Loading ...
Sorry, an error occurred while loading the content.

1600x1200 on Inspiron 5000e (my own struggles... with logs)

Expand Messages
  • Christopher Smith
    So, I ve tried just about every combination I could think of. I ve tried downloading the files provided on the egroups page. I ve tried a variety of XF86Config
    Message 1 of 2 , Nov 3, 2000
    • 0 Attachment
      So, I've tried just about every combination I could think of. I've tried downloading the files provided on the egroups page. I've tried a variety of XF86Config files both of my own creation, from the
      site, and those that people have sent me.

      NO DICE.

      I always end up with a nice looking 1024x768 screen, rather than a 1600x1200 screen.

      So, I've logged the behavior. Please find attached to logs of what X pumps out when I start out. It appears as though the source of my misery is the DDC detection of my LCD's horizontal refresh rate.
      Should I just disable DDC (and if so how does one do that)?

      What I can't understand is why everyone else ISN'T having these problems. Sigh.

      --Chris
    • lsarang@cs.sunysb.edu
      Do you have the following lines in u re XF86Config? The Modeline line is what made the difference for me! I couldn t get 1400x1050 on my laptop.. For your
      Message 2 of 2 , Nov 11, 2000
      • 0 Attachment
        Do you have the following lines in u're XF86Config? The "Modeline"
        line is what made the difference for me! I couldn't get 1400x1050 on
        my laptop.. For your case, try this modeline :

        Modeline "1600x1200" 162 1600 1664 1856 2160 1200 1201 1204 1250
        -hsync -vsync

        replace the modeline below by the above one..

        -sarang

        Section "Monitor"
        Identifier "Monitor0"
        VendorName "Monitor Vendor"
        ModelName "Monitor Model"
        HorizSync 28-110
        VertRefresh 50-90
        Option "DPMS"
        Modeline "1400x1050" 107.85 1400 1450 1500 1999 1050 1058 1070 1150

        EndSection

        --- In linux-dell-laptops@egroups.com, Christopher Smith <x@x...>
        wrote:
        > So, I've tried just about every combination I could think of. I've
        tried downloading the files provided on the egroups page. I've tried a
        variety of XF86Config files both of my own creation, from the
        > site, and those that people have sent me.
        >
        > NO DICE.
        >
        > I always end up with a nice looking 1024x768 screen, rather than a
        1600x1200 screen.
        >
        > So, I've logged the behavior. Please find attached to logs of what X
        pumps out when I start out. It appears as though the source of my
        misery is the DDC detection of my LCD's horizontal refresh rate.
        > Should I just disable DDC (and if so how does one do that)?
        >
        > What I can't understand is why everyone else ISN'T having these
        problems. Sigh.
        >
        > --Chris
        >
        >
        >
        >
        > XFree86 Version 4.0.1c / X Window System
        > (protocol Version 11, revision 0, vendor release 6400)
        > Release Date: 28 August 2000
        > If the server is older than 6-12 months, or if your card is newer
        > than
        > the above date, look for a newer version before reporting
        > problems. (see http://www.XFree86.Org/FAQ)
        > Operating System: Linux 2.2.16-22 i686 [ELF]
        > Module Loader present
        > (==) Log file:
        > "/var/log/XFree86.0.log", Time: Mon Oct 16 22:31:52 2000
        > (==) Using config file: "/etc/X11/XF86Config-4"
        > Markers: (--) probed, (**) from config file, (==) default setting,
        > (++) from command
        > line, (!!) notice, (II) informational,
        > (WW) warning, (EE) error, (??) unknown.
        > (==) ServerLayout "Anaconda Configured"
        > (**) |-->Screen "Screen0" (0)
        > (**) | |-->Monitor "Monitor0"
        > (**) |
        > |-->Device "ATI Rage 128 Mobility"
        > (**) |-->Input Device "Mouse0"
        > (**) |-->Input Device "Keyboard0"
        > (**) XKB: rules: "xfree86"
        > (**) XKB: model: "pc104"
        > (**) XKB: layout: "us"
        > (WW) Option "XkbVariant"
        > requires an string value
        > (WW) Option "XkbOptions" requires an string value
        > (WW) The directory "/usr/X11R6/lib/X11/fonts/TrueType" does not
        exist.
