Loading ...
Sorry, an error occurred while loading the content.

HowTo for AUMIX

Expand Messages
  • David
    I know most of you with probably think that this is a no-brainer, but I have not managed to find all the relevant information together in one place. As I am
    Message 1 of 2 , Dec 4, 2011
    • 0 Attachment
      I know most of you with probably think that this is a no-brainer, but I have not managed to find all the relevant information together in one place. As I am getting complaints from the Win system operators that audio from my node is too high, I need some guidance. Unfortunately, I don't have access to much if any test gear.

      Anyway, here goes.

      login as: root
      root@192.168.0.10's password:
      Linux 2.4.32-irlp.
      root@stn5918:/root# aumix
      aumix P+++++++++++O++++++++++++++++++++++ Vol
      ++++++++++++++++++++++O+++++++++++<Pcm
      Quit O+++++++++++++++++++++++++++++++++ Spkr
      Load R++++++++++++O+++++++++++++++++++++ Line
      Save PO+++++++++++++++++++++++++++++++++ Mic
      Keys PO+++++++++++++++++++++++++++++++++ CD
      Mute ++++++++++++O+++++++++++++++++++++ IGain
      Only P++++++++++++++++O+++++++++++++++++ Line1
      Undo +++++++++++++++++++++++++++++++++O Digital1
      P++++++++++++++++O+++++++++++++++++ PhoneIn
      P+++++++++++++++++++++++++++++++++O PhoneOut
      P+++++++++++++++++++++++++++++++++O Video
      0 Level 100

      What does each slider control in terms of Rig-to-node, node-to-rig, node-to-internet, internet-to-node? Put another way, what is the function of each slider? Does the Vol slider affect all the others?

      Looking forward to any help you can give.

      73 Dave G4CLI
      --
      Dr David J Lockwood G4CLI
      <g4cli@...>
      NodeOp:MB7IWR:IRLP-5918:EchoIRLP-389283
    • David Cameron (IRLP)
      This information is all listed in the embedded node information document, on page 14, as clearly as I can explain it.
      Message 2 of 2 , Dec 6, 2011
      • 0 Attachment
        This information is all listed in the embedded node information
        document, on page 14, as clearly as I can explain it.

        http://www.irlp.net/embedded/embedded_info.pdf

        In your case, you want to reduce your IGAIN slider. Then run

        aumix -S (capital S)
        flash_sync

        Dave Cameron
        VE7LTD

        On 04/12/2011 6:33 AM, David wrote:
        > I know most of you with probably think that this is a no-brainer, but I have not managed to find all the relevant information together in one place. As I am getting complaints from the Win system operators that audio from my node is too high, I need some guidance. Unfortunately, I don't have access to much if any test gear.
        >
        > Anyway, here goes.
        >
        > login as: root
        > root@192.168.0.10's password:
        > Linux 2.4.32-irlp.
        > root@stn5918:/root# aumix
        > aumix P+++++++++++O++++++++++++++++++++++ Vol
        > ++++++++++++++++++++++O+++++++++++<Pcm
        > Quit O+++++++++++++++++++++++++++++++++ Spkr
        > Load R++++++++++++O+++++++++++++++++++++ Line
        > Save PO+++++++++++++++++++++++++++++++++ Mic
        > Keys PO+++++++++++++++++++++++++++++++++ CD
        > Mute ++++++++++++O+++++++++++++++++++++ IGain
        > Only P++++++++++++++++O+++++++++++++++++ Line1
        > Undo +++++++++++++++++++++++++++++++++O Digital1
        > P++++++++++++++++O+++++++++++++++++ PhoneIn
        > P+++++++++++++++++++++++++++++++++O PhoneOut
        > P+++++++++++++++++++++++++++++++++O Video
        > 0 Level 100
        >
        > What does each slider control in terms of Rig-to-node, node-to-rig, node-to-internet, internet-to-node? Put another way, what is the function of each slider? Does the Vol slider affect all the others?
        >
        > Looking forward to any help you can give.
        >
        > 73 Dave G4CLI
        > --
        > Dr David J Lockwood G4CLI
        > <g4cli@...>
        > NodeOp:MB7IWR:IRLP-5918:EchoIRLP-389283
        >
        >
        >
        >
        >
        >
        >
        >
        >
      Your message has been successfully submitted and would be delivered to recipients shortly.