Loading ...
Sorry, an error occurred while loading the content.

Re: Embedded Node to RC210 Controller ECHO Effect

Expand Messages
  • garyp609
    I solved the echo problem. I didn t have both analog and digital grounds hooked up on the Repeater Controller. Once I connected the digital ground the echo
    Message 1 of 6 , Jan 14, 2009
    • 0 Attachment
      I solved the echo problem. I didn't have both analog and digital
      grounds hooked up on the Repeater Controller. Once I connected the
      digital ground the echo went away on all ports including IRLP.


      --- In irlp-embedded@yahoogroups.com, Gary Paul <gary.paul@...> wrote:
      >
      > Where is that setting? I have port 3 the IRLP node as half duplex.
      Non
      > repeating port.
      > Thanks for you help.
      > Gary K2ACY
      >
      >
      >
      > On Jan 11, 2009, at 2:16 AM, "Ted Maczulat" <tmaczulat@...> wrote:
      >
      > > In the RC210 is the port you have the node connected to
      configures
      > > as a repeater or as a remote base? It should be set as a remote
      not
      > > as a repeater.
      > >
      > > Ted
      > > ----- Original Message -----
      > > From: Gary Paul
      > > To: irlp-embedded@yahoogroups.com
      > > Sent: Saturday, January 10, 2009 7:14 PM
      > > Subject: RE: [irlp-embedded] Embedded Node to RC210 Controller
      ECHO
      > > Effect
      > >
      > > Any idea why when a node times out when connected the
      disconnected
      > > message has a reverb on it? It seems to be playing twice just
      > > milliseconds apart.
      > >
      > >
      > >
      > > From: irlp-embedded@yahoogroups.com [mailto:irlp-
      embedded@yahoogroups.com
      > > ] On Behalf Of David Cameron IRLP
      > > Sent: Saturday, January 10, 2009 2:20 PM
      > > To: irlp-embedded@yahoogroups.com
      > > Subject: Re: [irlp-embedded] Embedded Node to RC210 Controller
      ECHO
      > > Effect
      > >
      > >
      > >
      > > Have you contacted Ken Arck and asked him his opinion? It sounds
      to me
      > > like you have the port for IRLP not set right.
      > >
      > > Dave Cameron
      > >
      > > garyp609 wrote:
      > > >
      > > >
      > > > I have an embedded node hooked directly to port 3 of my Arcom
      > > > controller. Port 1 & 2 are Kenwood TKR repeaters. When I link
      the
      > > > embedded node to port 1 or 2 I get a slight echo effect. By
      > > turning off
      > > > port 3 in the Arcom controller and just leaving port 1 & 2 on
      and
      > > > linked together the audio is fine. Is there a setting in the
      > > embedded
      > > > node that I need to set because it's hook directly to a repeater
      > > > controller? I have checked aumix and the only 'R' is on LINE
      and
      > > it is
      > > > at zero. I have Volume, PCM and IGAIN controls enabled. All
      other
      > > > sliders are zeroed. Also if this helps. I get an echo effect
      on
      > > the wav
      > > > file played when a user times out on EchoLink. Any help would be
      > > > appreciated.
      > > > Thanks & 73's
      > > > Gary
      > > >
      > > >
      > >
      > >
      > >
      > > No virus found in this incoming message.
      > > Checked by AVG - http://www.avg.com
      > > Version: 8.0.176 / Virus Database: 270.10.5/1885 - Release Date:
      > > 1/9/2009 7:59 PM
      > >
      >
    Your message has been successfully submitted and would be delivered to recipients shortly.