        > Entry deleted from font path.
        > (**) FontPath set to
        > "unix/:7100"
        > (**) RgbPath set to "/usr/X11R6/lib/X11/rgb"
        > (==) ModulePath set to "/usr/X11R6/lib/modules"
        > (--) using VT number 7
        >
        > (II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a
        > (II) Module
        > bitmap: vendor="The XFree86 Project"
        > compiled for 4.0.1c, module version = 1.0.0
        > (II) Loading /usr/X11R6/lib/modules/libpcidata.a
        > (II) Module pcidata: vendor="The XFree86 Project"
        > compiled for
        > 4.0.1c, module version = 0.1.0
        > (II) Loading /usr/X11R6/lib/modules/libscanpci.a
        > (II) Module scanpci: vendor="The XFree86 Project"
        > compiled for 4.0.1c, module version = 0.1.0
        > (II) Unloading
        > /usr/X11R6/lib/modules/libscanpci.a
        > (--) PCI:*(1:0:0) ATI Rage 128 Mobility LF rev 2, Mem @
        0xf8000000/26, 0xf4000000/14, I/O @ 0x2000/8
        > (II) Loading /usr/X11R6/lib/modules/extensions/libGLcore.a
        > (II)
        > Module GLcore: vendor="The XFree86 Project"
        > compiled for 4.0.1c, module version = 1.0.0
        > (II) Loading /usr/X11R6/lib/modules/extensions/libdbe.a
        > (II) Module dbe: vendor="The XFree86 Project"
        > compiled
        > for 4.0.1c, module version = 1.0.0
        > (II) Loading /usr/X11R6/lib/modules/extensions/libdri.a
        > (II) Module dri: vendor="The XFree86 Project"
        > compiled for 4.0.1c, module version = 1.0.0
        > (II) Loading
        > /usr/X11R6/lib/modules/linux/libdrm.a
        > (II) Module drm: vendor="The XFree86 Project"
        > compiled for 4.0.1c, module version = 1.0.0
        > (II) Loading /usr/X11R6/lib/modules/extensions/libextmod.a
        > (II) Module
        > extmod: vendor="The XFree86 Project"
        > compiled for 4.0.1c, module version = 1.0.0
        > (II) Loading /usr/X11R6/lib/modules/linux/libfbdevhw.a
        > (II) Module fbdevhw: vendor="The XFree86 Project"
        > compiled for
        > 4.0.1c, module version = 0.0.1
        > (II) Loading /usr/X11R6/lib/modules/extensions/libpex5.a
        > (II) Module pex5: vendor="The XFree86 Project"
        > compiled for 4.0.1c, module version = 1.0.0
        > (II) Loading
        > /usr/X11R6/lib/modules/extensions/libglx.a
        > (II) Module glx: vendor="The XFree86 Project"
        > compiled for 4.0.1c, module version = 1.0.0
        > (II) Loading /usr/X11R6/lib/modules/extensions/librecord.a
        > (II)
        > Module record: vendor="The XFree86 Project"
        > compiled for 4.0.1c, module version = 1.13.0
        > (II) Loading /usr/X11R6/lib/modules/extensions/libxie.a
        > (II) Module xie: vendor="The XFree86
        > Project"
        > compiled for 4.0.1c, module version = 1.0.0
        > (II) Loading /usr/X11R6/lib/modules/drivers/r128_drv.o
        > (II) Module r128: vendor="The XFree86 Project"
        > compiled for 4.0.1c, module version =
        > 3.1.1
        > (II) Loading /usr/X11R6/lib/modules/input/mouse_drv.o
        > (II) Module mouse: vendor="The XFree86 Project"
        > compiled for 4.0.1c, module version = 1.0.0
