276RE: [j4x-owners-group] engine control at Edson pedestal
- Sep 7, 2010
Where is the friction screw… on the handle or on the cables or on the transmission?
Thanks, by the way I saw you in the Queen’s Cup this year. Good race. I was racing on another boat in a different class.
From: email@example.com [mailto:firstname.lastname@example.org] On Behalf Of William Stellin
Sent: Tuesday, September 07, 2010 7:38 AM
Subject: Re: [j4x-owners-group] engine control at Edson pedestal
Try loosening the friction screw.
Sent from my iPod
On Sep 7, 2010, at 2:57 AM, "Conrad Deeter" <cdsail@...> wrote:
I have a 2000 J42 and the single handle control on the pedestal is very stiff in moving through the motions of forward, neutral and reverse. As a result relatively quick engagement of either forward of reverse causes a jolt because the engine is starting to rev before the transmission engages. If the handle is moved slowly the transmission engages and no problem.
It seems I have two problems:
- The mechanism is very stiff – I took off the compass and could view the mechanism and it seemed to move properly but very stiff
- The engagement of the transmission either needs adjustment on the cable or it is the mechanism that is the problem
Anyone have a similar problem? Is so what was your fix?
Thanks for your help again
- << Previous post in topic Next post in topic >>