Loading ...
Sorry, an error occurred while loading the content.

[linux-dell-laptops] Re: Latitude CPi R400GT + Xwin 3.3.3.1

Expand Messages
  • tcpbgp@softhome.net
    Hi Mike, ... of ... my ... Plz, can you post the Monitor, Device and Screen section of your XF86Config on the list? Cheers, Alf.
    Message 1 of 12 , Nov 5, 1999
    • 0 Attachment
      Hi Mike,

      uzanmik-@... wrote:
      > Hello, I'm Mike (i'm french) end i was made last week-end the config
      of
      > X windows for Dell Latitude Cpi R400GT and the file XF86Config is in
      my
      > HDD.

      Plz, can you post the Monitor, Device and Screen section of your
      XF86Config on the list?

      Cheers,

      Alf.
    • matias.magnusson@cacheflow.com
      Could you please send me this XF86Config cause my X is not working at all. /Matias uzanmik-@club-internet.fr wrote: original
      Message 2 of 12 , Dec 3, 1999
      • 0 Attachment
        Could you please send me this XF86Config cause my X is not working at
        all.

        /Matias

        uzanmik-@... wrote:
        original article:http://www.egroups.com/group/linux-dell-laptops/?start
        =155
        > Hello, I'm Mike (i'm french) end i was made last week-end the config
        of
        > X windows for Dell Latitude Cpi R400GT and the file XF86Config is in
        my
        > HDD.
        > Please mail me on uzanmike@... if you want it. I've got a
        > Dell and my config display on 1024x768 24 bit at 65 htz.
        > I think, that my help was very big
        > Friendly, Miko
        > Bye
        >
        >
        >
        > tbear_7-@... wrote:
        > original article:http://www.egroups.com/group/linux-dell-laptops/?sta
        rt
        > =148
        > > tcpbg-@... wrote:
        > > original article:http://www.egroups.com/group/linux-dell-laptops/?s
        ta
        > rt
        > > =135
        > > > Hi,
        > > >
        > > > I'm having troubles with the Xwindows on my a Latitude CPi R400GT
        > > > The graphic card is a Neomagic MagicMedia 256ZX with 4Mb SGRAM and
        > AGP
        > > > bus.
        > > > The XF86 server is the XF86_SVGA supplied with the XFree86
        3.3.3.1,
        > it
        > > > supports certain Neomagic Chipsets but it doesn't works with my
        > card.
        > > >
        > > > When I start xwindows the screen sets the 320x240 mode because the
        > > > Xserver doesn't recognize my chipset ("unknown NeoMagic chipset
        type
        > > > 0x0006").
        > > > I tried various XF86config files that i've found on Internet that
        > > > certain people claims to works with other NeoMagic chipsets but i
        > > can't
        > > > achieve a good result, in fact my laptop hangs totally.
        > > >
        > > > Any type of help will be welcome,
        > > >
        > > > Alf.
        > > >
        > >
        > > Alf,
        > >
        > > I'm having the same problem with my Dell. Have you managed to find
        a
        > > solution yet?
        > >
        > > Thanx
        > >
        > > Terrence
        > >
        >
      • f3668551@ppp.kornet21.net
        It works well on my laptop. Wolf ... # File generated by XConfigurator. # ********************************************************************** # Refer to the
        Message 3 of 12 , Dec 5, 1999
        • 0 Attachment
          It works well on my laptop.

          Wolf

          -----------------------------------------

          # File generated by XConfigurator.

          # **********************************************************************
          # Refer to the XF86Config(4/5) man page for details about the format of
          # this file.
          # **********************************************************************

          # **********************************************************************
          # Files section. This allows default font and rgb paths to be set
          # **********************************************************************

          Section "Files"

          # The location of the RGB database. Note, this is the name of the
          # file minus the extension (like ".txt" or ".db"). There is normally
          # no need to change the default.

          RgbPath "/usr/X11R6/lib/X11/rgb"

          # Multiple FontPath entries are allowed (they are concatenated together)
          # By default, Red Hat 6.0 and later now use a font server independent of
          # the X server to render fonts.