        > (II) r128: Driver for ATI Rage 128 chipset: ATI
        > Rage 128 RE (PCI),
        > ATI Rage 128 RF (AGP), ATI Rage 128 RK (PCI), ATI Rage 128 RL
        (AGP),
        > ATI Rage 128 Pro PF (AGP), ATI Rage 128 Mobility LE (PCI),
        > ATI Rage 128 Mobility LF (AGP), ATI Rage 128
        > Mobility MF (AGP),
        > ATI Rage 128 Mobility ML (AGP)
        > (--) Assigning device section with no busID to primary device
        > (--) Chipset ATI Rage 128 Mobility LF (AGP) found
        > (II) Loading
        > /usr/X11R6/lib/modules/libvgahw.a
        > (II) Module vgahw: vendor="The XFree86 Project"
        > compiled for 4.0.1c, module version = 0.1.0
        > (II) r128(0): PCI bus 1 card 0 func 0
        > (**) r128(0): Depth 16, (--)
        > framebuffer bpp 16
        > (II) r128(0): Pixel depth = 16 bits stored in 2 bytes (16 bpp
        pixmaps)
        > (==) r128(0): Default visual is TrueColor
        > (==) r128(0): RGB weight 565
        > (II) r128(0): Using 6 bits per RGB (8
        > bit DAC)
        > (--) r128(0): Chipset: "ATI Rage 128 Mobility LF (AGP)" (ChipID =
        0x4c46)
        > (--) r128(0): Linear framebuffer at 0xf8000000
        > (--) r128(0): MMIO registers at 0xf4000000
        > (--) r128(0): VideoRAM:
        > 16384 kByte (128-bit SDR SGRAM 1:1)
        > (II) r128(0): Using flat panel for display
        > (WW) r128(0): Video BIOS not detected in PCI space!
        > (WW) r128(0): Attempting to read Video BIOS from legacy ISA
        > space!
        > (II) r128(0): Panel size: 1600x1200
        > (II) r128(0): Panel ID: Toshiba LTM15C162
        > (II) r128(0): Panel Type: Color, Single, TFT
        > (II) r128(0): Panel Interface: LVDS
        > (II) r128(0): PLL
        > parameters: rf=2700 rd=60 min=12500 max=25000; xclk=10500
        > (II) Loading /usr/X11R6/lib/modules/libddc.a
        > (II) Module ddc: vendor="The XFree86 Project"
        > compiled for 4.0.1c, module version = 1.0.0
        > (II)
        > Loading /usr/X11R6/lib/modules/libvbe.a
        > (II) Module vbe: vendor="The XFree86 Project"
        > compiled for 4.0.1c, module version = 1.0.0
        > (II) Loading /usr/X11R6/lib/modules/linux/libint10.a
        > (II) Module
        > int10: vendor="The XFree86 Project"
        > compiled for 4.0.1c, module version = 1.0.0
        > (II) r128(0): initializing int10
        > (II) r128(0): Primary V_BIOS segment is: 0xc000
        > (II) r128(0): VESA BIOS detected
        > (II)
        > r128(0): initializing int10
        > (II) r128(0): Primary V_BIOS segment is: 0xc000
        > (II) r128(0): VESA BIOS detected
        > (II) r128(0): VESA VBE DDC supported
        > (==) r128(0): Using gamma correction (1.0, 1.0,
        > 1.0)
        > (II) r128(0): Monitor0: Using hsync range of 30.00-60.00 kHz
        > (II) r128(0): Monitor0: Using vrefresh range of 60.00-90.00 Hz
        > (II) r128(0): Clock range: 12.50 to 250.00 MHz
        > (WW) r128(0): Default
        > mode "640x350" deleted (hsync out of range)
        > (WW) r128(0): Default mode "640x400" deleted (hsync out of range)
        > (WW) r128(0): Default mode "720x400" deleted (no mode of this name)
