Loading ...
Sorry, an error occurred while loading the content.

Re: Will not decode DTMF tons

Expand Messages
  • node3100
    ... I m only usin the DB 9 jack. Paul Crossman WA6LVX
    Message 1 of 3 , Jun 25, 2009
    • 0 Attachment
      --- In irlp-embedded@yahoogroups.com, "David Cameron (IRLP)" <dcameron@...> wrote:
      >
      > How are you feeding the audio into the embedded node? Are you only using
      > the DB-9 connector, or are you also using the "headphone jacks" on the
      > motherboard?
      >
      > Dave Cameron
      > VE7LTD
      >
      > node3100 wrote:
      > >
      > >
      > >
      > > Node 3100 after the embedded node computer was repaired and returned
      > > from Canada the unit will not respond to DTMF tones from radio although
      > > audio is pasted through. I have tested by calling site 9990 from the
      > > keyboard then using the radio transmitted audio through to the reflector
      > > site and had it returned. Audio is transmitted and received by the node
      > > but it is not receiving DTMF I have run the command "readinput" and not
      > > seen the DTMF decoded . Help with this would most welcomed
      > > Node3100
      > > Paul Crossman
      > > WA6LVX
      > > pcic@... <mailto:pcic%40lightspeed.net>
      > >
      > >DAVE;
      I'm only usin the DB 9 jack.
      Paul Crossman
      WA6LVX
      >
    Your message has been successfully submitted and would be delivered to recipients shortly.