Re: Help needed for EchoIRLP audio problem
- Sorry its been a while since i checked this No the probelm was not my router as there is no router in line with the machine running echoirlp I traced the issue down to having to complex a password in my echo_environment and tbd.conf. I simplified this password and it started working immediately. Thank you for the help though.
--- In email@example.com, David McAnally <David.McAnally@...> wrote:
> Run troubleshoot-irlp . I suspect you forgot to forward EchoLink UDP ports
> 5198 and 5198 in your router firewall.
> David McAnally
> WD5M <http://wd5m.net/>
> On Fri, Dec 30, 2011 at 2:43 PM, Headspin4 <va7dmn@...> wrote:
> > Hi there I recently converted my working IRLP node into an EchoIRLP node
> > upon doing so I have audio both ways on the IRLP side working fine. My
> > audio on the EchoIRLP however is another story. When i boot the box up i
> > get the Echo link IRLP enabled. Users can connect to my link just fine, the
> > voice states the callsign connecting and disconnecting just fine yet there
> > is no audio in or out. I found the post about making sure the
> > echo_environment file and the TBD.conf file have the same passwords, this
> > was not my case the passwords matched fine, the compression line was
> > however commented out so i removed the comment saved the file using the
> > repeater user, saved it restarted the box just to be sure it updated
> > itself, this did nothing and I still have the same issue. any further help
> > would be greatly appreciated. have a great day.
> > Mat Turner
> > VA7DMN
> > Echo Link Node VA7RFR-R