Loading ...
Sorry, an error occurred while loading the content.

Re: [irlp-embedded] Re: CW ID

Expand Messages
  • David Cameron (IRLP)
    No, this is if you are using the node as a controller. Not if it is connected to another controller. Dave
    Message 1 of 4 , Aug 26, 2012
    • 0 Attachment
      No, this is if you are using the node as a controller. Not if it is
      connected to another controller.

      Dave

      On 26/08/2012 4:23 PM, k7iou1 wrote:
      > I also see controller in this file
      > Since its on a repeater & connected through a controller should I change to yes?
      > Thanks
      >
      > David k7iou
      >
      > On Aug 26, 2012, at 2:21 PM, "ve7ltd" <dcameron@...> wrote:
      >
      >> That is default behavior for Embedded IRLP nodes. The directions on how to change the features is in the embedded node info document at:
      >>
      >> http://www.irlp.net/embedded/embedded_info.pdf
      >>
      >> The features of the node are controlled by the file:
      >>
      >> /home/irlp/features/features.env
      >>
      >> The contents of the file are below:
      >>
      >> export IS_EMBEDDED=YES
      >> export USE_ECHOIRLP=NO
      >> export USE_STAR69=NO
      >> export USE_SPEAKTIME=YES
      >> export USE_CONTROLLER=NO
      >> export USE_IRLP_WEBADMIN=YES
      >> export USE_MORSEID=YES
      >> export START_VPN_ONBOOT=NO
      >>
      >> As you can see, the line USE_MORSEID needs to be changed to NO.
      >>
      >> As with all changes to configuration files, you have to run:
      >>
      >> flash_sync
      >>
      >> to save the configuration after you are finished.
      >>
      >> Dave Cameron
      >>
      >> --- In irlp-embedded@yahoogroups.com, "k7iou" <k7iou1@...> wrote:
      >>>
      >>> I have a new embedded node that CW id's on disconnect does anyone know how to disable this?
      >>> Thanks!
      >>>
      >>
      >>
      >
    Your message has been successfully submitted and would be delivered to recipients shortly.