          FontPath "unix/:-1"

          EndSection

          # **********************************************************************
          # Server flags section.
          # **********************************************************************

          Section "ServerFlags"

          # Uncomment this to cause a core dump at the spot where a signal is
          # received. This may leave the console in an unusable state, but
          may
          # provide a better stack trace in the core dump to aid in debugging
          #NoTrapSignals

          # Uncomment this to disable the <Crtl><Alt><BS> server abort
          sequence
          # This allows clients to receive this key event.
          #DontZap

          # Uncomment this to disable the <Crtl><Alt><KP_+>/<KP_-> mode
          switching
          # sequences. This allows clients to receive these key events.
          #DontZoom

          EndSection

          # **********************************************************************
          # Input devices
          # **********************************************************************

          # **********************************************************************
          # Keyboard section
          # **********************************************************************

          Section "Keyboard"

          Protocol "Standard"

          # when using XQUEUE, comment out the above line, and uncomment the
          # following line
          #Protocol "Xqueue"

          AutoRepeat 500 5

          # Let the server do the NumLock processing. This should only be
          # required when using pre-R6 clients
          #ServerNumLock

          # Specify which keyboard LEDs can be user-controlled (eg, with
          xset(1))
          #Xleds 1 2 3

          #To set the LeftAlt to Meta, RightAlt key to ModeShift,
          #RightCtl key to Compose, and ScrollLock key to ModeLock:

          LeftAlt Meta
          RightAlt Meta
          ScrollLock Compose
          RightCtl Control

          # To disable the XKEYBOARD extension, uncomment XkbDisable.

          # XkbDisable

          # To customise the XKB settings to suit your keyboard, modify the
          # lines below (which are the defaults). For example, for a non-U.S.
          # keyboard, you will probably want to use:
          # XkbModel "pc102"
          # If you have a US Microsoft Natural keyboard, you can use:
          # XkbModel "microsoft"
          #
          # Then to change the language, change the Layout setting.
          # For example, a german layout can be obtained with:
          # XkbLayout "de"
          # or:
          # XkbLayout "de"
          # XkbVariant "nodeadkeys"
          #
          # If you'd like to switch the positions of your capslock and
          # control keys, use:
          # XkbOptions "ctrl:swapcaps"

          # These are the default XKB settings for XFree86
          # XkbRules "xfree86"
          # XkbModel "pc101"
          # XkbLayout "us"
          # XkbVariant ""
          # XkbOptions ""

          XkbKeycodes "xfree86"
          XkbTypes "default"
          XkbCompat "default"
          XkbSymbols "us(pc101)"
          XkbGeometry "pc"
          XkbRules "xfree86"
          XkbModel "pc101"
          XkbLayout "us"
          EndSection

          # **********************************************************************
          # Pointer section
          # **********************************************************************

          Section "Pointer"
          Protocol "PS/2"
          Device "/dev/mouse"

          # When using XQUEUE, comment out the above two lines, and uncomment
          # the following line.

          # Protocol "Xqueue"

          # Baudrate and SampleRate are only for some Logitech mice

          # BaudRate 9600
          # SampleRate 150

          # Emulate3Buttons is an option for 2-button Microsoft mice
          # Emulate3Timeout is the timeout in milliseconds (default is 50ms)

          Emulate3Buttons
          Emulate3Timeout 50

          # ChordMiddle is an option for some 3-button Logitech mice

          # ChordMiddle

          EndSection


          # **********************************************************************
          # Monitor section
          # **********************************************************************

          # Any number of monitor sections may be present

          Section "Monitor"

          Identifier "Samsung SyncMaster 17GLsi"
          VendorName "Unknown"
          ModelName "Unknown"

          # HorizSync is in kHz unless units are specified.
          # HorizSync may be a comma separated list of discrete values, or a
          # comma separated list of ranges of values.
          # NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S
          # USER MANUAL FOR THE CORRECT NUMBERS.

          HorizSync 30-85

          # VertRefresh is in Hz unless units are specified.
          # VertRefresh may be a comma separated list of discrete values, or a
          # comma separated list of ranges of values.
          # NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S
          # USER MANUAL FOR THE CORRECT NUMBERS.

