Loading ...
Sorry, an error occurred while loading the content.
5700
Any interest in a Lathemaster 9x20 I bought this thing several years back maybe 2005/2006? Don't remember when it was that Lathemaster dropped the 9x20 in favor of the 9x30. I've used it only
dewmincin
Apr 17
#5700
 
5699
Spindle upgrade question for Lathesmith? Lathesmith, Saw your pictures about the new spindle you build for your 8x12 lathe. Wanted to know if it was worth it and how figured which gears you needed to
bob_guenthner
Apr 16
#5699
 
5698
Re: Pulley is falling off. cool i shimmed it with some foil, and it looks like its going to work. the pulley i just move back and forth in place. which is much better than falling off.
teslapiper01
Mar 11
#5698
 
Fetching Sponsored Content...
5697
Re: Pulley is falling off. Exactly, the tension adjusting for the Cog belt bolt probably backed off. Thing is why, forgot to oil it maybe? Or just not tight enough. I had forgotten
Dan Field
Mar 10
#5697
 
5696
Re: Pulley is falling off. Not the belt tensioner. The one I'm referring to is the step pulley mounted on the thick back panel. It has 3 v-belt grooves and is above the motor. It is also
kenjroy
Mar 10
#5696
 
5695
Re: Lathemaster motor upgrade Thanks much Eddie. On Monday, March 10, 2014 4:05 PM, Eddie Martin wrote:   ... Thanks much Eddie. On Monday, March 10, 2014 4:05 PM,
Kenneth Roy
Mar 10
#5695
 
5694
Re: Lathemaster motor upgrade I put this set-up on a H/F 8 X 12-- I 1/4 HP D/C treadmill motor with the same controller that was used on the treadmill added a Double pole double throw
Eddie Martin
Mar 10
#5694
 
5693
teslapiper01
Mar 10
#5693
 
5692
Re: Pulley is falling off. That isn't the one i was referring to, but that may be the problem. the toothed belt stays aligned for the most part when i don't have the v belt connected to
teslapiper01
Mar 10
#5692
 
5691
Re: Pulley is falling off. Strange my message disappeared. I am actually referring to the pulley directly to the left of the idler pulley. But it seems that the problem you describe
teslapiper01
Mar 10
#5691
 
5690
Re: Lathemaster motor upgrade Hey Eddie; What size lathe do you have, and what size treadmill motor did you use? On Sunday, March 9, 2014 5:49 PM, Stephen Castello
Kenneth Roy
Mar 10
#5690
 
5689
Re: Pulley is falling off. Are you referring to the "idler" pulley above the motor? Mine was not aligned properly, and caused the cog belt to run half way off the pulley. Had to shim the
kenjroy
Mar 10
#5689
 
5688
Re: Lathemaster motor upgrade Thanks for the info Stephen.
kenjroy
Mar 10
#5688
 
5687
Pulley is falling off. Hey guys, i just got my lathemaster 9x30 the other day. I had to disassemble it to get it in my house and downstairs. I took off the motor in this process
teslapiper01
Mar 10
#5687
 
5686
Re: Lathemaster motor upgrade I have a 9x30 and would like to hear others input as well. I'd looking to do the 3 phase option with a vfd. I also have a Sherline and being able to change
prophub
Mar 9
#5686
 
Fetching Sponsored Content...
5685
Re: Lathemaster motor upgrade To each his own-- I managed to pick up a treadmill motor and controller for less than $50--I wouldn't go back matter of fact I gave my A/C motor away--Happy
Eddie Martin
Mar 9
#5685
 
5684
Re: Lathemaster motor upgrade On 09 Mar 2014 14:39:35 -0700, had a flock of ... The VFD can reverse the motor. The info will be in the manual for it. -- Stephen "Some
Stephen Castello
Mar 9
#5684
 
5683
Lathemaster Sorry guys, I should have mentioned the dealer I saw the 3 phase motor on. It's dealerselectric.com.
kenjroy
Mar 9
#5683
 
5682
Lathemaster motor upgrade Hi everyone; I'm considering converting my Lathemaster 9x30 lathe to variable speed. I might be opening a can of worms here. Does anyone have opinions on this?
kenjroy
Mar 9
#5682
 
5681
Re: OLD SOUTH BEND PRECISION LATHE Run it on eBay some one will be more than happy to purchase it and pay Fed-X to come crate it up,just for the bed alone ________________________________ From:
Eddie Martin
Mar 5
#5681
 
5680
Re: OLD SOUTH BEND PRECISION LATHE It is in El Cajon, CA. It was in an open air carport, not in good shape. ... From: lathemaster@yahoogroups.com [mailto:lathemaster@yahoogroups.com]On Behalf
Albert Taschner
Mar 5
#5680
 
5679
Re: OLD SOUTH BEND PRECISION LATHE It is in El Cajon, CA. It was in an open air carport, not in good shape.
altaschner
Mar 5
#5679
 
5678
Re: OLD SOUTH BEND PRECISION LATHE It is located in El Cajon, CA
altaschner
Mar 5
#5678
 
5677
Re: OLD SOUTH BEND PRECISION LATHE You have a Sb 13" lathe. So you have pics? Can you describe what makes the condition bad? Rust? Wear? Broke and/or missing parts . This lathe still has
Joe Smith
Mar 4
#5677
 
5676
Re: OLD SOUTH BEND PRECISION LATHE Where is this lathe? jim cain In a message dated 3/3/2014 11:02:45 P.M. Eastern Standard Time, jst4rlg@... writes: Hi Albert, If the bearings are still
beaner3598
Mar 4
#5676
 
5675
Re: OLD SOUTH BEND PRECISION LATHE Hi Albert, If the bearings are still good and the ways aren't nicked up, you shouldn't have any trouble finding a buyer. It's probably a better lathe that
Ron Gerard
Mar 3
#5675
 
5674
OLD SOUTH BEND PRECISION LATHE Can anybody tell me what I can do with an OLD SOUTH BEND PRECISION LATHE, that has not been used in 25 yrs and is in BAD shape? Can I sell it? or is it worth
Albert Taschner
Mar 3
#5674
 
Fetching Sponsored Content...
5673
Re: Jacobs 6 taper Thanks soooo much John. On Sunday, February 23, 2014 3:09 PM, john baird wrote:   ... Thanks soooo much John. On Sunday,
Kenneth Roy
Feb 24
#5673
 
5672
Re: Jacobs 6 taper Hi,  1.4868 deg Regards  jb ... Hi, 1.4868 deg Regards jb On Sunday, 23 February 2014, 16:05, "kenjroy@..." wrote: Hey guys; Time
john baird
Feb 23
#5672
 
5671
Jacobs 6 taper Hey guys; Time to pick your brains. I want to cut a JT6 taper on the end of a short shaft. Does anyone know what degree setting my compound rest should be set
kenjroy
Feb 23
#5671
 
View First Topic Go to View Last Topic
Loading 1 - 30 of total 5,700 messages