Loading ...
Sorry, an error occurred while loading the content.

Re: [IH CUB LoBoy Numbered Series] 222 sickle mower

Expand Messages
  • Larry Walteraitis
    thanks for your input kent. Iam going to try to put it on tomarrow
    Message 1 of 8 , Aug 17, 2013
      thanks for your input kent. Iam going to try to put it on tomarrow

      On Sat, Aug 17, 2013 at 4:44 PM, Kent Morris <kmokgm@...> wrote:

      The mower height is adjusted with the soles on the skid shoes. The hydraulic lift is used to lift mower off the grass in the field for getting into position to mow and for transport with the cutter stowed. Short story, the cutter bar drags on the ground at a fixed height.


      On Sat, Aug 17, 2013 at 3:38 PM, Larry Walteraitis <lawalteraitis@...> wrote:

      the hook up looks simple, just wondering if you can raise it with hydrolics or is it suppose to be at one level when mowing

      On Sat, Aug 17, 2013 at 3:20 PM, Kent Morris <kmokgm@...> wrote:

      If you have all the parts, mounting should be reasonably obvious. One thing you may or may not have is a mounting "ear" on the bottom of the front axle. If you don't have an "ear", there is one which clamps to the axle. A large rod with a hook on one end attaches to the front axle. The threaded end at the axle end is adjusted to obtain the correct lead of the cutter bar.
      For lifting, a chain attaches to the left rockshaft lift arm.
      One problem you may have, unless you are mowing a flat and level football field, is you only have about 3-4" of belly clearance.
      Contact www.binderbooks.com for a manual.


      On Sat, Aug 17, 2013 at 1:34 PM, wis186hydro <lawalteraitis@...> wrote:

      just bought a 222 sickle mower for my 154 loboy. wondering if anyone can tell me how it mount to the tractor. does it mount to hydrolic lift arms or frame of tractor

    Your message has been successfully submitted and would be delivered to recipients shortly.