          VertRefresh 50-120

          # Modes can be specified in two formats. A compact one-line format, or
          # a multi-line format.

          # These two are equivalent

          # ModeLine "1024x768i" 45 1024 1048 1208 1264 768 776 784 817
          Interlace

          # Mode "1024x768i"
          # DotClock 45
          # HTimings 1024 1048 1208 1264
          # VTimings 768 776 784 817
          # Flags "Interlace"
          # EndMode

          # This is a set of standard mode timings. Modes that are out of monitor
          spec
          # are automatically deleted by the server (provided the HorizSync and
          # VertRefresh lines are correct), so there's no immediate need to
          # delete mode timings (unless particular mode timings don't work on your
          # monitor). With these modes, the best standard mode that your monitor
          # and video card can support for a given resolution is automatically
          # used.

          # 640x400 @ 70 Hz, 31.5 kHz hsync
          Modeline "640x400" 25.175 640 664 760 800 400 409 411 450
          # 640x480 @ 60 Hz, 31.5 kHz hsync
          Modeline "640x480" 25.175 640 664 760 800 480 491 493 525
          # 800x600 @ 56 Hz, 35.15 kHz hsync
          ModeLine "800x600" 36 800 824 896 1024 600 601 603 625
          # 1024x768 @ 87 Hz interlaced, 35.5 kHz hsync
          Modeline "1024x768" 44.9 1024 1048 1208 1264 768 776 784 817
          Interlace

          # 640x400 @ 85 Hz, 37.86 kHz hsync
          Modeline "640x400" 31.5 640 672 736 832 400 401 404 445
          -HSync +VSync
          # 640x480 @ 72 Hz, 36.5 kHz hsync
          Modeline "640x480" 31.5 640 680 720 864 480 488 491 521
          # 640x480 @ 75 Hz, 37.50 kHz hsync
          ModeLine "640x480" 31.5 640 656 720 840 480 481 484 500
          -HSync -VSync
          # 800x600 @ 60 Hz, 37.8 kHz hsync
          Modeline "800x600" 40 800 840 968 1056 600 601 605 628
          +hsync +vsync

          # 640x480 @ 85 Hz, 43.27 kHz hsync
          Modeline "640x480" 36 640 696 752 832 480 481 484 509
          -HSync -VSync
          # 1152x864 @ 89 Hz interlaced, 44 kHz hsync
          ModeLine "1152x864" 65 1152 1168 1384 1480 864 865 875 985
          Interlace

          # 800x600 @ 72 Hz, 48.0 kHz hsync
          Modeline "800x600" 50 800 856 976 1040 600 637 643 666
          +hsync +vsync
          # 1024x768 @ 60 Hz, 48.4 kHz hsync
          Modeline "1024x768" 65 1024 1032 1176 1344 768 771 777 806
          -hsync -vsync

          # 640x480 @ 100 Hz, 53.01 kHz hsync
          Modeline "640x480" 45.8 640 672 768 864 480 488 494 530
          -HSync -VSync
          # 1152x864 @ 60 Hz, 53.5 kHz hsync
          Modeline "1152x864" 89.9 1152 1216 1472 1680 864 868 876 892
          -HSync -VSync
          # 800x600 @ 85 Hz, 55.84 kHz hsync
          Modeline "800x600" 60.75 800 864 928 1088 600 616 621 657
          -HSync -VSync

          # 1024x768 @ 70 Hz, 56.5 kHz hsync
          Modeline "1024x768" 75 1024 1048 1184 1328 768 771 777 806
          -hsync -vsync
          # 1280x1024 @ 87 Hz interlaced, 51 kHz hsync
          Modeline "1280x1024" 80 1280 1296 1512 1568 1024 1025 1037 1165
          Interlace

          # 800x600 @ 100 Hz, 64.02 kHz hsync
          Modeline "800x600" 69.65 800 864 928 1088 600 604 610 640
          -HSync -VSync
          # 1024x768 @ 76 Hz, 62.5 kHz hsync
          Modeline "1024x768" 85 1024 1032 1152 1360 768 784 787 823
          # 1152x864 @ 70 Hz, 62.4 kHz hsync
          Modeline "1152x864" 92 1152 1208 1368 1474 864 865 875 895
          # 1280x1024 @ 61 Hz, 64.2 kHz hsync
          Modeline "1280x1024" 110 1280 1328 1512 1712 1024 1025 1028 1054

          # 1024x768 @ 85 Hz, 70.24 kHz hsync
          Modeline "1024x768" 98.9 1024 1056 1216 1408 768 782 788 822
          -HSync -VSync
          # 1152x864 @ 78 Hz, 70.8 kHz hsync
          Modeline "1152x864" 110 1152 1240 1324 1552 864 864 876 908

