Re: [linux-dell-laptops] How to get CDROM to install RH6.1 on Latitude CPx?
- Well this sounds more like you should be setting it up with the text
install rather then the Graphics install. You can supposedly do a
graphics install by typing "vga=792" or a similar number at the lilo
prompt. The problem is the standard graphics mode for the LCD is not
If you are at UT, why don't you find a friend who can download and burn
you both RH 7.0 cd's. You must have a high connection at UT?
> I am attempting an install from scratch, no dual boot. Settings are
> to read bootable media from floppy, then CDROM, then HD. Red Hat 6.1
> CDROM shows start screen with options for regular install, upgrade,
> expert mode, etc. After choosing regular install, the usual boot up
> messages scroll by, then nothing - the screen goes blank.
> I read in the installation manual about making a PCMCIA boot floppy,
> and did so. However, my problem is that the modular bay will only
> hold the floppy drive or CDROM drive, and it is not possible to use
> both simultaneously With the PCMCIA boot floppy, progress halts at
> the point where it asks where the packages are, and gives me one
> choice: the HD! Obviously, it is somehow necessary to be able to do
> everything from the CDROM module.
> I don't mind buying Red Hat 7.0 or even some other distro, but just
> want to see if this is a problem that's even been resolved in a newer
> version, or if some other measure is required. Any help will be
> greatly appreciated.
> Please post your X config files in the group links or database
Vance Wheelock II, Software Engineer, weddingstreetjournal.com
"On the side of the software box, in the 'System Requirements' section,
it said 'Requires Windows 95 or better'. So I installed Linux."
- --- In firstname.lastname@example.org, Vance Wheelock <vance@c...>
> Well this sounds more like you should be setting it up with the textThat solved the problem! Thanks.
> install rather then the Graphics install.