        > (WW) r128(0): Default
        > mode "640x480" deleted (hsync out of range)
        > (WW) r128(0): Default mode "640x480" deleted (hsync out of range)
        > (WW) r128(0): Default mode "640x480" deleted (hsync out of range)
        > (WW) r128(0): Default
        > mode "640x480" deleted (vrefresh out of range)
        > (WW) r128(0): Default mode "800x600" deleted (hsync out of range)
        > (WW) r128(0): Default mode "800x600" deleted (hsync out of range)
        > (WW) r128(0): Default
        > mode "800x600" deleted (vrefresh out of range)
        > (WW) r128(0): Default mode "800x600" deleted (vrefresh out of range)
        > (WW) r128(0): Default mode "1024x768" deleted (bad mode
        > clock/interlace/doublescan)
        > (WW) r128(0): Default mode "1024x768" deleted (vrefresh out of
        range)
        > (WW) r128(0): Default mode "1024x768" deleted (vrefresh out of
        range)
        > (WW) r128(0): Default mode
        > "1152x864" deleted (no mode of this name)
        > (WW) r128(0): Default mode "1280x960" deleted (vrefresh out of
        range)
        > (WW) r128(0): Default mode "1280x960" deleted (hsync out of range)
        > (WW) r128(0): Default
        > mode "1280x1024" deleted (vrefresh out of range)
        > (WW) r128(0): Default mode "1280x1024" deleted (hsync out of range)
        > (WW) r128(0): Default mode "1280x1024" deleted (hsync out of range)
        > (WW) r128(0):
        > Default mode "1600x1200" deleted (hsync out of range)
        > (WW) r128(0): Default mode "1600x1200" deleted (hsync out of range)
        > (WW) r128(0): Default mode "1600x1200" deleted (hsync out of range)
        > (WW)
        > r128(0): Default mode "1600x1200" deleted (hsync out of range)
        > (WW) r128(0): Default mode "1600x1200" deleted (hsync out of range)
        > (WW) r128(0): Default mode "1792x1344" deleted (no mode of this
        > name)
        > (WW) r128(0): Default mode "1792x1344" deleted (bad mode
        clock/interlace/doublescan)
        > (WW) r128(0): Default mode "1856x1392" deleted (no mode of this
        name)
        > (WW) r128(0): Default mode "1856x1392"
        > deleted (bad mode clock/interlace/doublescan)
        > (WW) r128(0): Default mode "1920x1440" deleted (no mode of this
        name)
        > (WW) r128(0): Default mode "1920x1440" deleted (bad mode
        > clock/interlace/doublescan)
        > (--) r128(0): Virtual size is 1024x768 (pitch 1024)
        > (**) r128(0): Default mode "1024x768": 160.0 MHz, 59.7 kHz, 72.9 Hz
        > (**) r128(0): Default mode "800x600": 160.0 MHz,
        > 41.4 kHz, 63.7 Hz
        > (==) r128(0): DPI set to (75, 75)
        > (II) Loading /usr/X11R6/lib/modules/libfb.a
        > (II) Module fb: vendor="The XFree86 Project"
        > compiled for 4.0.1c, module version = 1.0.0
        > (II) Loading
        > /usr/X11R6/lib/modules/libramdac.a
        > (II) Module ramdac: vendor="The XFree86 Project"
        > compiled for 4.0.1c, module version = 0.1.0
        > (II) Loading /usr/X11R6/lib/modules/libxaa.a
        > (II) Module xaa:
        > vendor="The XFree86 Project"