          # 1280x1024 @ 70 Hz, 74.59 kHz hsync
          Modeline "1280x1024" 126.5 1280 1312 1472 1696 1024 1032 1040 1068
          -HSync -VSync
          # 1600x1200 @ 60Hz, 75.00 kHz hsync
          Modeline "1600x1200" 162 1600 1664 1856 2160 1200 1201 1204 1250
          +HSync +VSync
          # 1152x864 @ 84 Hz, 76.0 kHz hsync
          Modeline "1152x864" 135 1152 1464 1592 1776 864 864 876 908

          # 1280x1024 @ 74 Hz, 78.85 kHz hsync
          Modeline "1280x1024" 135 1280 1312 1456 1712 1024 1027 1030 1064

          # 1024x768 @ 100Hz, 80.21 kHz hsync
          Modeline "1024x768" 115.5 1024 1056 1248 1440 768 771 781 802
          -HSync -VSync
          # 1280x1024 @ 76 Hz, 81.13 kHz hsync
          Modeline "1280x1024" 135 1280 1312 1416 1664 1024 1027 1030 1064

          # 1600x1200 @ 70 Hz, 87.50 kHz hsync
          Modeline "1600x1200" 189 1600 1664 1856 2160 1200 1201 1204 1250
          -HSync -VSync
          # 1152x864 @ 100 Hz, 89.62 kHz hsync
          Modeline "1152x864" 137.65 1152 1184 1312 1536 864 866 885 902
          -HSync -VSync
          # 1280x1024 @ 85 Hz, 91.15 kHz hsync
          Modeline "1280x1024" 157.5 1280 1344 1504 1728 1024 1025 1028 1072
          +HSync +VSync
          # 1600x1200 @ 75 Hz, 93.75 kHz hsync
          Modeline "1600x1200" 202.5 1600 1664 1856 2160 1200 1201 1204 1250
          +HSync +VSync
          # 1600x1200 @ 85 Hz, 105.77 kHz hsync
          Modeline "1600x1200" 220 1600 1616 1808 2080 1200 1204 1207 1244
          +HSync +VSync
          # 1280x1024 @ 100 Hz, 107.16 kHz hsync
          Modeline "1280x1024" 181.75 1280 1312 1440 1696 1024 1031 1046 1072
          -HSync -VSync

          # 1800x1440 @ 64Hz, 96.15 kHz hsync
          ModeLine "1800X1440" 230 1800 1896 2088 2392 1440 1441 1444 1490
          +HSync +VSync
          # 1800x1440 @ 70Hz, 104.52 kHz hsync
          ModeLine "1800X1440" 250 1800 1896 2088 2392 1440 1441 1444 1490
          +HSync +VSync

          # 512x384 @ 78 Hz, 31.50 kHz hsync
          Modeline "512x384" 20.160 512 528 592 640 384 385 388 404
          -HSync -VSync
          # 512x384 @ 85 Hz, 34.38 kHz hsync
          Modeline "512x384" 22 512 528 592 640 384 385 388 404
          -HSync -VSync

          # Low-res Doublescan modes
          # If your chipset does not support doublescan, you get a 'squashed'
          # resolution like 320x400.

          # 320x200 @ 70 Hz, 31.5 kHz hsync, 8:5 aspect ratio
          Modeline "320x200" 12.588 320 336 384 400 200 204 205 225
          Doublescan
          # 320x240 @ 60 Hz, 31.5 kHz hsync, 4:3 aspect ratio
          Modeline "320x240" 12.588 320 336 384 400 240 245 246 262
          Doublescan
          # 320x240 @ 72 Hz, 36.5 kHz hsync
          Modeline "320x240" 15.750 320 336 384 400 240 244 246 262
          Doublescan
          # 400x300 @ 56 Hz, 35.2 kHz hsync, 4:3 aspect ratio
          ModeLine "400x300" 18 400 416 448 512 300 301 302 312
          Doublescan
          # 400x300 @ 60 Hz, 37.8 kHz hsync
          Modeline "400x300" 20 400 416 480 528 300 301 303 314
          Doublescan
          # 400x300 @ 72 Hz, 48.0 kHz hsync
          Modeline "400x300" 25 400 424 488 520 300 319 322 333
          Doublescan
          # 480x300 @ 56 Hz, 35.2 kHz hsync, 8:5 aspect ratio
          ModeLine "480x300" 21.656 480 496 536 616 300 301 302 312
          Doublescan
          # 480x300 @ 60 Hz, 37.8 kHz hsync
          Modeline "480x300" 23.890 480 496 576 632 300 301 303 314
          Doublescan
          # 480x300 @ 63 Hz, 39.6 kHz hsync
          Modeline "480x300" 25 480 496 576 632 300 301 303 314
          Doublescan
          # 480x300 @ 72 Hz, 48.0 kHz hsync
          Modeline "480x300" 29.952 480 504 584 624 300 319 322 333
          Doublescan

