is what I did to make it work.
      >
      > First, downloaded all three of theses file from alsa-project.org:
      > ftp://ftp.alsa-project.org/pub/driver/alsa-driver-0.5.10.tar.bz2
      > ftp://ftp.alsa-project.org/pub/lib/alsa-lib-0.5.10.tar.bz2
      > ftp://ftp.alsa-project.org/pub/utils/alsa-utils-0.5.10.tar.bz2
      >
      > #untarred the files:
      > tar -Ixvf alsa-driver-0.5.10.tar.bz2
      > tar -Ixvf alsa-libs-0.5.10.tar.bz2
      > tar -Ixvf alsa-utils-0.5.10.tar.bz2
      >
      > #configure,make, and install:
      > cd alsa-driver-0.5.10; ./configure; make; su -c 'make install'
      > cd alsa-libs-0.5.10; ./configure; make; su -c 'make install'
      > cd alsa-utils-0.5.10; ./configure; make; su -c 'make install'
      >
      > added these lines to /etc/modules.conf (as root user):
      > #lines for alsa sound drivers
      > alias char-major-116 snd
      > alias char-major-14 soundcore
      > alias snd-minor-oss-0 snd-mixer
      > alias snd-minor-oss-3 snd-pcm1-oss
      > alias snd-minor-oss-4 snd-pcm1-oss
      > alias snd-minor-oss-5 snd-pcm1-oss
      > alias snd-minor-oss-12 snd-pcm1-oss
      > alias snd-card-0 snd-card-maestro3
      > alias sound-service-1-12 snd-pcm-oss
      >
      > In order to make the sound card work after resuming from suspend I
      > created (as root user) a file /etc/sysconfig/apm-scripts/apmcontinue
      > with these lines :
      > /etc/rc.d/init.d/alsasound restart
      > /sbin/modprobe snd-mixer-oss
      > /sbin/modprobe snd-pcm-oss
      >
      > To start the sound modules, run (as root):
      > /etc/rc.d/init.d/alsasound restart
      >
      > I think the /etc/rc.d/init.d/alsasound script (and maybe the
      > apmcontinue script) is Redhat-specific. I'm not sure how best to load
      > and unload the modules in other linux distrubtions, but it's probably
      > in the the alsa documentation.
      >
      > Most sound application I've tried work fine. I can record with a
      > microphone, play cd's, play soundfiles with mpg123 and xmms and mix
      > with the mixer. The gnome sound monitor applet and Extrace waveform
      > display aren't working for me, and the built-in physical
      > volume-control buttons on the Inspiron 8000 don't work either. Overall
      > the system is very usable, though.
      >
      >
      >
      > --------------------------------------------------------------
      > Please post your X config files in the group links or database
      >



      eGroups Sponsor


      --------------------------------------------------------------
      Please post your X config files in the group links or database
    • T. Daniel Crawford
      ... Yes, I m using the 2.2.16-22 kernel provided with RH7, which includes sound support. The modules are being loaded it appears, but I m not experienced
      Message 2 of 21 , Jan 2, 2001
        On Tue, 2 Jan 2001, Paul L. McNeely wrote:

        > Do you have sound support and module support compiled into your kernel?

        Yes, I'm using the 2.2.16-22 kernel provided with RH7, which includes sound
        support. The modules are being loaded it appears, but I'm not experienced
        enough to debug this problem very efficiently:

        snd-pcm-oss 16656 0 (unused)
        snd-pcm-plugin 14224 0 [snd-pcm-oss]
        snd-mixer-oss 3936 0 [snd-pcm-oss]
        snd-card-maestro3 11584 0
        snd-pcm 29408 0 [snd-pcm-oss snd-pcm-plugin
        snd-card-maestro3]
        snd-timer 8064 0 [snd-pcm]
        snd-ac97-codec 23712 0 [snd-card-maestro3]
        snd-mixer 23328 0 [snd-mixer-oss snd-ac97-codec]
        snd 35664 1 [snd-pcm-oss snd-pcm-plugin snd-mixer-oss snd-card-maestro3 snd-pcm snd-timer snd-ac97-codec snd-mixer]
        soundcore 2608 2 [snd]

        Any direction from those more knowledgeable than I would be greatly
        appreciated.

        -Daniel
      • dubeys@bxscience.edu
        hey I have the same problem as he does. The drivers load; but nothing works. I get weird messages about /dev/dsp from mpg123 and xmms I am running linux
        Message 3 of 21 , Jan 2, 2001
          hey

          I have the same problem as he does. The drivers load; but nothing
          works. I get weird messages about /dev/dsp from mpg123 and xmms I
          am running linux 2.4-test12 with the minimum sound support required,
          and modules enabled.


          i've almost got the zabbo.net drivers to work. just the ac97_codec
          module seems to give me some trouble.

          As for the getting the sound blaster compat mode for the Maestro3...
          Everytime i'm about to "compile" the DOS hdimage, i get a really odd
          error message. I have contacted some far more advanced and
          experinced DOSemu users. Hopefully they will help resolve the issue.

          I really want sound support. Everything else works. But using those
          OSS/Price drivers really suck.

          =)

          Sunny Dubey

          --- In linux-dell-laptops@egroups.com, "T. Daniel Crawford"
          <crawdad@v...> wrote:
          > On Tue, 2 Jan 2001, Paul L. McNeely wrote:
          >
          > > Do you have sound support and module support compiled into your
          kernel?
          >
          > Yes, I'm using the 2.2.16-22 kernel provided with RH7, which
          includes sound
          > support. The modules are being loaded it appears, but I'm not
          experienced
          > enough to debug this problem very efficiently:
          >
          > snd-pcm-oss 16656 0 (unused)
          > snd-pcm-plugin 14224 0 [snd-pcm-oss]
          > snd-mixer-oss 3936 0 [snd-pcm-oss]
          > snd-card-maestro3 11584 0
          > snd-pcm 29408 0 [snd-pcm-oss snd-pcm-plugin
          > snd-card-maestro3]
          > snd-timer 8064 0 [snd-pcm]
          > snd-ac97-codec 23712 0 [snd-card-maestro3]
          > snd-mixer 23328 0 [snd-mixer-oss snd-ac97-codec]
          > snd 35664 1 [snd-pcm-oss snd-pcm-plugin
          snd-mixer-oss snd-card-maestro3 snd-pcm snd-timer snd-ac97-codec
          snd-mixer]
          > soundcore 2608 2 [snd]
          >
          > Any direction from those more knowledgeable than I would be greatly
          > appreciated.
          >
          > -Daniel
        • Brian Hefferan
          The alsa drivers are still working for me on my i8000, in fact I m on an mp3 bing right now ; . Here are couple more things to try: 1. try manually running the
          Message 4 of 21 , Jan 2, 2001
            The alsa drivers are still working for me on my i8000, in fact I'm on
            an mp3 bing right now ;>.