        > compiled for 4.0.1c, module version = 1.0.0
        > (==) r128(0): Write-combining range (0xf8000000,0x1000000)
        > (WW) r128(0): Static buffer allocation failed -- need at least 4608
        > kB video memory
        > (II) r128(0): Memory manager initialized to (0,0) (1024,8191)
        > (II) r128(0): Reserved area from (0,768) to (1024,770)
        > (II) r128(0): Largest offscreen area available: 1024 x 7421
        > (II)
        > r128(0): Using XFree86 Acceleration Architecture (XAA)
        > Screen to screen bit blits
        > Solid filled rectangles
        > 8x8 mono pattern filled rectangles
        > Indirect CPU to Screen color expansion
        > Solid
        > Lines
        > Dashed Lines
        > Offscreen Pixmaps
        > Setting up tile and stipple cache:
        > 32 128x128 slots
        > 32 256x256 slots
        > 16 512x512 slots
        > (II) r128(0): Acceleration enabled
        > (==) r128(0): Backing store
        > disabled
        > (==) r128(0): Silken mouse enabled
        > (II) r128(0): Using hardware cursor (scanline 1540)
        > (II) r128(0): Largest offscreen area available: 1024 x 7419
        > (II) r128(0): Direct rendering disabled
        > (**)
        > Mouse0: Protocol: "IMPS/2"
        > (**) Mouse0: Core Pointer
        > (==) Mouse0: Buttons: 3
        > (**) Mouse0: ZAxisMapping: buttons 4 and 5
        > (II) Keyboard "Keyboard0" handled by legacy driver
        > (II) XINPUT: Adding extended
        > input device "Mouse0" (type: MOUSE)
        > X connection to :0.0 broken (explicit kill or server shutdown).
        > xinit: connection to X server lost.
        >
        > waiting for X server to shut down
        >
        >
        >
        >
        > XFree86 Version 4.0.1c / X Window System
        > (protocol Version 11, revision 0, vendor release 6400)
        > Release Date: 28 August 2000
        > If the server is older than 6-12 months, or if your card is newer
        > than
        > the above date, look for a newer version before reporting
        > problems. (see http://www.XFree86.Org/FAQ)
        > Operating System: Linux 2.2.16-22 i686 [ELF]
        > Module Loader present
        > (==) Log file:
        > "/var/log/XFree86.0.log", Time: Thu Nov 2 13:47:00 2000
        > (==) Using config file: "/etc/X11/XF86Config-4"
        > Markers: (--) probed, (**) from config file, (==) default setting,
        > (++) from command
        > line, (!!) notice, (II) informational,
        > (WW) warning, (EE) error, (??) unknown.
        > (==) ServerLayout "Anaconda Configured"
        > (**) |-->Screen "Screen0" (0)
        > (**) | |-->Monitor "Monitor0"
        > (**) |
        > |-->Device "ATI Rage 128 Mobility"
        > (**) |-->Input Device "Mouse0"
        > (**) |-->Input Device "Keyboard0"
        > (**) XKB: rules: "xfree86"
        > (**) XKB: model: "pc104"
        > (**) XKB: layout: "us"
        > (WW) Option "XkbVariant"
        > requires an string value
        > (WW) Option "XkbOptions" requires an string value
        > (WW) The directory "/usr/X11R6/lib/X11/fonts/TrueType" does not
        exist.
        > Entry deleted from font path.
