Loading ...
Sorry, an error occurred while loading the content.

Kiteboat launching

Expand Messages
  • hungvu2000@rogers.com
    Here is what I think may work for kite launching from the boat: 1- Prepare the kite, bar, lines and pre-inflate the struts on land. Connect the lines to the
    Message 1 of 2 , Jun 6, 2006
    • 0 Attachment
      Here is what I think may work for kite launching from the boat:

      1- Prepare the kite, bar, lines and pre-inflate the struts on land.
      Connect the lines to the kite and roll the lines into a Turbo Launcher.
      Roll the kites in with the strut inflated.
      2- Get on the boat with the kite rolled up and get the boat out in
      open water (using paddle or engine)
      3- Attached the kite to the downwind side of the boat via the pump
      leash and inflat the LE.
      4- Attached the chicken loop to the boat and release the kite and
      let it drift downwind (similar to a typical drift launching sequence
      using the Turbo Launcher).
      5- Launch the kite from the water

      It works best for a flat kite as it is easier to relaunch and also one
      can depower it fully once it relaunched.

      Let me know what you think.

      We will try it the next time we're out.

      Hung.


      [Non-text portions of this message have been removed]
    • Joe Dominguez
      I find it easier/safer for some to hold the kite on the boat and for the kiter to jump in the water and unroll the bar as they are drifting away, that way the
      Message 2 of 2 , Jun 6, 2006
      • 0 Attachment
        I find it easier/safer for some to hold the kite on the boat and for the
        kiter to jump in the water and unroll the bar as they are drifting away,
        that way the kite is always under control.



        ------------------------------------
        http://www.NeWind.org
        --



        From: hungvu2000@...
        Reply-To: kitesurf@yahoogroups.com
        Date: Tue, 06 Jun 2006 07:53:13 -0400
        To: kitesurf@yahoogroups.com
        Subject: [ksurf] Kiteboat launching





        Here is what I think may work for kite launching from the boat:

        1- Prepare the kite, bar, lines and pre-inflate the struts on land.
        Connect the lines to the kite and roll the lines into a Turbo Launcher.
        Roll the kites in with the strut inflated.
        2- Get on the boat with the kite rolled up and get the boat out in
        open water (using paddle or engine)
        3- Attached the kite to the downwind side of the boat via the pump
        leash and inflat the LE.
        4- Attached the chicken loop to the boat and release the kite and
        let it drift downwind (similar to a typical drift launching sequence
        using the Turbo Launcher).
        5- Launch the kite from the water

        It works best for a flat kite as it is easier to relaunch and also one
        can depower it fully once it relaunched.

        Let me know what you think.

        We will try it the next time we're out.

        Hung.

        [Non-text portions of this message have been removed]






        [Non-text portions of this message have been removed]
      Your message has been successfully submitted and would be delivered to recipients shortly.