            Here are couple more things to try:

            1. try manually running the contents of the
            /etc/sysconfig/apm-scripts/apmcontinue file I mentioned. That is, do
            this as root (the first command assumes Redhat linux):

            etc/rc.d/init.d/alsasound restart
            /sbin/modprobe snd-mixer-oss
            /sbin/modprobe snd-pcm-oss

            2. The alsa drivers start with the mixer muted by default, so it need
            to be unmuted before you get any sound. I started /usr/bin/alsamixer,
            used the arrow keys to navigate and adjust volume levels, and used the
            "m" key to toggle off the muting. Quit with the escape key. Once it's
            unmuted it should stay unmuted even after a reboot.

            I'm using the stock redhat 7 kernel (2.2.16-22) with no modification,
            although I am running the latest pcmcia drivers from Sourcforge as you
            suggested.

            I did not make any changes to /etc/asound.conf, but here is what's in
            mine:
            # ALSA driver configuration
            # This configuration is generated with the alsactl program.

            soundcard("card1") {
            mixer("ESS Maestro3") {
            ; The type is 'bool'.
            switch("AC97 Mono Output Select", false)
            ; The type is 'bool'.
            switch("AC97 Second MIC", false)
            ; The type is 'bool'.
            switch("ADC/DAC Loopback", false)
            element("Input Gain Switch",0,101,Switch2(on))
            ; Voice 0 : Min 0 Max 15
            ; Voice 1 : Min 0 Max 15
            element("Input Gain Volume",0,200,Volume1(11,11))
            element("Master Mono Switch",0,101,Switch2(on))
            ; Voice 0 : Min 0 Max 31
            element("Master Mono Volume",0,200,Volume1(27))
            element("Surround Switch",0,100,Switch1(on,on))
            ; Voice 0 : Min 0 Max 31
            ; Voice 1 : Min 0 Max 31
            element("Surround Volume",0,200,Volume1(25,25))
            element("Master Switch",0,101,Switch2(on))
            ; Voice 0 : Min 0 Max 31
            ; Voice 1 : Min 0 Max 31
            element("Master Volume",0,200,Volume1(27,27))
            ; The 3D effect has an on/off switch.
            ; Wide : Min 0 Max 3
            element("Effect",0,600,_3D_Effect1(sw=off,wide=0))
            element("Aux Switch",0,101,Switch2(on))
            ; Voice 0 : Min 0 Max 31
            ; Voice 1 : Min 0 Max 31
            element("Aux Volume",0,200,Volume1(26,26))
            element("Video Switch",0,101,Switch2(on))
            ; Voice 0 : Min 0 Max 31
            ; Voice 1 : Min 0 Max 31
            element("Video Volume",0,200,Volume1(19,19))
            element("CD Switch",0,101,Switch2(on))
            ; Voice 0 : Min 0 Max 31
            ; Voice 1 : Min 0 Max 31
            element("CD Volume",0,200,Volume1(26,26))
            element("Line Switch",0,101,Switch2(on))
            ; Voice 0 : Min 0 Max 31
            ; Voice 1 : Min 0 Max 31
            element("Line Volume",0,200,Volume1(23,23))
            element("MIC Switch",0,101,Switch2(on))
            ; Voice 0 : Min 0 Max 31
            element("MIC Volume",0,200,Volume1(25))
            ; Voice 0 : Min 0 Max 1
            element("MIC Boost",0,200,Volume1(0))
            element("Phone Switch",0,101,Switch2(on))
            ; Voice 0 : Min 0 Max 31
            element("Phone Volume",0,200,Volume1(22))
            element("PC Speaker Switch",0,101,Switch2(on))
            ; Voice 0 : Min 0 Max 15
            element("PC Speaker Volume",0,200,Volume1(12))
            element("PCM Switch",0,101,Switch2(on))
            ; Voice 0 : Min 0 Max 31
            ; Voice 1 : Min 0 Max 31
            element("PCM Volume",0,200,Volume1(13,13))
            element("Mono Output MUX",0,401,Mux2(element("Mono-Out
            Accumulator",0,301))) element("Input
            MUX",0,400,Mux1(element("Line",0,0),element("Line",0,0)))
            }
            }


            Here are the results I get from /sbin/lsmod:
            Module Size Used by
            snd-pcm-oss 16460 0
            snd-pcm-plugin 14248 0 [snd-pcm-oss]
            snd-mixer-oss 3924 0 [snd-pcm-oss]
            snd-card-maestro3 11604 0
            snd-pcm 29464 0 [snd-pcm-oss snd-pcm-plugin
            snd-card-maestro3]
            snd-timer 8064 0 [snd-pcm]
            snd-ac97-codec 23680 0 [snd-card-maestro3]
            snd-mixer 23356 0 [snd-mixer-oss snd-ac97-codec]
            snd 35820 1 [snd-pcm-oss snd-pcm-plugin
            snd-mixer-oss snd-card-maestro3 snd-pcm snd-timer snd-ac97-codec
            snd-mixer]
            soundcore 2596 2 [snd]
            binfmt_misc 3280 0
            ltmodem 453200 0 (unused)
            ds 6248 2
            i82365 21552 2
            pcmcia_core 43776 0 [ds i82365]
            lockd 31176 1 (autoclean)
            sunrpc 52964 1 (autoclean) [lockd]
            eepro100 16180 1 (autoclean)
            usb-uhci 19052 0 (unused)

            (the eepro100 line is for the intel-based modem/network card that
            shipped with my machine. I think other i8000s use a 3com card instead)

            Let me know if you still have trouble.
            ---Brian

            ----In linux-dell-laptops@egroups.com, "T. Daniel Crawford"
            <crawdad@v...> wrote:
            > Would it be possible to get a copy of your /etc/asound.conf file and
            the
            > output from the "lsmod" command on your I8000?
          • T. Daniel Crawford
            Brian, You were correct: the card was muted and I had to adjust it using a mixer program. Everything works great now, those some test MPEGs with audio just
            Message 5 of 21 , Jan 3, 2001
              Brian,

              You were correct: the card was muted and I had to adjust it using a mixer
              program. Everything works great now, those some test MPEGs with audio just
              give static when played with either plaympeg or gtv.

              I am maintaining an I8000/RH7.0 web page and I have added your steps for
              getting the alsa drivers working. Do you mind if I add your name to the
              page to give you proper credit?

              http://orion.chem.vt.edu/i8000

              Thanks for your help!