        > (**) FontPath set to
        > "unix/:7100"
        > (**) RgbPath set to "/usr/X11R6/lib/X11/rgb"
        > (==) ModulePath set to "/usr/X11R6/lib/modules"
        > (--) using VT number 7
        >
        > (II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a
        > (II) Module
        > bitmap: vendor="The XFree86 Project"
        > compiled for 4.0.1c, module version = 1.0.0
        > (II) Loading /usr/X11R6/lib/modules/libpcidata.a
        > (II) Module pcidata: vendor="The XFree86 Project"
        > compiled for
        > 4.0.1c, module version = 0.1.0
        > (II) Loading /usr/X11R6/lib/modules/libscanpci.a
        > (II) Module scanpci: vendor="The XFree86 Project"
        > compiled for 4.0.1c, module version = 0.1.0
        > (II) Unloading
        > /usr/X11R6/lib/modules/libscanpci.a
        > (--) PCI:*(1:0:0) ATI Rage 128 Mobility LF rev 2, Mem @
        0xf8000000/26, 0xf4000000/14, I/O @ 0x2000/8
        > (II) Loading /usr/X11R6/lib/modules/extensions/libGLcore.a
        > (II)
        > Module GLcore: vendor="The XFree86 Project"
        > compiled for 4.0.1c, module version = 1.0.0
        > (II) Loading /usr/X11R6/lib/modules/extensions/libdbe.a
        > (II) Module dbe: vendor="The XFree86 Project"
        > compiled
        > for 4.0.1c, module version = 1.0.0
        > (II) Loading /usr/X11R6/lib/modules/extensions/libdri.a
        > (II) Module dri: vendor="The XFree86 Project"
        > compiled for 4.0.1c, module version = 1.0.0
        > (II) Loading
        > /usr/X11R6/lib/modules/linux/libdrm.a
        > (II) Module drm: vendor="The XFree86 Project"
        > compiled for 4.0.1c, module version = 1.0.0
        > (II) Loading /usr/X11R6/lib/modules/extensions/libextmod.a
        > (II) Module
        > extmod: vendor="The XFree86 Project"
        > compiled for 4.0.1c, module version = 1.0.0
        > (II) Loading /usr/X11R6/lib/modules/linux/libfbdevhw.a
        > (II) Module fbdevhw: vendor="The XFree86 Project"
        > compiled for
        > 4.0.1c, module version = 0.0.1
        > (II) Loading /usr/X11R6/lib/modules/extensions/libpex5.a
        > (II) Module pex5: vendor="The XFree86 Project"
        > compiled for 4.0.1c, module version = 1.0.0
        > (II) Loading
        > /usr/X11R6/lib/modules/extensions/libglx.a
        > (II) Module glx: vendor="The XFree86 Project"
        > compiled for 4.0.1c, module version = 1.0.0
        > (II) Loading /usr/X11R6/lib/modules/extensions/librecord.a
        > (II)
        > Module record: vendor="The XFree86 Project"
        > compiled for 4.0.1c, module version = 1.13.0
        > (II) Loading /usr/X11R6/lib/modules/extensions/libxie.a
        > (II) Module xie: vendor="The XFree86
        > Project"
        > compiled for 4.0.1c, module version = 1.0.0
        > (II) Loading /usr/X11R6/lib/modules/drivers/r128_drv.o
        > (II) Module r128: vendor="The XFree86 Project"
        > compiled for 4.0.1c, module version =
        > 3.1.1
        > (II) Loading /usr/X11R6/lib/modules/input/mouse_drv.o
        > (II) Module mouse: vendor="The XFree86 Project"
        > compiled for 4.0.1c, module version = 1.0.0
        > (II) r128: Driver for ATI Rage 128 chipset: ATI
        > Rage 128 RE (PCI),
        > ATI Rage 128 RF (AGP), ATI Rage 128 RK (PCI), ATI Rage 128 RL
        (AGP),
        > ATI Rage 128 Pro PF (AGP), ATI Rage 128 Mobility LE (PCI),
        > ATI Rage 128 Mobility LF (AGP), ATI Rage 128
        > Mobility MF (AGP),
        > ATI Rage 128 Mobility ML (AGP)
        > (--) Assigning device section with no busID to primary device
        > (--) Chipset ATI Rage 128 Mobility LF (AGP) found
        > (II) Loading
        > /usr/X11R6/lib/modules/libvgahw.a
        > (II) Module vgahw: vendor="The XFree86 Project"
        > compiled for 4.0.1c, module version = 0.1.0
        > (II) r128(0): PCI bus 1 card 0 func 0
        > (**) r128(0): Depth 16, (--)
        > framebuffer bpp 16
        > (II) r128(0): Pixel depth = 16 bits stored in 2 bytes (16 bpp
        pixmaps)
        > (==) r128(0): Default visual is TrueColor
        > (==) r128(0): RGB weight 565
        > (II) r128(0): Using 6 bits per RGB (8
        > bit DAC)
        > (--) r128(0): Chipset: "ATI Rage 128 Mobility LF (AGP)" (ChipID =
        0x4c46)
        > (--) r128(0): Linear framebuffer at 0xf8000000
        > (--) r128(0): MMIO registers at 0xf4000000
        > (--) r128(0): VideoRAM:
        > 16384 kByte (128-bit SDR SGRAM 1:1)
        > (II) r128(0): Using flat panel for display
        > (WW) r128(0): Video BIOS not detected in PCI space!
