Loading ...
Sorry, an error occurred while loading the content.

Re: Daylight Time Change

Expand Messages
  • Brayden Hulett
    Thanks Dave, That worked perfectly! Brayden
    Message 1 of 8 , Oct 26, 2012
    • 0 Attachment
      Thanks Dave,

      That worked perfectly!

      Brayden

      --- In irlp-embedded@yahoogroups.com, "ve7ltd" <dcameron@...> wrote:
      >
      > Okay, I have updated the zoneinfo files that are pulled down by the fix-dst script.
      >
      > So if you are having trouble with your timezones, you can try to get this new version of the fix-dst script and zone files, and it should fix any problem. The files were updated on September 17th if this year.
      >
      > Here are the commands to run fix-dst
      >
      > log in as root
      > cd /root
      > wget ftp://ftp.irlp.net/fix-dst
      > sh fix-dst
      >
      > It will download the new zones, and ask you to enter your timezone again.
      >
      > Happy updating!
      >
      > Dave Cameron
      > VE7LTD
      >
      > --- In irlp-embedded@yahoogroups.com, "Brayden Hulett" <braydenhulett@> wrote:
      > >
      > > Hi Dave,
      > >
      > > This would be node 6789 - run by Craig Meddings VK3CRG.
      > >
      > > I appreciate the help!
      > >
      > > Regards,
      > >
      > > Brayden
      > >
      > > --- In irlp-embedded@yahoogroups.com, "David Cameron (IRLP)" <dcameron@> wrote:
      > > >
      > > > Okay, well there was a script change for the set-time script as well.
      > > > But since it is a root script, it needs to be modified on the box by the
      > > > root user.
      > > >
      > > > The ntp.ubc.ca was shut down (without my knowing), so not that script
      > > > should use:
      > > >
      > > > rdate -s ntp.irlp.net
      > > >
      > > > (This at least I have control over).
      > > >
      > > > It could be that the timezone is correct, just that your time can not be
      > > > updated because the set-time script is bad :)
      > > >
      > > > What is your node number - I will log in and have a look to see if I can
      > > > figure out why this is happening.
      > > >
      > > > Dave Cameron
      > > >
      > > > On 23/10/2012 11:09 PM, Brayden Hulett wrote:
      > > > > As an update - I reapplied it (twice now) and there is no change. On reboot, the time is still an hour behind and when the script finishes (but before flash_sync runs), I see 'timeout for ntp.ubc.ca'.
      > > > >
      > > > > Running /usr/sbin/set-time has no effect either.
      > > > >
      > > > > --- In irlp-embedded@yahoogroups.com, "ve7ltd" <dcameron@> wrote:
      > > > >>
      > > > >> Try to reapply the fix:
      > > > >>
      > > > >> http://groups.yahoo.com/group/irlp-embedded/message/232
      > > > >>
      > > > >> I assume the timezone you are trying to apply is available in the list when you use the timeconfig command?
      > > > >>
      > > > >> Try the steps in the message linked above.
      > > > >>
      > > > >> Dave Cameron
      > > > >>
      > > > >> --- In irlp-embedded@yahoogroups.com, "Brayden Hulett" <braydenhulett@> wrote:
      > > > >>>
      > > > >>> Hi All,
      > > > >>>
      > > > >>> Daylight savings has come in to effect here in Melbourne, Australia and my embedded node is still running behind. I have seen mention of a script on here that says it will fix this issue, but I've also read that all new nodes have the updated zoneinfo by default? I have attempted to force an update using set-time, but it still comes back with the non-dst time.
      > > > >>>
      > > > >>> Any help is appreciated. :)
      > > > >>>
      > > > >>> Regards,
      > > > >>>
      > > > >>> Brayden
      > > > >>>
      > > > >>
      > > > >
      > > > >
      > > > >
      > > >
      > >
      >
    Your message has been successfully submitted and would be delivered to recipients shortly.