              -Daniel


              On Wed, 3 Jan 2001, Brian Hefferan wrote:

              > The alsa drivers are still working for me on my i8000, in fact I'm on
              > an mp3 bing right now ;>.
              >
              > Here are couple more things to try:
              >
              > 1. try manually running the contents of the
              > /etc/sysconfig/apm-scripts/apmcontinue file I mentioned. That is, do
              > this as root (the first command assumes Redhat linux):
              >
              > etc/rc.d/init.d/alsasound restart
              > /sbin/modprobe snd-mixer-oss
              > /sbin/modprobe snd-pcm-oss
              >
              > 2. The alsa drivers start with the mixer muted by default, so it need
              > to be unmuted before you get any sound. I started /usr/bin/alsamixer,
              > used the arrow keys to navigate and adjust volume levels, and used the
              > "m" key to toggle off the muting. Quit with the escape key. Once it's
              > unmuted it should stay unmuted even after a reboot.
              >
              > I'm using the stock redhat 7 kernel (2.2.16-22) with no modification,
              > although I am running the latest pcmcia drivers from Sourcforge as you
              > suggested.
              >
              > I did not make any changes to /etc/asound.conf, but here is what's in
              > mine:
              > # ALSA driver configuration
              > # This configuration is generated with the alsactl program.
              >
              > soundcard("card1") {
              > mixer("ESS Maestro3") {
              > ; The type is 'bool'.
              > switch("AC97 Mono Output Select", false)
              > ; The type is 'bool'.
              > switch("AC97 Second MIC", false)
              > ; The type is 'bool'.
              > switch("ADC/DAC Loopback", false)
              > element("Input Gain Switch",0,101,Switch2(on))
              > ; Voice 0 : Min 0 Max 15
              > ; Voice 1 : Min 0 Max 15
              > element("Input Gain Volume",0,200,Volume1(11,11))
              > element("Master Mono Switch",0,101,Switch2(on))
              > ; Voice 0 : Min 0 Max 31
              > element("Master Mono Volume",0,200,Volume1(27))
              > element("Surround Switch",0,100,Switch1(on,on))
              > ; Voice 0 : Min 0 Max 31
              > ; Voice 1 : Min 0 Max 31
              > element("Surround Volume",0,200,Volume1(25,25))
              > element("Master Switch",0,101,Switch2(on))
              > ; Voice 0 : Min 0 Max 31
              > ; Voice 1 : Min 0 Max 31
              > element("Master Volume",0,200,Volume1(27,27))
              > ; The 3D effect has an on/off switch.
              > ; Wide : Min 0 Max 3
              > element("Effect",0,600,_3D_Effect1(sw=off,wide=0))
              > element("Aux Switch",0,101,Switch2(on))
              > ; Voice 0 : Min 0 Max 31
              > ; Voice 1 : Min 0 Max 31
              > element("Aux Volume",0,200,Volume1(26,26))
              > element("Video Switch",0,101,Switch2(on))
              > ; Voice 0 : Min 0 Max 31
              > ; Voice 1 : Min 0 Max 31
              > element("Video Volume",0,200,Volume1(19,19))
              > element("CD Switch",0,101,Switch2(on))
              > ; Voice 0 : Min 0 Max 31
              > ; Voice 1 : Min 0 Max 31
              > element("CD Volume",0,200,Volume1(26,26))
              > element("Line Switch",0,101,Switch2(on))
              > ; Voice 0 : Min 0 Max 31
              > ; Voice 1 : Min 0 Max 31
              > element("Line Volume",0,200,Volume1(23,23))
              > element("MIC Switch",0,101,Switch2(on))
              > ; Voice 0 : Min 0 Max 31
              > element("MIC Volume",0,200,Volume1(25))
              > ; Voice 0 : Min 0 Max 1
              > element("MIC Boost",0,200,Volume1(0))
              > element("Phone Switch",0,101,Switch2(on))
              > ; Voice 0 : Min 0 Max 31
              > element("Phone Volume",0,200,Volume1(22))
              > element("PC Speaker Switch",0,101,Switch2(on))
              > ; Voice 0 : Min 0 Max 15
              > element("PC Speaker Volume",0,200,Volume1(12))
              > element("PCM Switch",0,101,Switch2(on))
              > ; Voice 0 : Min 0 Max 31
              > ; Voice 1 : Min 0 Max 31
              > element("PCM Volume",0,200,Volume1(13,13))
              > element("Mono Output MUX",0,401,Mux2(element("Mono-Out
              > Accumulator",0,301))) element("Input
              > MUX",0,400,Mux1(element("Line",0,0),element("Line",0,0)))
              > }
              > }
              >
              >
              > Here are the results I get from /sbin/lsmod:
              > Module Size Used by
              > snd-pcm-oss 16460 0
              > snd-pcm-plugin 14248 0 [snd-pcm-oss]
              > snd-mixer-oss 3924 0 [snd-pcm-oss]
              > snd-card-maestro3 11604 0
              > snd-pcm 29464 0 [snd-pcm-oss snd-pcm-plugin
              > snd-card-maestro3]
              > snd-timer 8064 0 [snd-pcm]
              > snd-ac97-codec 23680 0 [snd-card-maestro3]
              > snd-mixer 23356 0 [snd-mixer-oss snd-ac97-codec]
              > snd 35820 1 [snd-pcm-oss snd-pcm-plugin
              > snd-mixer-oss snd-card-maestro3 snd-pcm snd-timer snd-ac97-codec
              > snd-mixer]
              > soundcore 2596 2 [snd]
              > binfmt_misc 3280 0
              > ltmodem 453200 0 (unused)
              > ds 6248 2
              > i82365 21552 2
              > pcmcia_core 43776 0 [ds i82365]
              > lockd 31176 1 (autoclean)
              > sunrpc 52964 1 (autoclean) [lockd]
              > eepro100 16180 1 (autoclean)
              > usb-uhci 19052 0 (unused)
              >
              > (the eepro100 line is for the intel-based modem/network card that
              > shipped with my machine. I think other i8000s use a 3com card instead)
              >
              > Let me know if you still have trouble.
              > ---Brian
              >
              > ----In linux-dell-laptops@egroups.com, "T. Daniel Crawford"
              > <crawdad@v...> wrote:
              > > Would it be possible to get a copy of your /etc/asound.conf file and
              > the
              > > output from the "lsmod" command on your I8000?
              >
              >
              >
              >
              > --------------------------------------------------------------
              > Please post your X config files in the group links or database
              >
            • rajeeva@research.bell-labs.com
              Hi I have a Dell C800 with Maestro 3 card. I downloaded and installed the alsa sound driver. But when I run /etc/init.d/alsasound restart, I get a lot of
              Message 6 of 21 , Jan 12, 2001
                Hi I have a Dell C800 with Maestro 3 card. I downloaded and installed
                the alsa sound driver. But when I run /etc/init.d/alsasound restart, I
                get a lot of unresolved symbols in loading sound modules. Any idea,
                what could be wrong here.

