Loading ...
Sorry, an error occurred while loading the content.

Re: [irlp-embedded]NEW BOX ARRIVED

Expand Messages
    Thanks for the clarification. Jim WH7CD ... From: David Cameron (IRLP) To: irlp-embedded@yahoogroups.com Sent: Wednesday, November 21, 2007 8:21 AM Subject:
    Message 1 of 3 , Nov 21 9:17 AM
      Thanks for the clarification.  Jim WH7CD
      ----- Original Message -----
      Sent: Wednesday, November 21, 2007 8:21 AM
      Subject: Re: [irlp-embedded]NEW BOX ARRIVED

      The pin 8 of the DB-9 feeds into the left side of the line in. Pin 9 of
      the DB-9 feeds into the left line-out.

      Do not use the 1/8" stereo jacks on the back of the unit unless you
      absolutely have to. The audio is designed to be fed to a single channel
      and out of a single channel. This is how the unit can be used as a
      controller, because you can control the audio through the unit with the
      mixers, including muting and other things. Some of this is described in
      the info document available from the files area of this yahoo group.

      Feed the squelched and de-emphasized audio into pin 8, and the transmit
      audio from pin 9 of the IRLP DB-9.

      If you sent me the echolink information when your ordered, I would have
      put it into the system. Otherwise, you have to follow the document and
      setup the files. I don't directly support the EchoIRLP portions, but I
      will help with setup, and I can login and set it up for you if you have
      the info.

      Dave Cameron

      JIM AND LYN HALL wrote:
      > Dave, node 3024 arrived today. Questions: 1. is the "Mic in" plug on the back in parallel with the mini d connector so I can use a 1/8" phono plug from the radio to the socket in the back of the cpu? I assume it is. 2. Are we set up for echolink or do we need to turn it on in software and/or move the jumper on the board? Thanks 73 Jim Hall WH7CD
      > ----- Original Message -----
      > From: David Cameron (IRLP)
      > To: irlp-embedded@ yahoogroups. com
      > Sent: Monday, November 19, 2007 11:32 AM
      > Subject:

    Your message has been successfully submitted and would be delivered to recipients shortly.