Re: REMOTE ACCESS
I discoverd port 80 and others blocked by my ISP which may have created the problem that led to me re-installing "install-ra" trying to sort the problem out and created a new one.
I got the blocked ports issue sorted out just before you looked at the matter.
Many thanks for your assistance. The remote access now works fine.
--- In firstname.lastname@example.org, "David Cameron (IRLP)" <dcameron@...> wrote:
> Well remote-admin was already installed on your system, and then what
> you did was re-install it on top, using different ports - even with the
> 2GB flash drive installed.
> So now you have a port conflict between http and ssh.
> I was able to log into your node remotely, and fix the issue.
> Your embedded node's SSH listens on port 15426, so you have to use that
> port with Putty (SSH), and WinSCP.
> Now the web port is listening on port 80, like it should, and I am
> prompted for a username and password.
> Dave Cameron
> On 3/12/2013 7:09 PM, Alan M wrote:
> > I am unable to access my embedded node from a remote location using
> > http://stn6584.ip.irlp.net/control/
> > Port forwarding of 15426 and 80 to 192.168.1.10 (node LAN address) is in place. When trying to access remotely a message comes back that the server has dropped the connection. It says wait a few minutes and try again but to no avail.
> > I have installed install-ra per http://www.irlp.net/owners/remote-admin.html but get error messages during installation to effect "- (Re)starting HTTP service ....
> > Starting httpd: (98)Address already in use: make_sock: could not bind to address [::]:15426
> > no listening sockets available, shutting down
> > Unable to open logs"
> > Putty and WinSCP work fine within the LAN but remote access from another location will not function. That is, no connection is possible from outside my router. I have also followed instructions from portforward.com re my router TP Link TD-W8960N .
> > The embedded node is fitted with the 2gb flash drive. The node works fine but remote access is not functioning.
> > Can some tests be run and I will appreciated assistance and suggestions.