                Thanks,

                rajeev


                --- In linux-dell-laptops@egroups.com, brianhef-egroups@h... wrote:
                > The latest ALSA drivers (vesion 5.10) work well with the Maestro3
                > sound chip in my i8000 running Redhat 7.
                > Here is what I did to make it work.
                >
                > First, downloaded all three of theses file from alsa-project.org:
                > ftp://ftp.alsa-project.org/pub/driver/alsa-driver-0.5.10.tar.bz2
                > ftp://ftp.alsa-project.org/pub/lib/alsa-lib-0.5.10.tar.bz2
                > ftp://ftp.alsa-project.org/pub/utils/alsa-utils-0.5.10.tar.bz2
                >
                > #untarred the files:
                > tar -Ixvf alsa-driver-0.5.10.tar.bz2
                > tar -Ixvf alsa-libs-0.5.10.tar.bz2
                > tar -Ixvf alsa-utils-0.5.10.tar.bz2
                >
                > #configure,make, and install:
                > cd alsa-driver-0.5.10; ./configure; make; su -c 'make install'
                > cd alsa-libs-0.5.10; ./configure; make; su -c 'make install'
                > cd alsa-utils-0.5.10; ./configure; make; su -c 'make install'
                >
                > added these lines to /etc/modules.conf (as root user):
                > #lines for alsa sound drivers
                > alias char-major-116 snd
                > alias char-major-14 soundcore
                > alias snd-minor-oss-0 snd-mixer
                > alias snd-minor-oss-3 snd-pcm1-oss
                > alias snd-minor-oss-4 snd-pcm1-oss
                > alias snd-minor-oss-5 snd-pcm1-oss
                > alias snd-minor-oss-12 snd-pcm1-oss
                > alias snd-card-0 snd-card-maestro3
                > alias sound-service-1-12 snd-pcm-oss
                >
                > In order to make the sound card work after resuming from suspend I
                > created (as root user) a file /etc/sysconfig/apm-scripts/apmcontinue
                > with these lines :
                > /etc/rc.d/init.d/alsasound restart
                > /sbin/modprobe snd-mixer-oss
                > /sbin/modprobe snd-pcm-oss
                >
                > To start the sound modules, run (as root):
                > /etc/rc.d/init.d/alsasound restart
                >
                > I think the /etc/rc.d/init.d/alsasound script (and maybe the
                > apmcontinue script) is Redhat-specific. I'm not sure how best to
                load
                > and unload the modules in other linux distrubtions, but it's
                probably
                > in the the alsa documentation.
                >
                > Most sound application I've tried work fine. I can record with a
                > microphone, play cd's, play soundfiles with mpg123 and xmms and mix
                > with the mixer. The gnome sound monitor applet and Extrace waveform
                > display aren't working for me, and the built-in physical
                > volume-control buttons on the Inspiron 8000 don't work either.
                Overall
                > the system is very usable, though.
              • khirbat@yahoo.com
                Try insmod /path/to/snd-card-maestro3.o Make sure that you have the soundcore.o module. If you don t, you will need to compile it from your kernel source.
                Message 7 of 21 , Jan 12, 2001
                  Try insmod /path/to/snd-card-maestro3.o

                  Make sure that you have the soundcore.o module. If you don't, you will
                  need to compile it from your kernel source. Exactly which unresolved
                  symbols did it complain about?

                  bye :)
                  Anmol

                  On Fri, 12 Jan 2001 rajeeva@...-labs.com wrote:

                  > Hi I have a Dell C800 with Maestro 3 card. I downloaded and installed
                  > the alsa sound driver. But when I run /etc/init.d/alsasound restart, I
                  > get a lot of unresolved symbols in loading sound modules. Any idea,
                  > what could be wrong here.
                  >
                  > Thanks,
                  >
                  > rajeev
                  >
                  >
                  > --- In linux-dell-laptops@egroups.com, brianhef-egroups@h... wrote:
                  > > The latest ALSA drivers (vesion 5.10) work well with the Maestro3
                  > > sound chip in my i8000 running Redhat 7.
                  > > Here is what I did to make it work.
                  > >
                  > > First, downloaded all three of theses file from alsa-project.org:
                  > > ftp://ftp.alsa-project.org/pub/driver/alsa-driver-0.5.10.tar.bz2
                  > > ftp://ftp.alsa-project.org/pub/lib/alsa-lib-0.5.10.tar.bz2
                  > > ftp://ftp.alsa-project.org/pub/utils/alsa-utils-0.5.10.tar.bz2
                  > >
                  > > #untarred the files:
                  > > tar -Ixvf alsa-driver-0.5.10.tar.bz2
                  > > tar -Ixvf alsa-libs-0.5.10.tar.bz2
                  > > tar -Ixvf alsa-utils-0.5.10.tar.bz2
                  > >
                  > > #configure,make, and install:
                  > > cd alsa-driver-0.5.10; ./configure; make; su -c 'make install'
                  > > cd alsa-libs-0.5.10; ./configure; make; su -c 'make install'
                  > > cd alsa-utils-0.5.10; ./configure; make; su -c 'make install'
                  > >
                  > > added these lines to /etc/modules.conf (as root user):
                  > > #lines for alsa sound drivers
                  > > alias char-major-116 snd
                  > > alias char-major-14 soundcore
                  > > alias snd-minor-oss-0 snd-mixer
                  > > alias snd-minor-oss-3 snd-pcm1-oss
                  > > alias snd-minor-oss-4 snd-pcm1-oss
                  > > alias snd-minor-oss-5 snd-pcm1-oss
                  > > alias snd-minor-oss-12 snd-pcm1-oss
                  > > alias snd-card-0 snd-card-maestro3
                  > > alias sound-service-1-12 snd-pcm-oss
                  > >
                  > > In order to make the sound card work after resuming from suspend I
                  > > created (as root user) a file /etc/sysconfig/apm-scripts/apmcontinue
                  > > with these lines :
                  > > /etc/rc.d/init.d/alsasound restart
                  > > /sbin/modprobe snd-mixer-oss
                  > > /sbin/modprobe snd-pcm-oss
                  > >
                  > > To start the sound modules, run (as root):
                  > > /etc/rc.d/init.d/alsasound restart
                  > >
                  > > I think the /etc/rc.d/init.d/alsasound script (and maybe the
                  > > apmcontinue script) is Redhat-specific. I'm not sure how best to
                  > load
                  > > and unload the modules in other linux distrubtions, but it's
                  > probably
                  > > in the the alsa documentation.
                  > >
                  > > Most sound application I've tried work fine. I can record with a
                  > > microphone, play cd's, play soundfiles with mpg123 and xmms and mix
                  > > with the mixer. The gnome sound monitor applet and Extrace waveform
                  > > display aren't working for me, and the built-in physical
                  > > volume-control buttons on the Inspiron 8000 don't work either.
                  > Overall
                  > > the system is very usable, though.
                  >
                  >
                  > --------------------------------------------------------------
                  > Please post your X config files in the group links or database
                  >
                • rajeeva@research.bell-labs.com
                  Here are the unresoved symbols I get Thanks, rajeev [root@toy /root]# lsmod Module Size Used by ide-cd 23756 0 (autoclean)
                  Message 8 of 21 , Jan 12, 2001
                    Here are the unresoved symbols I get

                    Thanks,

                    rajeev



                    [root@toy /root]# lsmod
                    Module Size Used by
                    ide-cd 23756 0 (autoclean)
                    soundcore 2980 0 (unused)
                    ds 6280 2
                    i82365 21972 2
                    pcmcia_core 50400 0 [ds i82365]
                    autofs 9252 1 (autoclean)
                    lockd 31656 1 (autoclean)
                    sunrpc 54116 1 (autoclean) [lockd]
                    3c59x 20100 1 (autoclean)
                    usb-uhci 20140 0 (unused)
                    usbcore 44392 1 [usb-uhci]

