Loading ...
Sorry, an error occurred while loading the content.

RE: [irlp-embedded] new embedded node won't boot.

Expand Messages
  • louis@louis-vicki.com
    Thanks Dave, I used the supplied PS and it is booting fine. Louis ... Subject: Re: [irlp-embedded] new embedded node won t boot. From: David Cameron (IRLP)
    Message 1 of 3 , Aug 30, 2009
    • 0 Attachment
      Thanks Dave, I used the supplied PS and it is booting fine.

      Louis

      -------- Original Message --------
      Subject: Re: [irlp-embedded] new embedded node won't boot.
      From: "David Cameron (IRLP)" <dcameron@...>
      Date: Sun, August 30, 2009 11:29 am
      To: irlp-embedded@yahoogroups.com

       
      Please check my response to you direct. You say that you plugged it into
      a "12V power supply" and made your own power cable.

      You need to either use the supplied power adapter (120V to 12.0VDC), or
      run it on a 12V power supply that supplies EXACTLY 12.0V. 13.8V is too
      high, and you can damage the internal supply in the unit. You may have
      already done that accidentally.

      This is why I offer a "DC Power Option", which provides a supply that is
      very voltage tolerant (6-24VDC).

      Dave Cameron
      VE7LTD

      w7lmw wrote:
      >
      >
      > I received a new embedded node last week and tried to fire it up this
      > morning. I have it plugged into a 12v power supply and when I turn it on
      > I get a blue LED on the front, a flash of lights on the keyboard and
      > nothing else. Nothing on the monitor and no dhcp request on my router.
      > Any ideas what to check?
      >
      > Thanks,
      > Louis
      >
      >
    Your message has been successfully submitted and would be delivered to recipients shortly.