Re: [jomox] Re: Plugged in Mbase 11 120 V adaptor into a 240V outlet
- View SourceSeems noone answered until now.
I am quite sure that only the original wallwart is broken. The Mbase
should be fine. I don't own an amabase, but according the pictures on
the jomox website it should be a standard wallwart 9V DC with + at
center pin and -. at the outer contact.
A 300mA DC wallwart should be fine.
Am 19.09.2011 19:30, schrieb analogvirtual:
> --- In firstname.lastname@example.org, "analogvirtual"<soniktec@...> wrote:
>> I forgot to plug it in through the step down transformer.
>> I did not turn on the unit, but I got a burning plastic smell for a few seconds.
>> It was coming from the adaptor and not the mbase unit.
>> Then I quickly took it out and tried again through the step down...
>> The unit LCD display came on for a fraction of a second and went off..
>> Now the unit is not turning on at all.
>> There is NO burning smell from the unit itself .Only from the adaptor.
>> Usually, in such cases, is the unit damaged or only the adaptor ?
>> I am going to try to get a new adaptor with the same specs here, soon.
>> I hope the main unit is still working properly.
>> If the unit is damaged, do I send it back to Jomox for repairs ?
>> Thanks Guys
> I forgot to mention..THe Pins on the adaptor were hot.
> Yahoo! Groups Links