Loading ...
Sorry, an error occurred while loading the content.
 

Re: Problem with voice_id and speaktime

Expand Messages
  • va6xg
    ... This ... through ... Thanks, Dave. I had completely forgotten that I had switched radios when my trusty Motorola gave out. And of course I switched cables
    Message 1 of 5 , Mar 10, 2008
      --- In irlp-embedded@yahoogroups.com, "David Cameron (IRLP)"
      <dcameron@...> wrote:
      >
      > In this case, you should use aux1on and aux1off to key the radio.
      This
      > is suggested in the manual, and requires that PIN 2 and PIN 3 on the
      > DB-9 be bridged. This will allow independent keying of the node
      through
      > the AUX pin, and will leave the PTT alone.
      >
      > Dave Cameron
      >
      Thanks, Dave. I had completely forgotten that I had switched radios
      when my trusty Motorola gave out. And of course I switched cables and
      the new (old) one did not have the bridge.
      Mike
      >
    Your message has been successfully submitted and would be delivered to recipients shortly.