                    [root@toy /root]# insmod snd-card-maestro3
                    Using /lib/modules/2.2.16-23/misc/snd-card-maestro3.o
                    /lib/modules/2.2.16-23/misc/snd-card-maestro3.o: unresolved symbol
                    schedule_timeout_R17d59d01
                    /lib/modules/2.2.16-23/misc/snd-card-maestro3.o: unresolved symbol
                    snd_pci_compat_set_driver_data_Rsmp_01a6c77e
                    /lib/modules/2.2.16-23/misc/snd-card-maestro3.o: unresolved symbol
                    snd_device_new_Rsmp_39369ef6
                    /lib/modules/2.2.16-23/misc/snd-card-maestro3.o: unresolved symbol
                    snd_kcalloc_Rsmp_4da9e78a
                    /lib/modules/2.2.16-23/misc/snd-card-maestro3.o: unresolved symbol
                    __const_udelay_Reae3dfd6
                    /lib/modules/2.2.16-23/misc/snd-card-maestro3.o: unresolved symbol
                    pci_write_config_dword_Rf0fbd200
                    /lib/modules/2.2.16-23/misc/snd-card-maestro3.o: unresolved symbol
                    pci_read_config_dword_R2ca7e89f
                    /lib/modules/2.2.16-23/misc/snd-card-maestro3.o: unresolved symbol
                    snd_register_interrupt_Rsmp_354a50df
                    /lib/modules/2.2.16-23/misc/snd-card-maestro3.o: unresolved symbol
                    snd_pcm_new_Rsmp_8323dc87
                    /lib/modules/2.2.16-23/misc/snd-card-maestro3.o: unresolved symbol
                    synchronize_irq_R143bb217
                    /lib/modules/2.2.16-23/misc/snd-card-maestro3.o: unresolved symbol
                    snd_register_ioport_Rsmp_37c19a3c
                    /lib/modules/2.2.16-23/misc/snd-card-maestro3.o: unresolved symbol
                    snd_pcm_lib_transfer_size_Rsmp_87ca03df
                    /lib/modules/2.2.16-23/misc/snd-card-maestro3.o: unresolved symbol
                    sprintf_R3c2c5af5
                    /lib/modules/2.2.16-23/misc/snd-card-maestro3.o: unresolved symbol
                    snd_pcm_lib_transfer_fragment_Rsmp_ac2a6c0e
                    /lib/modules/2.2.16-23/misc/snd-card-maestro3.o: unresolved symbol
                    snd_pcm_format_width_Rsmp_6b077f05
                    /lib/modules/2.2.16-23/misc/snd-card-maestro3.o: unresolved symbol
                    snd_ac97_mixer_Rsmp_663bf4d9
                    /lib/modules/2.2.16-23/misc/snd-card-maestro3.o: unresolved symbol
                    snd_card_register_Rsmp_5677d3af
                    /lib/modules/2.2.16-23/misc/snd-card-maestro3.o: unresolved symbol
                    snd_pcm_dma_alloc_Rsmp_8dfb5d8d
                    /lib/modules/2.2.16-23/misc/snd-card-maestro3.o: unresolved symbol
                    snd_card_new_Rsmp_c9ccfdc1
                    /lib/modules/2.2.16-23/misc/snd-card-maestro3.o: unresolved symbol
                    snd_pci_compat_unregister_driver_Rsmp_79f04768
                    /lib/modules/2.2.16-23/misc/snd-card-maestro3.o: unresolved symbol
                    pci_set_master_R040f6432
                    /lib/modules/2.2.16-23/misc/snd-card-maestro3.o: unresolved symbol
                    snd_pcm_dma_free_Rsmp_acf11253
                    /lib/modules/2.2.16-23/misc/snd-card-maestro3.o: unresolved symbol
                    printk_R1b7d4074
                    /lib/modules/2.2.16-23/misc/snd-card-maestro3.o: unresolved symbol
                    snd_register_dma_channel_Rsmp_60fef1cb
                    /lib/modules/2.2.16-23/misc/snd-card-maestro3.o: unresolved symbol
                    snd_pci_compat_register_driver_Rsmp_0127e0d2
                    /lib/modules/2.2.16-23/misc/snd-card-maestro3.o: unresolved symbol
                    snd_card_free_Rsmp_2f585365
                    /lib/modules/2.2.16-23/misc/snd-card-maestro3.o: unresolved symbol
                    snd_pcm_lib_ioctl_Rsmp_c628453f
                    /lib/modules/2.2.16-23/misc/snd-card-maestro3.o: unresolved symbol
                    snd_ac97_write_lock_Rsmp_a1b26167
                    /lib/modules/2.2.16-23/misc/snd-card-maestro3.o: unresolved symbol
                    snd_pci_compat_get_driver_data_Rsmp_218aad51
                    /lib/modules/2.2.16-23/misc/snd-card-maestro3.o: unresolved symbol
                    snd_pcm_transfer_done_Rsmp_a6e2f468
                    /lib/modules/2.2.16-23/misc/snd-card-maestro3.o: unresolved symbol
                    _snd_kfree_Rsmp_17cd9200
                    [root@toy /root]#


                    --- In linux-dell-laptops@egroups.com, khirbat@y... wrote:
                    > Try insmod /path/to/snd-card-maestro3.o
                    >
                    > Make sure that you have the soundcore.o module. If you don't, you
                    will
                    > need to compile it from your kernel source. Exactly which unresolved
                    > symbols did it complain about?
                    >
                    > bye :)
                    > Anmol
                    >
                    > On Fri, 12 Jan 2001 rajeeva@r... wrote:
                    >
                    > > Hi I have a Dell C800 with Maestro 3 card. I downloaded and
                    installed
                    > > the alsa sound driver. But when I run /etc/init.d/alsasound
                    restart, I
                    > > get a lot of unresolved symbols in loading sound modules. Any
                    idea,
                    > > what could be wrong here.
                    > >
                    > > Thanks,
                    > >
                    > > rajeev
                    > >
                    > >
                  • T. Daniel Crawford
                    Take a look at /lib/modules/2.2.16-23/modules.dep and see if there s a snd-card-maestero3.o entry. If not, then all the other modules on which that one
                    Message 9 of 21 , Jan 12, 2001
                      Take a look at /lib/modules/2.2.16-23/modules.dep and see if there's a
                      snd-card-maestero3.o entry. If not, then all the other modules on which
                      that one depends are not being loaded automagically. You'll need to run a
                      depmod before the insmod command for this to work. At least, I hope that's
                      all there is to it. :)

                      -Daniel


                      On Fri, 12 Jan 2001 rajeeva@...-labs.com wrote:

                      > Here are the unresoved symbols I get
                      >
                      > Thanks,
                      >
                      > rajeev

                      --
                      T. Daniel Crawford Department of Chemistry
                      crawdad@... Virginia Tech
                      www.chem.vt.edu/chem-dept/crawford Voice: 540-231-7760 FAX: 540-231-3255
                    • rajeeva@research.bell-labs.com
                      There is an entry for maestro-3 card in modules.dep. And I am getting unresolved symbols in all those dependent modules as well. Any idea what could be wrong
                      Message 10 of 21 , Jan 14, 2001
                        There is an entry for maestro-3 card in modules.dep. And I am getting
                        unresolved symbols in all those dependent modules as well. Any idea
                        what could be wrong here.

