Loading ...
Sorry, an error occurred while loading the content.
 

Re: [irlp-embedded] Re: DTMF commands

Expand Messages
  • KC2RQR
    Thanks David                    Better late than never! FYI. The problem was attributed to the PC mother board bit the dust.
    Message 1 of 3 , Aug 19, 2010
      Thanks David
                         Better late than never!
      FYI. The problem was attributed to the PC mother board bit the dust.
                    
      73 Anton/ KC2RQR
      NE REF: 9050; node 8643
       


      --- On Tue, 8/17/10, ve7ltd <dcameron@...> wrote:

      From: ve7ltd <dcameron@...>
      Subject: [irlp-embedded] Re: DTMF commands
      To: irlp-embedded@yahoogroups.com
      Date: Tuesday, August 17, 2010, 8:21 PM

       
      Again, sorry for the delay.

      You should run the program

      ps ax

      when the machine does not seem to decode DTMF. Take note if there is a process called dtmf running.

      You should also look at the logs and see if the DTMF is being decoded incorrectly:

      tail /home/irlp/log/messages

      Dave

      --- In irlp-embedded@yahoogroups.com, KC2RQR <kc2rqr@...> wrote:
      >
      >
      >
      >
      >
      >
      > Hello to all IRLP Trekkie's,
      >                                              Node 8643 on line processing calls, except it stops processing DTMF commands on its own. Disconnect and reconnect through the console and processes DTMF again. Any ideas.
      > Puzzled in NYC 
      >
      > 73 Anton/ KC2RQR
      > NE REF: 9050; node 8643
      > www.wb2jpq.com
      >  
      >


    Your message has been successfully submitted and would be delivered to recipients shortly.