Re: [kantronics] Kenwood TM-231A to Kantronics KPG 3+ wiring
- manuals are getting hard to find.
mods.dk has a KPC-3 Getting Started manual with a diagram. The DB-9 is the same as the KPC-3+. I got this from piecing together informatio from a couple of other sites.
1 1 (mic)
3 2 (ptt)
6 speaker ground
9 9 (ground)
--- On Thu, 11/19/09, ricktbear <rvollb@...> wrote:
From: ricktbear <rvollb@...>
Subject: [kantronics] Kenwood TM-231A to Kantronics KPG 3+ wiring
Date: Thursday, November 19, 2009, 7:14 AM
Anybody have or know where I can get the schmatic to connect the TM-231A to a Kantronics KPG 3+.
Thanks in advance
[Non-text portions of this message have been removed]
also the Pinout is as follows:
Pin# 1 = Mic Audio
Pin# 2 = PTT
Pin# 3 = Down
Pin# 4 = Up
Pin# 5 = 8vdc
Pin# 6 = Receive Audio
Pin# 7 = Mic Grnd
Pin# 8 = Grnd
Let me know how it goes.
Tnx Steve KB6HOH
--- In email@example.com, "ricktbear" <rvollb@...> wrote:
> Anybody have or know where I can get the schmatic to connect the TM-231A to a Kantronics KPG 3+.
> Thanks in advance
> Rick KA7CFM