        > (WW) r128(0): Attempting to read Video BIOS from legacy ISA
        > space!
        > (II) r128(0): Panel size: 1600x1200
        > (II) r128(0): Panel ID: Toshiba LTM15C162
        > (II) r128(0): Panel Type: Color, Single, TFT
        > (II) r128(0): Panel Interface: LVDS
        > (II) r128(0): PLL
        > parameters: rf=2700 rd=60 min=12500 max=25000; xclk=10500
        > (II) Loading /usr/X11R6/lib/modules/libddc.a
        > (II) Module ddc: vendor="The XFree86 Project"
        > compiled for 4.0.1c, module version = 1.0.0
        > (II)
        > Loading /usr/X11R6/lib/modules/libvbe.a
        > (II) Module vbe: vendor="The XFree86 Project"
        > compiled for 4.0.1c, module version = 1.0.0
        > (II) Loading /usr/X11R6/lib/modules/linux/libint10.a
        > (II) Module
        > int10: vendor="The XFree86 Project"
        > compiled for 4.0.1c, module version = 1.0.0
        > (II) r128(0): initializing int10
        > (II) r128(0): Primary V_BIOS segment is: 0xc000
        > (II) r128(0): VESA BIOS detected
        > (II)
        > r128(0): initializing int10
        > (II) r128(0): Primary V_BIOS segment is: 0xc000
        > (II) r128(0): VESA BIOS detected
        > (II) r128(0): VESA VBE DDC supported
        > (==) r128(0): Using gamma correction (1.0, 1.0,
        > 1.0)
        > (II) r128(0): Monitor0: Using hsync range of 30.00-60.00 kHz
        > (II) r128(0): Monitor0: Using vrefresh range of 60.00-90.00 Hz
        > (II) r128(0): Clock range: 12.50 to 250.00 MHz
        > (WW) r128(0): Default
        > mode "640x350" deleted (hsync out of range)
        > (WW) r128(0): Default mode "640x400" deleted (hsync out of range)
        > (WW) r128(0): Default mode "720x400" deleted (no mode of this name)
        > (WW) r128(0): Default
        > mode "640x480" deleted (hsync out of range)
        > (WW) r128(0): Default mode "640x480" deleted (hsync out of range)
        > (WW) r128(0): Default mode "640x480" deleted (hsync out of range)
        > (WW) r128(0): Default
        > mode "640x480" deleted (vrefresh out of range)
        > (WW) r128(0): Default mode "800x600" deleted (hsync out of range)
        > (WW) r128(0): Default mode "800x600" deleted (hsync out of range)
        > (WW) r128(0): Default
        > mode "800x600" deleted (vrefresh out of range)
        > (WW) r128(0): Default mode "800x600" deleted (vrefresh out of range)
        > (WW) r128(0): Default mode "1024x768" deleted (bad mode
        > clock/interlace/doublescan)
        > (WW) r128(0): Default mode "1024x768" deleted (vrefresh out of
        range)
        > (WW) r128(0): Default mode "1024x768" deleted (vrefresh out of
        range)
        > (WW) r128(0): Default mode
        > "1152x864" deleted (no mode of this name)
        > (WW) r128(0): Default mode "1280x960" deleted (vrefresh out of
        range)
        > (WW) r128(0): Default mode "1280x960" deleted (hsync out of range)
        > (WW) r128(0): Default
        > mode "1280x1024" deleted (vrefresh out of range)
        > (WW) r128(0): Default mode "1280x1024" deleted (hsync out of range)
        > (WW) r128(0): Default mode "1280x1024" deleted (hsync out of range)
        > (WW) r128(0):
        > Default mode "1600x1200" deleted (hsync out of range)
        > (WW) r128(0): Default mode "1600x1200" deleted (hsync out of range)