          EndSection


          # **********************************************************************
          # Graphics device section
          # **********************************************************************

          # Any number of graphics device sections may be present

          Section "Device"
          Identifier "Generic VGA"
          VendorName "Unknown"
          BoardName "Unknown"
          Chipset "generic"

          # VideoRam 256

          # Clocks 25.2 28.3

          EndSection

          # Device configured by Xconfigurator:

          Section "Device"
          Identifier "Neomagic Corporation|[MagicGraph 256ZX]"
          VendorName "Unknown"
          BoardName "Unknown"
          VideoRam 4096
          Chipset "NM2200"
          # IOBase 0xfea00000
          # MemBase 0xfd000000
          # VideoRam 2048
          # DacSpeed 90
          # Option "linear"
          # Option "nolinear"
          # Option "sw_cursor"
          # Option "hw_cursor"
          # Option "no_accel"
          # Option "intern_disp"
          # Option "extern_disp"
          # Option "mmio"
          # Option "no_mmio"
          # Option "lcd_center"
          # Option "no_stretch"
          # Insert Clocks lines here if appropriate
          EndSection


          # **********************************************************************
          # Screen sections
          # **********************************************************************

          # The Colour SVGA server

          Section "Screen"
          Driver "svga"
          # Use Device "Generic VGA" for Standard VGA 320x200x256
          #Device "Generic VGA"
          Device "Neomagic Corporation|[MagicGraph 256ZX]"
          Monitor "Samsung SyncMaster 17GLsi"
          Subsection "Display"
          Depth 8
          # Omit the Modes line for the "Generic VGA" device
          Modes "1024x768" "1152x864" "1280x1024"
          ViewPort 0 0
          Virtual 1024 768
          EndSubsection
          Subsection "Display"
          Depth 16
          Modes "1024x768" "1152x864" "1280x1024"
          ViewPort 0 0
          EndSubsection
          Subsection "Display"
          Depth 32
          Modes "800x600" "1024x768" "1152x864"
          ViewPort 0 0
          EndSubsection
          EndSection

          # The 16-color VGA server

          Section "Screen"
          Driver "vga16"
          Device "Generic VGA"
          Monitor "Samsung SyncMaster 17GLsi"
          Subsection "Display"
          Modes "640x480" "800x600"
          ViewPort 0 0
          EndSubsection
          EndSection

          # The Mono server

          Section "Screen"
          Driver "vga2"
          Device "Generic VGA"
          Monitor "Samsung SyncMaster 17GLsi"
          Subsection "Display"
          Modes "640x480" "800x600"
          ViewPort 0 0
          EndSubsection
          EndSection

          # The accelerated servers (S3, Mach32, Mach8, 8514, P9000, AGX, W32,
          Mach64
          # I128, and S3V)
          Section "Screen"
          Driver "accel"
          Device "Neomagic Corporation|[MagicGraph 256ZX]"
          Monitor "Samsung SyncMaster 17GLsi"
          Subsection "Display"
          Depth 8
          Modes "1024x768" "1152x864" "1280x1024"
          ViewPort 0 0
          Virtual 1024 768
          EndSubsection
          Subsection "Display"
          Depth 16
          Modes "1024x768" "1152x864" "1280x1024"
          ViewPort 0 0
          EndSubsection
          Subsection "Display"
          Depth 32
          Modes "800x600" "1024x768" "1152x864"
          ViewPort 0 0
          EndSubsection
          EndSection
        Your message has been successfully submitted and would be delivered to recipients shortly.