5th line again
- Hi guys thanks very much to everyone who has helped with this.
can i just ask though should my 5th line connect to the leading edge on
a short piece of line or as I have at the moment a 6 ft length of line
with several knots it seems too long as it is but it does fly
- --- In firstname.lastname@example.org, "rockhopper25" <rockhopper25@...> wrote:
>.........the reason for the long line is when a 5M C-kite is measured from top-center to a
> Hi guys thanks very much to everyone who has helped with this.
> can i just ask though should my 5th line connect to the leading edge on
> a short piece of line or as I have at the moment a 6 ft length of line
> with several knots it seems too long as it is but it does fly
point equal to the front/back lines ...it measures: X ...and the 5th line off the bar connects
to it. ...No problem so far.
Move that same bar to a 16M ...and oooops!? If you don't have a lot longer line from the
center of the 16 ..there's no connection. When I made my own, I would simply have a
specific bar/lineset for a given kite - then I could make the 5th line from the bar as long
as I wanted/needed. I liked to cleat the 5th on the bar so I could adjust it. ..and there was
a way you could run it from the kite - to the chicken loop - back to a cleat on the bar to
make it dynamic.
I flew my 06 Rhino 12 yesterday and the setting for the 5th was just so - no slack/no pull.
All my homemade versions flew with some slack. I suspect North found that the 5th also
helps retain the shape. If you ever get a chance to get one cheap - grab it! It is one
Jumping Fool's kite.
If your line from the kite is really flying slack - like bowing waaay back from the front
lines, then it is probably too long or your lineset is not matched to that kite. Tweak it -
see what happens....