        > (WW) r128(0): Default mode "1600x1200" deleted (hsync out of range)
        > (WW)
        > r128(0): Default mode "1600x1200" deleted (hsync out of range)
        > (WW) r128(0): Default mode "1600x1200" deleted (hsync out of range)
        > (WW) r128(0): Default mode "1792x1344" deleted (no mode of this
        > name)
        > (WW) r128(0): Default mode "1792x1344" deleted (bad mode
        clock/interlace/doublescan)
        > (WW) r128(0): Default mode "1856x1392" deleted (no mode of this
        name)
        > (WW) r128(0): Default mode "1856x1392"
        > deleted (bad mode clock/interlace/doublescan)
        > (WW) r128(0): Default mode "1920x1440" deleted (no mode of this
        name)
        > (WW) r128(0): Default mode "1920x1440" deleted (bad mode
        > clock/interlace/doublescan)
        > (--) r128(0): Virtual size is 1024x768 (pitch 1024)
        > (**) r128(0): Default mode "1024x768": 160.0 MHz, 59.7 kHz, 72.9 Hz
        > (**) r128(0): Default mode "800x600": 160.0 MHz,
        > 41.4 kHz, 63.7 Hz
        > (==) r128(0): DPI set to (75, 75)
        > (II) Loading /usr/X11R6/lib/modules/libfb.a
        > (II) Module fb: vendor="The XFree86 Project"
        > compiled for 4.0.1c, module version = 1.0.0
        > (II) Loading
        > /usr/X11R6/lib/modules/libramdac.a
        > (II) Module ramdac: vendor="The XFree86 Project"
        > compiled for 4.0.1c, module version = 0.1.0
        > (II) Loading /usr/X11R6/lib/modules/libxaa.a
        > (II) Module xaa:
        > vendor="The XFree86 Project"
        > compiled for 4.0.1c, module version = 1.0.0
        > (==) r128(0): Write-combining range (0xf8000000,0x1000000)
        > (WW) r128(0): Static buffer allocation failed -- need at least 4608
        > kB video memory
        > (II) r128(0): Memory manager initialized to (0,0) (1024,8191)
        > (II) r128(0): Reserved area from (0,768) to (1024,770)
        > (II) r128(0): Largest offscreen area available: 1024 x 7421
        > (II)
        > r128(0): Using XFree86 Acceleration Architecture (XAA)
        > Screen to screen bit blits
        > Solid filled rectangles
        > 8x8 mono pattern filled rectangles
        > Indirect CPU to Screen color expansion
        > Solid
        > Lines
        > Dashed Lines
        > Offscreen Pixmaps
        > Setting up tile and stipple cache:
        > 32 128x128 slots
        > 32 256x256 slots
        > 16 512x512 slots
        > (II) r128(0): Acceleration enabled
        > (==) r128(0): Backing store
        > disabled
        > (==) r128(0): Silken mouse enabled
        > (II) r128(0): Using hardware cursor (scanline 1540)
        > (II) r128(0): Largest offscreen area available: 1024 x 7419
        > (II) r128(0): Direct rendering disabled
        > (**)
        > Mouse0: Protocol: "IMPS/2"
        > (**) Mouse0: Core Pointer
        > (==) Mouse0: Buttons: 3
        > (**) Mouse0: ZAxisMapping: buttons 4 and 5
        > (II) Keyboard "Keyboard0" handled by legacy driver
        > (II) XINPUT: Adding extended
        > input device "Mouse0" (type: MOUSE)
        >
        > waiting for X server to shut down X connection to :0.0 broken
        (explicit kill or server shutdown).
      Your message has been successfully submitted and would be delivered to recipients shortly.