I have problems with node 6464 it seem to be when you do port test it fails the settings are correct on the modem it tells me the porst are open but there is script error there some by the sounds of it any assistance would be great.
- The troubleshoot-irlp script does not lie. If the ports are not opened to it, then it will produce errors.
It sounds to me like you have multiple routers in the chain. These days, a lot of providers are actually putting routers inside the modems they provide to you (DSL, cable, wireless).
You can often find them with a simple traceroute (but not always):
Log into your node, and type
traceroute -n irlp.net
The first two or three lines are what you want to watch:
[root@localhost ~]# traceroute -n irlp.net
1 192.168.2.1 0.852 ms 1.914 ms 2.339 ms
2 184.108.40.206 12.331 ms 12.654 ms 16.662 ms
3 220.127.116.11 17.691 ms 18.039 ms 18.186 ms
4 18.104.22.168 38.965 ms 39.328 ms 39.476 ms
Number 1 is the IP of the first hop (my router)
Number 2 is the IP if the second hop (my ISP's router)
Number 3 (ISP)
and so on
If number 2 is also a non-routable address, like 192.168.1.1 or 10.0.0.1, or 172.16.0.1, there is a CHANCE that you have a second router device in the chain between you and your ISP.
What exactly do you have hooked up between the line coming into yout house and the IRLP node?
--- In firstname.lastname@example.org, vk4mih@... wrote:
> Hi David,Â Â Â
> Â Â Â Â Â Â Â Â Â Â Â Â I have problems with node 6464 it seem to be when you do port test it fails the settings are correct on the modem it tells me the porst are open but there is script error there some by the sounds of it any assistance would be great.
> Thanks Jason