                        Thanks,

                        rajeev



                        --- In linux-dell-laptops@egroups.com, "T. Daniel Crawford"
                        <crawdad@v...> wrote:
                        > Take a look at /lib/modules/2.2.16-23/modules.dep and see if there's
                        a
                        > snd-card-maestero3.o entry. If not, then all the other modules on
                        which
                        > that one depends are not being loaded automagically. You'll need to
                        run a
                        > depmod before the insmod command for this to work. At least, I hope
                        that's
                        > all there is to it. :)
                        >
                        > -Daniel
                        >
                        >
                        > On Fri, 12 Jan 2001 rajeeva@r... wrote:
                        >
                        > > Here are the unresoved symbols I get
                        > >
                        > > Thanks,
                        > >
                        > > rajeev
                        >
                        > --
                        > T. Daniel Crawford Department of Chemistry
                        > crawdad@v... Virginia Tech
                        > www.chem.vt.edu/chem-dept/crawford Voice: 540-231-7760 FAX:
                        540-231-3255
                      • T. Daniel Crawford
                        ... Rajeev, I took another look at your post in which you listed the unresolved symbols for snd-card-maestro3 and I have two questions: (1) The symbol names
                        Message 11 of 21 , Jan 15, 2001
                          On Sun, 14 Jan 2001 rajeeva@...-labs.com wrote:

                          > There is an entry for maestro-3 card in modules.dep. And I am getting
                          > unresolved symbols in all those dependent modules as well. Any idea
                          > what could be wrong here.
                          >
                          > Thanks,
                          >
                          > rajeev
                          >

                          Rajeev,

                          I took another look at your post in which you listed the unresolved symbols
                          for snd-card-maestro3 and I have two questions:

                          (1) The symbol names all have an "smp" modifier. For example, one of the
                          symbols is: snd_register_ioport_Rsmp_37c19a3c. Now, in my also-driver
                          package, I find a symbol snd_register_ioport_R37c19a3c in the module snd.o.
                          Did you somehow compile the alsa-driver package with SMP support turned on?
                          If so, do you actually have an smp laptop? If you don't, you'll probably
                          need to recompile the also code without smp modules.

                          (2) What happens if you try to insmod snd.o? That's a low-level module
                          that doesn't seem to be loaded first automatically.

                          We should be able to figure this out soon!

                          -Daniel

                          --
                          T. Daniel Crawford Department of Chemistry
                          crawdad@... Virginia Tech
                          www.chem.vt.edu/chem-dept/crawford Voice: 540-231-7760 FAX: 540-231-3255
                        • wolf_michael@yahoo.com
                          I believe I did exactly these. All was well until # /etc/rc.d/init.d/alsasound restart Shutting down sound driver: alsactl: No soundcards found... done
                          Message 12 of 21 , Jan 19, 2001
                            I believe I did exactly these. All was well until

                            # /etc/rc.d/init.d/alsasound restart
                            Shutting down sound driver: alsactl: No soundcards found...
                            done
                            Starting sound driver: snd-card-maestro3 done
                            No mixer config in /etc/asound.conf, you have to unmute your card!
                            #

                            Then I try to run 'alsamixer' but fail with
                            alsamixer: failed to open mixer #0/#0: No such file or directory

                            And running gmix is hardly better -- I just get a diagnostic message
                            saying no mixers found, make sure you have sound support compiled into
                            the kernel. I'm running RedHat7.0 fresh out of the box, basically.

                            Thoughts? Help?

                            Thanks,

                            Michael

                            --- In linux-dell-laptops@egroups.com, brianhef-egroups@h... wrote:
                            > The latest ALSA drivers (vesion 5.10) work well with the Maestro3
                            > sound chip in my i8000 running Redhat 7.
                            > Here is what I did to make it work.
                            >
                            > First, downloaded all three of theses file from alsa-project.org:
                            > ftp://ftp.alsa-project.org/pub/driver/alsa-driver-0.5.10.tar.bz2
                            > ftp://ftp.alsa-project.org/pub/lib/alsa-lib-0.5.10.tar.bz2
                            > ftp://ftp.alsa-project.org/pub/utils/alsa-utils-0.5.10.tar.bz2
                            >
                            > #untarred the files:
                            > tar -Ixvf alsa-driver-0.5.10.tar.bz2
                            > tar -Ixvf alsa-libs-0.5.10.tar.bz2
                            > tar -Ixvf alsa-utils-0.5.10.tar.bz2
                            >
                            > #configure,make, and install:
                            > cd alsa-driver-0.5.10; ./configure; make; su -c 'make install'
                            > cd alsa-libs-0.5.10; ./configure; make; su -c 'make install'
                            > cd alsa-utils-0.5.10; ./configure; make; su -c 'make install'
                            >
                            > added these lines to /etc/modules.conf (as root user):
                            > #lines for alsa sound drivers
                            > alias char-major-116 snd
                            > alias char-major-14 soundcore
                            > alias snd-minor-oss-0 snd-mixer
                            > alias snd-minor-oss-3 snd-pcm1-oss
                            > alias snd-minor-oss-4 snd-pcm1-oss
                            > alias snd-minor-oss-5 snd-pcm1-oss
                            > alias snd-minor-oss-12 snd-pcm1-oss
                            > alias snd-card-0 snd-card-maestro3
                            > alias sound-service-1-12 snd-pcm-oss
                            >
                            > In order to make the sound card work after resuming from suspend I
                            > created (as root user) a file /etc/sysconfig/apm-scripts/apmcontinue
                            > with these lines :
                            > /etc/rc.d/init.d/alsasound restart
                            > /sbin/modprobe snd-mixer-oss
                            > /sbin/modprobe snd-pcm-oss
                            >
                            > To start the sound modules, run (as root):
                            > /etc/rc.d/init.d/alsasound restart
                            >
                            > I think the /etc/rc.d/init.d/alsasound script (and maybe the
                            > apmcontinue script) is Redhat-specific. I'm not sure how best to load
                            > and unload the modules in other linux distrubtions, but it's probably
                            > in the the alsa documentation.
                            >
                            > Most sound application I've tried work fine. I can record with a
                            > microphone, play cd's, play soundfiles with mpg123 and xmms and mix
                            > with the mixer. The gnome sound monitor applet and Extrace waveform
                            > display aren't working for me, and the built-in physical
                            > volume-control buttons on the Inspiron 8000 don't work either. Overall
                            > the system is very usable, though.
                          • Jan Marius Evang
                            I had the same problem. After rebooting, the problem was gone MArius ... From: To: Sent: Saturday,
                            Message 13 of 21 , Jan 20, 2001
                              I had the same problem.

