Thanks for the input. My question was not if 1200 bd was legal on HF. The
question was if the HF port on the KAM could be made to do 1200 bd as the
current dual port TNC from KAM does. No where did I indicate I intended to
operate on HF. I am sorry if my message lead you to think this.
FYI, my intent it to use the KAM on 2meter and 6meter, both bands are fully
within the regs as usable for 1200bd operation.
Not trying to be a donkey, it is just frustrating to get answers that do not
have anything to do with your question.
73 de Kevin
Behalf Of james@...
Sent: Monday, May 26, 2008 9:38 PM
Subject: Re: [kantronics] Advice on older Kam all mode
1200 baud is illegal in the US it exceeds the 300 symbol rate.
It may be usable above 29mhz, however where FM is allowed.
Quoting Kevin King <kc6ovd@...
> Hello to the group,
> I have a few older KAM all modes.They do not have the enhancement
> I was wondering if a version of firmware ever supported 1200 bd hf as
> it is the hf port will only do 300bd.
> Any sugestions on mods, updates, firmware versions, etc would be
> Thanks \\