Loading ...
Sorry, an error occurred while loading the content.
 

Re: KPC3+ with 8.3 code and Peet Bros Ultimeter

Expand Messages
  • ml41782
    bad cable was the cuplprit. It was an intermitten problem that was out more than working.
    Message 1 of 2 , Dec 9, 2010
      bad cable was the cuplprit. It was an intermitten problem that was out more than working.

      --- In kantronics@yahoogroups.com, "ml41782" <ml41782@...> wrote:
      >
      > Good morning,
      > I have a problem with integration.
      > I have a Peet Bros Ultimeter 800 weather station. I should be able to connect it to XCD on the 9 pin port and grnd to pin 6.
      >
      > gpsport 2400 normal nocheck.
      > followed by gpshead 1 and use either "!!" or "$ULTW" dependning on if I use data logging or Packet mode.
      > LTP 1 APN383 VIA WIDE2-2
      >
      > I have verified the output of the weather station with a serial sniffer 2400 8N1. I have verified the data stream up to the db9 on the back of the TNC. My cable is good.
      >
      > All monitoring is on. I dont see any thing from the weather station pass through the TNC
      >
      > Any Thoughts ?
      >
      >
      >
      > Mike K4MQF
      >
    Your message has been successfully submitted and would be delivered to recipients shortly.