                              After rebooting, the problem was gone

                              MArius
                              ----- Original Message -----
                              From: <wolf_michael@...>
                              To: <linux-dell-laptops@egroups.com>
                              Sent: Saturday, January 20, 2001 5:14 AM
                              Subject: [linux-dell-laptops] Re: Maestro 3 works with latest ALSA drivers


                              > I believe I did exactly these. All was well until
                              >
                              > # /etc/rc.d/init.d/alsasound restart
                              > Shutting down sound driver: alsactl: No soundcards found...
                              > done
                              > Starting sound driver: snd-card-maestro3 done
                              > No mixer config in /etc/asound.conf, you have to unmute your card!
                              > #
                              >
                              > Then I try to run 'alsamixer' but fail with
                              > alsamixer: failed to open mixer #0/#0: No such file or directory
                              >
                              > And running gmix is hardly better -- I just get a diagnostic message
                              > saying no mixers found, make sure you have sound support compiled into
                              > the kernel. I'm running RedHat7.0 fresh out of the box, basically.
                              >
                              > Thoughts? Help?
                              >
                              > Thanks,
                              >
                              > Michael
                              >
                              > --- In linux-dell-laptops@egroups.com, brianhef-egroups@h... wrote:
                              > > The latest ALSA drivers (vesion 5.10) work well with the Maestro3
                              > > sound chip in my i8000 running Redhat 7.
                              > > Here is what I did to make it work.
                              > >
                              > > First, downloaded all three of theses file from alsa-project.org:
                              > > ftp://ftp.alsa-project.org/pub/driver/alsa-driver-0.5.10.tar.bz2
                              > > ftp://ftp.alsa-project.org/pub/lib/alsa-lib-0.5.10.tar.bz2
                              > > ftp://ftp.alsa-project.org/pub/utils/alsa-utils-0.5.10.tar.bz2
                              > >
                              > > #untarred the files:
                              > > tar -Ixvf alsa-driver-0.5.10.tar.bz2
                              > > tar -Ixvf alsa-libs-0.5.10.tar.bz2
                              > > tar -Ixvf alsa-utils-0.5.10.tar.bz2
                              > >
                              > > #configure,make, and install:
                              > > cd alsa-driver-0.5.10; ./configure; make; su -c 'make install'
                              > > cd alsa-libs-0.5.10; ./configure; make; su -c 'make install'
                              > > cd alsa-utils-0.5.10; ./configure; make; su -c 'make install'
                              > >
                              > > added these lines to /etc/modules.conf (as root user):
                              > > #lines for alsa sound drivers
                              > > alias char-major-116 snd
                              > > alias char-major-14 soundcore
                              > > alias snd-minor-oss-0 snd-mixer
                              > > alias snd-minor-oss-3 snd-pcm1-oss
                              > > alias snd-minor-oss-4 snd-pcm1-oss
                              > > alias snd-minor-oss-5 snd-pcm1-oss
                              > > alias snd-minor-oss-12 snd-pcm1-oss
                              > > alias snd-card-0 snd-card-maestro3
                              > > alias sound-service-1-12 snd-pcm-oss
                              > >
                              > > In order to make the sound card work after resuming from suspend I
                              > > created (as root user) a file /etc/sysconfig/apm-scripts/apmcontinue
                              > > with these lines :
                              > > /etc/rc.d/init.d/alsasound restart
                              > > /sbin/modprobe snd-mixer-oss
                              > > /sbin/modprobe snd-pcm-oss
                              > >
                              > > To start the sound modules, run (as root):
                              > > /etc/rc.d/init.d/alsasound restart
                              > >
                              > > I think the /etc/rc.d/init.d/alsasound script (and maybe the
                              > > apmcontinue script) is Redhat-specific. I'm not sure how best to load
                              > > and unload the modules in other linux distrubtions, but it's probably
                              > > in the the alsa documentation.
                              > >
                              > > Most sound application I've tried work fine. I can record with a
                              > > microphone, play cd's, play soundfiles with mpg123 and xmms and mix
                              > > with the mixer. The gnome sound monitor applet and Extrace waveform
                              > > display aren't working for me, and the built-in physical
                              > > volume-control buttons on the Inspiron 8000 don't work either. Overall
                              > > the system is very usable, though.
                              >
                              >
                              > --------------------------------------------------------------
                              > Please post your X config files in the group links or database
                            • Brian Hefferan
                              Maybe your mixer module isn t loaded. Try this as root: /etc/rc.d/init.d/alsasound restart /sbin/modprobe snd-mixer-oss /sbin/modprobe snd-pcm-oss Then see if
                              Message 14 of 21 , Jan 20, 2001
                                Maybe your mixer module isn't loaded. Try this as root:

                                /etc/rc.d/init.d/alsasound restart
                                /sbin/modprobe snd-mixer-oss
                                /sbin/modprobe snd-pcm-oss

                                Then see if you can unmute the mixer.

                                I put these same commands in my apmcontinue script, but sometimes I
                                need to run them after rebooting or else the sound doesn't work.

                                --Brian

                                --- In linux-dell-laptops@egroups.com, wolf_michael@y... wrote:
                                > I believe I did exactly these. All was well until
                                >
                                > # /etc/rc.d/init.d/alsasound restart
                                > Shutting down sound driver: alsactl: No soundcards found...
                                > done
                                > Starting sound driver: snd-card-maestro3 done
                                > No mixer config in /etc/asound.conf, you have to unmute your card!
                                > #
                                >
                                > Then I try to run 'alsamixer' but fail with
                                > alsamixer: failed to open mixer #0/#0: No such file or directory
                                >
                                > And running gmix is hardly better -- I just get a diagnostic message
                                > saying no mixers found, make sure you have sound support compiled
                                into
                                > the kernel. I'm running RedHat7.0 fresh out of the box, basically.
                                >
                                > Thoughts? Help?
                                >
                                > Thanks,
                                >
                                > Michael
                                >
                                > --- In linux-dell-laptops@egroups.com, brianhef-egroups@h... wrote:
                                > > The latest ALSA drivers (vesion 5.10) work well with the Maestro3
                                > > sound chip in my i8000 running Redhat 7.
                                > > Here is what I did to make it work.
                                > >
                                > > First, downloaded all three of theses file from alsa-project.org:
                                > > ftp://ftp.alsa-project.org/pub/driver/alsa-driver-0.5.10.tar.bz2
                                > > ftp://ftp.alsa-project.org/pub/lib/alsa-lib-0.5.10.tar.bz2
                                > > ftp://ftp.alsa-project.org/pub/utils/alsa-utils-0.5.10.tar.bz2
                                > >
                                > > #untarred the files:
                                > > tar -Ixvf alsa-driver-0.5.10.tar.bz2
                                > > tar -Ixvf alsa-libs-0.5.10.tar.bz2
                                > > tar -Ixvf alsa-utils-0.5.10.tar.bz2
                                > >
                                > > #configure,make, and install:
                                > > cd alsa-driver-0.5.10; ./configure; make; su -c 'make install'
                                > > cd alsa-libs-0.5.10; ./configure; make; su -c 'make install'
                                > > cd alsa-utils-0.5.10; ./configure; make; su -c 'make install'
                                > >
                                > > added these lines to /etc/modules.conf (as root user):
                                > > #lines for alsa sound drivers
                                > > alias char-major-116 snd
                                > > alias char-major-14 soundcore
                                > > alias snd-minor-oss-0 snd-mixer
                                > > alias snd-minor-oss-3 snd-pcm1-oss
                                > > alias snd-minor-oss-4 snd-pcm1-oss
                                > > alias snd-minor-oss-5 snd-pcm1-oss
                                > > alias snd-minor-oss-12 snd-pcm1-oss
                                > > alias snd-card-0 snd-card-maestro3
                                > > alias sound-service-1-12 snd-pcm-oss
                                > >
                                > > In order to make the sound card work after resuming from suspend
                                I
                                > > created (as root user) a file
                                /etc/sysconfig/apm-scripts/apmcontinue
                                > > with these lines :
                                > > /etc/rc.d/init.d/alsasound restart
                                > > /sbin/modprobe snd-mixer-oss
                                > > /sbin/modprobe snd-pcm-oss
                                > >
                                > > To start the sound modules, run (as root):
                                > > /etc/rc.d/init.d/alsasound restart
                                > >
                                > > I think the /etc/rc.d/init.d/alsasound script (and maybe the
                                > > apmcontinue script) is Redhat-specific. I'm not sure how best to
                                load
                                > > and unload the modules in other linux distrubtions, but it's
                                probably
                                > > in the the alsa documentation.
                                > >
                                > > Most sound application I've tried work fine. I can record with a
                                > > microphone, play cd's, play soundfiles with mpg123 and xmms and
                                mix
                                > > with the mixer. The gnome sound monitor applet and Extrace
                                waveform
                                > > display aren't working for me, and the built-in physical
                                > > volume-control buttons on the Inspiron 8000 don't work either.
                                Overall
                                > > the system is very usable, though.
                              • laseryq@yahoo.com
                                Hi, I got an error message when I compiled the alsa-driver-0.5.10. It said: wavefront.c: In function wavefront_wait : wavefront.c:307: structure has no member
                                Message 15 of 21 , Mar 25, 2001
                                  Hi,

                                  I got an error message when I compiled the alsa-driver-0.5.10.
                                  It said:

                                  wavefront.c: In function 'wavefront_wait':
                                  wavefront.c:307: structure has no member named 'loops_per_sec'

                                  Anybody know what's the problem and how to solve that?

                                  Thanks a lot.

                                  Feng

                                  --- In linux-dell-laptops@y..., brianhef-egroups@h... wrote:
                                  > The latest ALSA drivers (vesion 5.10) work well with the Maestro3
                                  > sound chip in my i8000 running Redhat 7.
                                  > Here is what I did to make it work.
                                  >
                                  > First, downloaded all three of theses file from alsa-project.org:
                                  > ftp://ftp.alsa-project.org/pub/driver/alsa-driver-0.5.10.tar.bz2
                                  > ftp://ftp.alsa-project.org/pub/lib/alsa-lib-0.5.10.tar.bz2
                                  > ftp://ftp.alsa-project.org/pub/utils/alsa-utils-0.5.10.tar.bz2
                                  >
                                  > #untarred the files:
                                  > tar -Ixvf alsa-driver-0.5.10.tar.bz2
                                  > tar -Ixvf alsa-libs-0.5.10.tar.bz2
                                  > tar -Ixvf alsa-utils-0.5.10.tar.bz2
                                  >
                                  > #configure,make, and install:
                                  > cd alsa-driver-0.5.10; ./configure; make; su -c 'make install'
                                  > cd alsa-libs-0.5.10; ./configure; make; su -c 'make install'
                                  > cd alsa-utils-0.5.10; ./configure; make; su -c 'make install'
                                  >
                                  > added these lines to /etc/modules.conf (as root user):
                                  > #lines for alsa sound drivers
                                  > alias char-major-116 snd
                                  > alias char-major-14 soundcore
                                  > alias snd-minor-oss-0 snd-mixer
                                  > alias snd-minor-oss-3 snd-pcm1-oss
                                  > alias snd-minor-oss-4 snd-pcm1-oss
                                  > alias snd-minor-oss-5 snd-pcm1-oss
                                  > alias snd-minor-oss-12 snd-pcm1-oss
                                  > alias snd-card-0 snd-card-maestro3
                                  > alias sound-service-1-12 snd-pcm-oss
                                  >
                                  > In order to make the sound card work after resuming from suspend I
                                  > created (as root user) a file /etc/sysconfig/apm-scripts/apmcontinue
                                  > with these lines :
                                  > /etc/rc.d/init.d/alsasound restart
                                  > /sbin/modprobe snd-mixer-oss
                                  > /sbin/modprobe snd-pcm-oss
                                  >
                                  > To start the sound modules, run (as root):
                                  > /etc/rc.d/init.d/alsasound restart
                                  >
                                  > I think the /etc/rc.d/init.d/alsasound script (and maybe the
                                  > apmcontinue script) is Redhat-specific. I'm not sure how best to
                                  load
                                  > and unload the modules in other linux distrubtions, but it's
                                  probably
                                  > in the the alsa documentation.
                                  >
                                  > Most sound application I've tried work fine. I can record with a
                                  > microphone, play cd's, play soundfiles with mpg123 and xmms and mix
                                  > with the mixer. The gnome sound monitor applet and Extrace waveform
                                  > display aren't working for me, and the built-in physical
                                  > volume-control buttons on the Inspiron 8000 don't work either.
                                  Overall
                                  > the system is very usable, though.
                                • Steve Cassidy
                                  ... I got this when compiling an older version of alsa on debian potato. loops_per_sec isn t defined in 2.2.18pre21 but wavefront.c now contains the line: #if
                                  Message 16 of 21 , Apr 1, 2001
                                    On Monday 26 March 2001 14:25, laseryq@... wrote:
                                    > Hi,
                                    >
                                    > I got an error message when I compiled the alsa-driver-0.5.10.
                                    > It said:
                                    >
                                    > wavefront.c: In function 'wavefront_wait':
                                    > wavefront.c:307: structure has no member named 'loops_per_sec'
                                    >
                                    I got this when compiling an older version of alsa on debian potato.
                                    loops_per_sec isn't defined in 2.2.18pre21 but wavefront.c now contains the
                                    line:

                                    #if LINUX_VERSION_CODE >= KERNEL_VERSION(2,2,18) && LINUX_VERSION_CODE <
                                    KERNEL_VERSION(2,3,0)
                                    #define loops_per_sec loops_per_jiffy*HZ
                                    #endif

                                    you might need to check that this is being triggered.

                                    I just built the newer alsa module and now get this error when trying to
                                    start things up:

                                    Starting sound driver: snd-card-maestro3
                                    /lib/modules/2.2.18pre21/misc/snd-card-maestro3.o: init_module: Device or
                                    resource busy
                                    Hint: this error can be caused by incorrect module parameters, including
                                    invalid IO or IRQ parameters

                                    the parameters referred to in the earlier message didn't include IRQ and IO
                                    parameters, are the required and what might sensible values be?

                                    Steve
                                  Your message has been successfully submitted and would be delivered to recipients shortly.